HAAS DT 1, year of manufacture 2010, internal reference number 231656

HAAS DT 1

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 Nedjzwxz Eepfx Abwjlf 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.