Horizontal Turning Machine

HAAS ST-15

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, Functionality: fully functional, Fully functional lathe, with no issues. Serviced on time. Works mostly as a backup machine. Gbolhswax Akeccqqol

Year of construction: 2019, operating hours: 11,111 h, Condition: ready for operation (used), Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 4000 rpm Additional Equipment Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm Features: Hinged belt chip conveyor, Lathe parts catcher Coolant System: 208l coolant tank, Variable coolant flow Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN Additional Features: Macros, SOM This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Gjlhccqjwiz Rcjqobl Application Types Turning

Condition: excellent (used), Year of construction: 2019, operating hours: 10,757 h, machine/vehicle number: 3116491, Machine is in good condition, still working if there is inquire. All the time servised by authorised servise of HAAS. We are selling it as of lack of inquires. Gslhccqev Sqzdsqsbl

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Both machines have a counter spindle and an automatic chip conveyor. Both machines have a 24-tool turret. Live tools. A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Please contact us if you are interested. Gbjlhccqswg Adfjqjl

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, Bar Capacity, Maximum speed: 51mm, 4000rpm Maximum Power Rating, Drive System: 22.4kW, Belt-Drive Spindle Nose, Chuck Size: A2-6, 210mm Axis Travels (X, Z): 236mm, 533mm Gbslhevamdqoccqqol 12-Station VDI Tool Turret Haas Controller Rigid Tapping Option Automatic Tool Presetter Belt-Type Chip Conveyor Programmable Hydraulic Tailstock Manufactured in 2013 Machine in very good condition. Machine fully checked, cleaned and alligned. More pictures and movies available.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,728 h, Functionality: fully functional, machine/vehicle number: 3113678, turning length: 572 mm, turning diameter: 298 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, Equipment: documentation/manual, I will sell a haas st-20y lathe, very good condition, fully functional, ready for use Gjlowcxlqjhccqqobl

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, total height: 2,060 mm, total length: 3,200 mm, total width: 1,780 mm, overall weight: 3,500 kg, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, HAAS ST-10 + bar feeder Haas servo bar 300 Gslhcovc T R Nscqqsbl Included: Chip Conveyor, Parts Catcher, Probe arm, Tailstock We are selling some machines as we have ordered more expensive equipment, and due to limited space. The machine is in good condition and currently in use. All specifications and sizes are available online. If you have more specific questions, feel free to ask. The organization and responsibility for the transportation of goods rest entirely with the buyer. This includes arranging for transportation, selecting the carrier, and covering all related costs. Contact us for more info

Year of construction: 2019, operating hours: 3,934 h, Condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment Automatic tool probe Bar feeder with guide adapter and collets for bars Gbjlhcewhgtgjcqqol Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2021, operating hours: 3,065 h, Functionality: fully functional, machine/vehicle number: 3121061, Haas ST-20Y Turning Center (2021) - complete equipment! We offer a Haas ST-20Y turning center from 2021 in very good condition, ready to work immediately. The machine is sold with full equipment. Gbslov Uvzhohccqqol Equipment: -6 driven holders (3 axial, 3 radial) -4 holders for external knives -5 holders for internal knives -Various tools: knives, boring bars, indexable drills, cutting bars, threading knives, etc. -Bar puller -Soft and hard jaws -Sliding ring for jaw boring -Set of lathe centers -Chip ejector -Parts catcher -Programmable tailstock Technical parameters: Maximum turning diameter: 290 mm Maximum turning length: 500 mm Spindle passage diameter: 62 mm Price: EUR 70,000 net – negotiable Various financing options: -Possibility of paying the entire amount at once -Assignment of the current lease is also possible – the amount the compensation is determined individually

Condition: used, Year of construction: 2022, X - 213 mm Y - +/- 51 mm Z - 572 mm Max. swing 533 mm Max. turning diameter 298 mm Spindlebore 63,5 mm Turret w/12 stations 4 extra m-codes 15” LCD monitor Spindle orientation USB port Syncronized threading 1 GB memory HAAS Connect Ethernet Gbjlhov Inaveccqqol Media Display Subspindle Automatisk tool setter Air blowing main & subspindle WiFi camera High Intense light Chip conveyor Part catcher Chip tray filter Haas magasine bar feeder Spindle liner set for magasine bar feeder Equipped with: 4 live tools (see photos) Various tool holders (see photos) ONLY BEEN RUNNING FOR APPROX 700 HOURS - APPEARS LIKE BRAND NEW

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, Functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Gjlhcovwz T Ujcqqebl

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: ST-35, Haas ST-35 CNC lathe - precision and performance for your production -used- Increase your manufacturing efficiency with the proven quality and performance of the Haas ST-35! This robust CNC lathe offers you the perfect combination of power, accuracy and flexibility for a wide range of applications. Highlights: • Large turning diameter: Ideal for machining large and complex workpieces. • Powerful spindle: High speeds and strong torque for demanding materials. • Precise control: User-friendly Haas control for easy programming and short set-up times. • Robust design: Durable and low-maintenance - perfect for continuous use. • Flexibility: Versatile applications thanks to various tool holders and options. Perfect for: • Metalworking • Prototype construction • Small and large series production The Haas ST-35 is ready to use straight away and is waiting to take your production to the next level. Interested? Contact us now for more information or a viewing! Don't miss this opportunity - invest in quality and precision! The machine can be viewed and tested at any time by appointment. Gbelhcev Hcz Sscqqsl We also offer an assembly service including installation for you. Please refer to the attached PDF for important technical information.

Condition: good (used), Year of construction: 2014, Swing over bed 806mm, Golsvyzndehccqqobl swing over cross-slide 527mm, 381mm max. machining diameter, 533mm cutting length, 3400rpm spindle, 76mm bar capacity, 12 station turret, 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, parts catcher, Tailstock.

Year of construction: 2014, Condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 3500 rpm Spindle motor power 22 kW Number of axis 3 Media Chip conveyor Yes Gjlowgp R Ejhccqqebl Additional Equipment Part catcher Barfeeder This 3-axis HAAS ST-30 horizontal turning machine was manufactured in 2014. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this HAAS ST-30 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Functionality: fully functional, turning diameter: 420 mm, turning diameter over bed slide: 432 mm, center width: 2,032 mm, TECHNICAL DETAILS Max. turning diameter (over bed): 432 mm Max. turning diameter (over support): 420 mm Center distance: 2,032 mm Gbslhccjv Dhk Heqqsl Control system: Haas

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 3118421, turning diameter over cross slide: 330 mm, turning length: 533 mm, turning diameter: 64 mm, spindle bore: 70 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 20 W, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,998 mm, total length: 6,500 mm, total width: 2,929 mm, spindle nose: 210, For sale in EXCELLENT condition like NEW, CNC Lathe Haas St20Y with: -sub spindle -rotating tools -belt and chip conveyor -extra oil filter (Auxiliary Coolant Filter) -Parts catcher -Automatic tool measurment -Extra LED ligths at the top -Wireless Intuitive Probing System for Lathes -Chuck Air Blast -Sub-Spindle Air Blast -WiFi Connection for the Haas Control -Ethernet Interface -M-Code/MFIN Cable Assembly -CNC Control Cabinet Cooler -Spindle Orientation -32 GB Expanded Memory -bar feeder interface (bar feeder LNS as photo- not included) METRIC Rapids on X 472 ipm 12.0 m/min Rapids on Y 472 ipm 12.0 m/min Rapids on Z 945 ipm 24.0 m/min Axis Motors S.A.E METRIC Max Thrust X 4100 lbf 18238 N Max Thrust Y 2300 lbf 10231 N Max Thrust Z 5100 lbf 22686 N Spindle S.A.E METRIC Spindle Nose A2-6 A2-6 Max Rating 20.0 hp 14.9 kW Max Speed 4000 rpm 4000 rpm Spindle Bore ø 3.50 in 88.9 mm Main Spindle C Axis S.A.E METRIC Golhccqjuykdroqobl Max Rating 5.0 hp 3.7 kW Max Speed 60 rpm 60 rpm Positioning (±) 0.01 ° 0.01 ° Brake Diameter 13.9 in 353 mm Brake Holding Torque 250 ft-lbf 339 Nm Control Type Interpolated Motion and Positioning Interpolated Motion and Positioning Sub-Spindle S.A.E METRIC Chuck Size 5.3 in 135 mm Spindle Nose A2-5 A2-5 Max Speed 6000 rpm 6000 rpm Max Sync Speed w/Main Spindle 4800 rpm 4800 rpm Chuck Throat Ø 1.30 in x 1.37 in DEEP Ø 33.0 mm x 34.8 mm DEEP Drawbar Bore (non-through) Ø 1.00 in x 1.50 in DEEP Ø 25.4 mm x 114.3 mm DEEP Spindle Bore (without chuck and drawbar installed) 1.50 in 38.1 mm Integrated Brake Torque 17 ft-lbf 23 N/m Spindle Orientation Accuracy (Requires SO) ± 0.02 ° ± 0.02 ° Rapids (B-axis) 400 ipm 10 m/min Turret S.A.E METRIC Number of Tools 12 Stations 12 Stations OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret) Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm Live Tooling S.A.E METRIC Max Speed 4000 rpm 4000 rpm Tooling BMT65 BMT65 General S.A.E METRIC Coolant Capacity 55 gal 208 L Air Requirements S.A.E METRIC Inline Air Hose 3/8 in 3/8 in Coupler (Air) 3/8 in 3/8 in Air Pressure Min 80 psi 5.5 bar Electrical Specification S.A.E METRIC Spindle Speed 4000 rpm 4000 rpm Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive Spindle Power 20.0 hp 14.9 kW Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC Full Load Amps (3 Phase) - Low 40 A 40 A Input AC Voltage (3 Phase) - High* 440 VAC 440 VAC Full Load Amps (3 Phase) - High* 20 A 20 A Dimensions - Shipping S.A.E METRIC Domestic Pallet 143.0 in x 90.0 in x 92.0 in 363 cm x 229 cm x 234 cm Export Pallet 143.0 in x 90.0 in x 92.0 in 364 cm x 229 cm x 234 cm Weight 10480 lb 4754.0 kg

Condition: good (used), Year of construction: 2018, operating hours: 9,000 h, CNC lathe, Haas ST-30Y, year 2.018. Equipped with mist extractor, chain chip extractor, tailstock, parts collector... Gslhcevk T Ikecqqsbl

Condition: excellent (used), Year of construction: 2020, Swing 533mm, Gbolhcjvygv Hscqqsl 298mm max. machining diameter, 572mm cutting length, 3400rpm spindle, 76mm bar capacity, 12 station turret, Y axis -/+ 50.8mm, 22.4kW spindle motor, HAAS control, 254mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, barfeed unit.

Year of construction: 2019, Condition: ready for operation (used), General Data Machine weight 7200 kg Control Unit Brand HAAS Main Drive Spindle speed range 4500 RPM Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 406 mm Y-Axis Movement 381 mm Z-Axis Movement 406 mm Gbslhowctypoccqqjl Tools Number of index 12 Max tool diameter 203 mm Max tool length 400 mm This 3-axis HAAS ST-30Y was manufactured in 2019, offering advanced capabilities for efficient horizontal turning. Ideal for complex machining tasks, this machine ensures precision and reliability. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Functionality: fully functional, turning diameter: 420 mm, turning diameter over bed slide: 432 mm, center width: 2,032 mm, TECHNICAL DETAILS Max. turning diameter (over bed): 432 mm Max. turning diameter (over support): 420 mm Center distance: 2,032 mm Control system: Haas Gslhcevwb Ncscqqebl

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, 63.5mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant, Gelhju Hya Aoccqqjbl

Year of construction: 2014, Condition: ready for operation (used), Main Drive Number of axis 4 Media Chip conveyor Yes Additional Equipment USB Port Chip Conveyor High-Pressure Coolant, 300 psi (21 bar) Gbslhjv S Nfzsccqqel Part Catcher This 4-axis HAAS ST-30Y was manufactured in 2014, featuring a 10" chuck, a spindle speed up to 3400 rpm, and a powerful 22.4 kW motor. It includes a turret with 12 stations, a programmable hydraulic tailstock, and high-pressure coolant at 300 psi. Ideal for complex turning operations, consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2014, Swing 876mm, maximum cutting diameter 648mm, 2032mm maximum cutting length, Gbjlhcju Iap Tocqqel 102mm Bar capacity, 3 jaw chuck, 40HP Spindle Motor, 2,400rpm spindle, 18m/minute rapid feedrates, 12 Station turret, swarf conveyor, tailstock

Year of construction: 2015, operating hours: 474 h, Condition: ready for operation (used), Control Unit Brand HAAS Gbslhcevtt D Djcqqol Main Drive Spindle speed range 6000 Number of axis 2 Media Chip conveyor Yes Additional Equipment 15" color LCD monitor Memory lock key USB port Rigid tapping HPC 1 High-pressure coolant system, 300 psi (21 bar) PC1 Parts catcher SO 1 Spindle orientation VDIBAR1006ST Bar feeder for specific lathe 1.75 INSTALL KIT Bar feeder installation kit This HAAS ST 10 was manufactured in 2015. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST 10 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2020, Condition: like new (used), Swing over bed 641mm, 229mm max. machining diameter, 356mm cutting length, Golomtykqohccqqjbl 6000rpm spindle, 44mm bar capacity, 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, C axis & Milling, HAAS control, 3 jaw chuck, coolant, swarf conveyor, Tool Setter