Horizontal Turning Machine

HAAS ST-20Y

Condition: as good as new (ex-display), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 3118421, turning diameter over cross slide: 330 mm, turning length: 533 mm, turning diameter: 64 mm, spindle bore: 70 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 20 W, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,998 mm, total length: 6,500 mm, total width: 2,929 mm, spindle nose: 210, For sale in EXCELLENT condition like NEW, CNC Lathe Haas St20Y with: -sub spindle -rotating tools -belt and chip conveyor -extra oil filter (Auxiliary Coolant Filter) -Parts catcher -Automatic tool measurment -Extra LED ligths at the top -Wireless Intuitive Probing System for Lathes -Chuck Air Blast -Sub-Spindle Air Blast -WiFi Connection for the Haas Control -Ethernet Interface -M-Code/MFIN Cable Assembly Guslhcdsuykdrowzjc -CNC Control Cabinet Cooler -Spindle Orientation -32 GB Expanded Memory -bar feeder interface (bar feeder LNS as photo- not included) METRIC Rapids on X 472 ipm 12.0 m/min Rapids on Y 472 ipm 12.0 m/min Rapids on Z 945 ipm 24.0 m/min Axis Motors S.A.E METRIC Max Thrust X 4100 lbf 18238 N Max Thrust Y 2300 lbf 10231 N Max Thrust Z 5100 lbf 22686 N Spindle S.A.E METRIC Spindle Nose A2-6 A2-6 Max Rating 20.0 hp 14.9 kW Max Speed 4000 rpm 4000 rpm Spindle Bore ø 3.50 in 88.9 mm Main Spindle C Axis S.A.E METRIC Max Rating 5.0 hp 3.7 kW Max Speed 60 rpm 60 rpm Positioning (±) 0.01 ° 0.01 ° Brake Diameter 13.9 in 353 mm Brake Holding Torque 250 ft-lbf 339 Nm Control Type Interpolated Motion and Positioning Interpolated Motion and Positioning Sub-Spindle S.A.E METRIC Chuck Size 5.3 in 135 mm Spindle Nose A2-5 A2-5 Max Speed 6000 rpm 6000 rpm Max Sync Speed w/Main Spindle 4800 rpm 4800 rpm Chuck Throat Ø 1.30 in x 1.37 in DEEP Ø 33.0 mm x 34.8 mm DEEP Drawbar Bore (non-through) Ø 1.00 in x 1.50 in DEEP Ø 25.4 mm x 114.3 mm DEEP Spindle Bore (without chuck and drawbar installed) 1.50 in 38.1 mm Integrated Brake Torque 17 ft-lbf 23 N/m Spindle Orientation Accuracy (Requires SO) ± 0.02 ° ± 0.02 ° Rapids (B-axis) 400 ipm 10 m/min Turret S.A.E METRIC Number of Tools 12 Stations 12 Stations OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret) Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm Live Tooling S.A.E METRIC Max Speed 4000 rpm 4000 rpm Tooling BMT65 BMT65 General S.A.E METRIC Coolant Capacity 55 gal 208 L Air Requirements S.A.E METRIC Inline Air Hose 3/8 in 3/8 in Coupler (Air) 3/8 in 3/8 in Air Pressure Min 80 psi 5.5 bar Electrical Specification S.A.E METRIC Spindle Speed 4000 rpm 4000 rpm Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive Spindle Power 20.0 hp 14.9 kW Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC Full Load Amps (3 Phase) - Low 40 A 40 A Input AC Voltage (3 Phase) - High* 440 VAC 440 VAC Full Load Amps (3 Phase) - High* 20 A 20 A Dimensions - Shipping S.A.E METRIC Domestic Pallet 143.0 in x 90.0 in x 92.0 in 363 cm x 229 cm x 234 cm Export Pallet 143.0 in x 90.0 in x 92.0 in 364 cm x 229 cm x 234 cm Weight 10480 lb 4754.0 kg

Condition: ready for operation (used), Year of construction: 2019, Y-axis, C-axis, chuck, tailstock, chip conveyor Gjlhswkug Tecdwzeuc

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Both machines have a counter spindle and an automatic chip conveyor. Guslhewg Adfocdwzec Both machines have a 24-tool turret. Live tools. A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Please contact us if you are interested.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,728 h, Functionality: fully functional, machine/vehicle number: 3113678, turning length: 572 mm, turning diameter: 298 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, Equipment: documentation/manual, I will sell a haas st-20y lathe, very good condition, fully functional, ready for use Gjlhcdwewcxlqjzjuc

Condition: excellent (used), Year of construction: 2021, operating hours: 3,065 h, Functionality: fully functional, machine/vehicle number: 3121061, Haas ST-20Y Turning Center (2021) - complete equipment! We offer a Haas ST-20Y turning center from 2021 in very good condition, ready to work immediately. The machine is sold with full equipment. Equipment: -6 driven holders (3 axial, 3 radial) -4 holders for external knives -5 holders for internal knives -Various tools: knives, boring bars, indexable drills, cutting bars, threading knives, etc. -Bar puller -Soft and hard jaws -Sliding ring for jaw boring -Set of lathe centers -Chip ejector -Parts catcher -Programmable tailstock Technical parameters: Maximum turning diameter: 290 mm Guelev Uvzhjhcdwzsc Maximum turning length: 500 mm Spindle passage diameter: 62 mm Price: EUR 70,000 net – negotiable Various financing options: -Possibility of paying the entire amount at once -Assignment of the current lease is also possible – the amount the compensation is determined individually

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, Functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Gelhcdwovwz T Uezsuc

Year of construction: 2013, operating hours: 10,997 h, Condition: ready for operation (used), Movement X-Axis Movement 200 Y-Axis Movement 51 Z-Axis Movement 406 Guelhcdswr N A Sjwzsc Additional Equipment KSS Filter / Tool Trolley / 25 VDI 40 Tool Holders (2 pcs. driven) / Renishaw Touch Probe / Probe Tool This 3-axis HAAS ST-10Y horizontal turning machine was manufactured in 2013. It features a hydraulic lathe chuck of 165 mm, turning diameter of 419 mm, and a 12-station turret with 6 driven tools. With a spindle speed of up to 6000 rpm and a total runtime of 10,997 hours, consider the opportunity to buy this HAAS ST-10Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2013, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrates, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant Gujlhcjwq Iqljdwzjc

Condition: used, Year of construction: 2022, X - 213 mm Y - +/- 51 mm Z - 572 mm Max. swing 533 mm Max. turning diameter 298 mm Spindlebore 63,5 mm Turret w/12 stations 4 extra m-codes 15” LCD monitor Spindle orientation USB port Syncronized threading 1 GB memory HAAS Connect Ethernet Media Display Subspindle Automatisk tool setter Air blowing main & subspindle WiFi camera High Intense light Chip conveyor Part catcher Chip tray filter Haas magasine bar feeder Gujlhev Inavecdwzsc Spindle liner set for magasine bar feeder Equipped with: 4 live tools (see photos) Various tool holders (see photos) ONLY BEEN RUNNING FOR APPROX 700 HOURS - APPEARS LIKE BRAND NEW

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 2290 mm Measurements depth 4350 mm Measurements height 2490 mm Gujlhcewr Nyksdwzoc Machine weight 4944 kg Control Unit Brand HAAS Main Drive Spindle speed range 3400 Spindle motor power 224 kW Spindle bore 88.9 mm Tool taper A2-6 Number of axis 2 Movement X-Axis Movement 239 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 826 mm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 1 Tools Number of station 12 This HAAS ST-30 was manufactured in 2012. A robust horizontal turning machine, it features a spindle speed of 3400 rpm and a bar capacity of 100 mm. It includes a 12-position turret and a motor power of 22.4 kW. Dimensions are 4350 mm in length, 2290 mm in width, and 2490 mm in height, weighing 4944 kg. Consider the opportunity to buy this HAAS ST-30 horizontal turning machine. Contact us for more information about this machine. Application Types Turning