Sheet shears HACO HSL3006, 3000x6mm 2011

HACO

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Redpfx Aezhuvyjnpew Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Capacity: 3050 x 12 mm Redpjzhbglsfx Anpew Adjustable back gauge Blades recently sharpened

Condition: used, Year of construction: 1992, Used 4-meter CNC press brake from Haco Rodpfx Anozgt Tzepsw Type: PPES 40200 Capacity: 4100 x 200 tons FastBend 2D CNC control (refurbished!) 1 set of complete tooling (not visible in the pictures, but included) CNC crowning Euro-style tool clamping system

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm Rodpexaa Dgofx Anpew back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: used, Year of construction: 1991, machine/vehicle number: 91033420, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, working width: 3,050 mm, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Electric length stop Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). Redpfozdzh Uox Anpsw If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T Rsdpfjzdiiuex Anpew

Condition: used, Year of construction: 2018, HACO EMS30100 press brake Rjdpfx Asynkxlenpjw

Condition: good (used), Year of construction: 2015, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 90 engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good / well-maintained condition (!!) Current list price approx. 80.000 euros Features: - Electro-hydraulic / slide-guided guillotine shear Rsdpszczgcsfx Anpew - HACO CNC control model "SC 90" * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulic hold-down devices - Front finger guard - Ball bearings in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety guard (no light barrier) - Operating instructions in German (PDF)

Condition: ready for operation (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Rsdpfey Nd Tyjx Anpew Control ATS 585 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - ?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: ready for operation (used), Year of construction: 2002, pressure 200 t chamfer lenght 3100 mm distance between columns 2550 mm stroke of upper beam 200 mm throat 300 mm dayligth 440 mm working feed 9.0 mm/sec return speed 80.0 mm/sec 265 bar Control konv. work height max. 965 mm total power requirement 15.0 kW weight 10500 kg range L-W-H 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - ?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left Rodpfx Aneyu U A Uepew - electric, infinitely variable depth adjustment (Y1 Y2 axis) * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)