Press Brake

Haemmerle AP 100-3100

Year of construction: 1990, Condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical data: - Pressure capacity 2000 kN - max working width 3100 mm Gislhsbbwznjccqteu - bar passage 3200 mm - max. outreach 300 mm - max installation height 965 mm - stroke, resp. offset infinitely variable 0 - 400 mm - ram speed forward + backward 100 mm/sec each - Working speed selectable in 9 steps - 1 10 mm/sec - Drive 400 V / 26,5 kW - space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg - with: - CNC - control CYBELEC ModEva 15S year 2007 - back gauge with 4 controlled pneum. lateral - and height adjustable stop fingers - controlled bending aids in the stop area - Hydr. - pneum. Clamping of the upper tool + - lower tool - mot. Crowning / hydro cushion in the table - laterally movable support arms - E - foot switch - split pointing tool R 1-100 t/m , split die

Year of construction: 2001, Condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Gielhccqelzizmstju

Condition: excellent (used), Year of construction: 2003, Hämmerle AP 250-2100 Series 3 Year of construction: 1988, overhauled with CE and new control in 2003 With electronically controlled press ram and NC back gauge system Gislhcehw Rbzecqtsu Control: Adcoband including new switch protection and safety monitoring in connection with stop system A2. Pressing force: 2,500 kN folding length: 2.100 mm weight: 22.000 kg height: 3.100 mm width: 2.900 mm Length: 3.400 mm Offer on demand

Condition: used, pressure 200 t Gislhov S Irmsccqtou chamfer lenght 3100 mm distance between columns 2750 mm stroke 400 mm throat 300 mm oil volume 330 l total power requirement 18,5 kW weight of the machine ca. 18500 kg dimensions of the machine ca. 4300 x 2400 x 3600 mm

Condition: used, Functionality: limited functionality, machine/vehicle number: 21196, pressing force: 35 t, bending length: 3,100 mm, throat depth: 400 mm, overall weight: 6,050 kg, input voltage: 380 V, ram stroke: 265 mm, working length: 1,600 mm, Manufacturer: Hämmerle AG Designation: Hydraulic press brake Type: AP 35-1600/S4D M-No.: 21196 Gslhewptf Sjccqtoiu Year of manufacture: unknown Current condition: used, operational Weight: 6 tons Drawings and circuit diagrams are available and will be handed over on purchase. However, there is no longer a machine manual. The machine is available immediately. The sale is ex works: dismantling, removal, loading and transportation are the responsibility of the buyer.

Year of construction: 1998, Condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Giolhowhp Ndjccqteu

Condition: used, Year of construction: 1989, Technical details: pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2300 mm throat: 300 mm control for program: CNC-Steuerung DNC7000 dayligth: 830 mm max. stroke: 265 mm ajustment speed: 80 - 100 mm/sec back gauge: motorisch table-size: 2700 x 113 mm work height max.: 900 mm connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: 11,3 t machine dimensions LxWxH: ca. 3,2 x 3,8 x 3,0 m Gelju Icdmshccqtjiu 3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on the boom can be swivelled and/or control stand with two-hand and foot control various press brake tools available i.D. *

Condition: good (used), Functionality: fully functional, Year of construction: 2010, operating hours: 21,825 h, pressing force: 150 t, throat depth: 250 mm, Application until 15.12.2024 - Bid submission obliges timely collection Very extensive range of tools included in the scope of delivery (see pictures) TECHNICAL DETAILS General information Make: Hämmerle Type: 3P 150/3100 Year of construction: 2010 Capacity and working area Bending length: 3100 mm Pressing force: 150 t Stroke: 400 mm Usable installation height: 915 mm Free upright clearance: 3200 mm Projection: 250 mm Speed Y rapid traverse: up to max. 180 mm/s Y-operation: 1-10 mm/s Y-retraction: 150 mm/s Working height and control Working height: 1060 mm Control system: MMC Bybend Operating data Operating hours: 21,825 h Dimensions and weight Length: 4810 mm Width: 2320 mm Height: 3345 mm Weight: approx. 15,000 kg EQUIPMENT Operator terminal: 15" TFT-LCD flat screen, network card, Windows XP, MMCBybend software Machine frame: Torsion-free steel screw construction Upper beam guide: Roller bearings with case-hardened guide rails Measuring system: High-resolution system Tool clamping: Hydraulic quick clamping for upper and lower tools Quick clamping of upper tools: Integrated scale Lower tool holder: Hämmerle 3-point Table displacement: Hydraulic Safety system: AKAS laser, motorized height adjustment Side safety guards: Electrical monitoring Light curtain: At the rear Back gauge system: 5 axes with 2 stop arms and angular adjustable stop fingers Workpiece supports: 2 manually adjustable supports, length 750 mm Linear guide: On the lower beam, with two parking spaces (250 mm each) Control panel: With foot switch Support arm for operating terminal: Double joint, height-adjustable Extended equipment Giolhcou Rbr Iecqtju Rear of machine: Rear bending aid, infinitely programmable for H, a, W axes, 0-75° Additional bending aid: Rear Accessories for the machine Work area lighting: LED front and rear Barcode scanner: For calling up bending parts, programmed via Bybendpart

Year of construction: 1990, Condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Gieljwftdashccqteu

Year of construction: 1991, Condition: ready for operation (used), Max. pressing force: 2000kN, max. working length: 2600mm, max. stroke: 265mm, throat depth: 300mm, weight: 16t. Gelhjhkdu Hsccqteiu