Powder coating plant

Handelsagentur Klaus Benecke Starterpaket für Felgen usw.

1. powder coating oven 1,500 x 1,200 x 1,750 mm
2. powder coating booth -KG DUO-01
3. powder coating system Wagner, - Prima Sprint -

1. powder coating oven 1,500 x 1,200 x 1,750 mm
1 Internal dimension length 1,500 mm
2 Internal dimension width 1,200 mm
3 Internal height 1,750 mm
4 External dimension incl. thermoblock length 2,250 mm
5 External dimension incl. thermoblock width 1,815 mm
6 External dimension incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust air pipe
7 Substructure 1 set of steel profiles
8 Walls 1 set of 1 mm galvanized sheet metal on both sides, RAL outside
9 Insulation walls, ceiling 1 set rock wool 150 mm, floor is insulated with 50 mm
10 Oven floor with 2 run-in rails for rack trolleys
11 Temperature 220°C
12 Fans 1 unit 2,600 m³/hour
13 Electric motors 1 pc. 1.1 kW, 1450 rpm, 3 F, 50 Hz
14 Thermal output 14 kW
15 Hinged doors on one side 2 insulated with 100 mm rock wool
Indirect heating via thermoblock
Thermoblock 1 set stainless steel INOX AISI 316 Heating electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection
16 burners 1 oven is electrically heated
1 exhaust air 1 piece device for exhaust air pipe, manual flap guide

2. powder coating booth -KG DUO-01
The overspray during powder coating is collected by the extraction unit.
The workpieces are hung on a hook in the booth.
- The extraction unit is equipped with a 30 l powder container (rollbar).
- There are 2 filters in the extraction unit as the 1st stage.
- The 2nd stage in the extraction unit is the high-pressure fan.

1 Dimensions of the powder stand Width 1,200 mm
Depth 1,100 mm
Height 2,380 mm
2 fans 1 pc. 2,500 m³/hour, 1,500 Pa
Electric motor 1.1 kW, B5, P2, 380 V
3 Filter Φ 325x600 2 pcs. type filter cartridges
4 Electromagnetic valves 1 pc. 1" "Turbo" Italy
5 Illumination 1 pc. 2x18 Watt= 36 Watt

3. powder coating unit Wagner, - Prima Sprint -
1 Dimensions of the Prima Sprint Depth 725 mm
Width 480 mm
Height 1.100 mm
Weight Approx. 39 kg
Mains standard 230 VAC
Frequency 50 - 60 Hz
Inlet compressed air 6-8 bar
Outlet compressed air 0.05 - 5.5 Nm³/hour
- Corona hand gun
PEM-C4 Ergo
Dcedpfofhxd Uex Acwon
- EPG-Sprint control unit
- Delivery device with fluid crown ST 550/10
- Powder injector PI-F1
- Equipment cart with vibrating table

The listing was translated automatically. Translation errors are possible.