Machining Centre

Heller BEA 1

Condition: used, Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 31-46910-00, Heller MCi16.1 No. 31-46910-00, Year of Manufacture: 2005 Spindle speed: 12,000 rpm HSK63 Travel range: X 630 mm Y 630 mm Z 630 mm Travel speed: 1-40,000 mm/min Number of tools: 354 Tool diameter: 70/150 mm (with free adjacent locations) Tool length: 320 mm Iajlhccqewfftmjrjt Number of pallets: 2 Pallet dimensions: 400x500 mm Max. pallet load: 500 kg B-axis NC Sinumerik 840D control system Tool breakage detection: Yes Heidenhain measuring probe: Yes Power: kVA: 69

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Iolhccovzt E Reqroat Control Siemens Sinumerik 840 D weight of the machine ca. 12000 t dimensions of the machine ca. 6,5 x 3,6 x 3,5 m

Condition: used, Door opening button, push button, door opener, automatic door sensor -Manufacturer: eao, opening and presence detector for railway interior doors ovp Iajlhccqsud Du Nsret -Type: RS-1 Hitachi -Technology:Active infrared -Technical data: see photo -Transport dimensions: 200/140/H40 mm -Weight: 0.1 kg

Condition: good (used), OFFER 70105 Technical data: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm - 2 x 68 , 2 x 80 , 81 , 85 mm - oblong hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Punch holder 58 mm Iajlog T S Axjhccqrjt - punch height 54 + 58 mm - Adapter ring for punch - die height 30 + 40 mm - die outer diameter 90 + 140 mm - adapter ring for dies 90 - 140 mm - Weight approx. 90 Kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Islhccoiqhhvjqrsat -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm Iajlhoiqhh Dsccqret -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Condition: excellent (used), Functionality: fully functional, mileage: 218,413 km, fuel type: diesel, color: red, maximum load weight: 3,645 kg, Year of construction: 2005, operating hours: 2,400 h, Equipment: ABS, central locking, immobilizer system, parking heater, We are pleased to present a Scania street sweeper with a Jonhston Beam VX800 body. The car has undergone a thorough service and refreshment. The engine and gearbox work EXCELLENTLY. It was constantly serviced in the workshop of the company that has used it from the beginning. The sweeper is equipped with a front and rear watering can + an extra nozzle for salt or similar. It has a brush under the vehicle and an arm extending from the right side. Additionally, it has a powerful vacuum cleaner. All documents for registration on our side, including: Technical inspection (as a SPECIAL vehicle) and vehicle documents. We accept various forms of payment such as the above or classic cash. Additionally, we deal with insurance. Iaolhcjv R Encscqrot We are also able to deliver this truck to your door. Dimensions and weights: GVW: 18000 kg (designed 20000 kg) Current weight: 14355 kg Payload: 3645 kg Dimensions: Length: 675 cm Width: 250 cm Height: 310 cm Wheelbase: 395 cm Equipment: JOHNSTON VX800 bodywork (one of the best on the secondary market) Cruise control Steering wheel on the right Automatic gearbox Bodiment control in the cabin Reversing camera 2 Seats Suspended bed On-board computer Retarder (engine brake) Electric windows and mirrors Heated driver's seat Orange lighting on the roof Additional external lighting Fog lights Report from inspection: The truck came from Denmark on wheels WITHOUT any problems. The Scania was checked by us and is in very good technical condition. It has low original mileage. Of course, the vehicle is accident-free! It is currently on winter wheels in the size: 315/80-22.5 tread condition approx. 70%. Attention! The price given is in the net value and is valid for Export and for companies. A large discount is possible for individual customers - We invite you to contact us directly by phone, so that you can get your best price :) After price negotiations, we are able to record a video or perform a computer test or paint meter test in detail for a determined customer, so that you can calmly buy the equipment remotely. — Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe form of transaction. Dear Customer: At the same time, be aware that long-term used equipment often has its own features or defects, all of which we are unable to repair. That is why we do not write in our advertisements such phrases as most sellers such as: "showroom condition" or "does not require any financial contribution", because it is simply not true, and new cars are in fact available in the showroom at a price that is often several times more expensive. We provide professional, free advice and are characterized by an individual approach to the Client. We will always give you reliable advice even if you are in arrears with repayments or are in the Bik and Krd databases. -We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE ANNOUNCEMENT.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Iaelopbvgtjhccqrjt Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet rack traverse: Shelving system: Ohra Type: 1 Included in delivery are: Iaelhccqelhqbcorot 01x pallet rack traverse, used Material color: blue INP profile: 80 x 42 mm execution: head traverse agraffe: 3 HK (hooks) clear width: 2.700 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data for the pallet rack traverse: Shelving system: Ohra Type: 1 Included in delivery are: 01x pallet rack traverse, used Material color: light blue INP profile: 80 x 42 mm agraffe: 3 HK (hooks) Iaolhccqslhqdqsrst clear width: 2.700 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Year of construction: 1992, Condition: used, Technical details: lifting capacity : 2,0 t lifting height max. hook position: 2,3 m travel of hook: max. 3000 mm wheel base: 520 mm total power requirement: 2,3 kW Crane with carrier and electric rails: -double - T - beam 200 x 200mm, length approx. 10.100mm, travel 9.000,00 mm -Steel lifting gear, load capacity 2000kg, lifting class DIN 15018, lifting speed 0.80 / 5 m/min, lifting height 3 m, travel speed 10 / 2.5 m/min, track 200mm, axle distance 520mm, Chain hoist, hook Ijlhceu Nvgdecqrsat -Pendant control panel Pendant station -div. mounting holes *

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm Iolhccqot Sn Azeroat

Condition: excellent (used), Bead mill Drais PM 1 RL-V Ex-protected version Iaolhccek D Ac Eeqrjt grinding tank 1,3 l power agitator 2,5 kW with feed pump Revision in 2005 Very good condition, directly from production!!!

Condition: good (used), beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg Isljcmtntshccqrjat

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 2788, Crosscut saw diam. 300 mm Milling spindle diam. 40 mm sliding table with Festo length stop suction nozzle saw 120 mm Ijlsiau I Sjhccqreat dto.cutter 140 mm cable + plug 16 Amp, without operating tool Unfortunately, we can not answer inquiries without complete contact information.

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: max. 450 mm -Load capacity: 1,000 kg Iaslhsd Hb Icjccqret -Number: 2x available -Price: per piece -Weight: 8 kg

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Ijlot Hakgjhccqroat Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Iaelowiwklohccqrjt Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Machines are currently in production and can be viewed by appointment.

Condition: like new (used), Year of construction: 2017, operating hours: 2,700 h, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: Siemens, controller model: 840 D SL, table width: 500 mm, table length: 400 mm, table load: 600 kg, Equipment: chip conveyor, documentation/manual, The machine is in mint condition. Internal cooling Siemens 840 DSL Iaolhcewkwntscqrot

Condition: used, Year of construction: 2016, operating hours: 60,000 h, Functionality: fully functional, Heller FMS with 2 x H2000 Iajlswh Td Eshccqrst Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: HSK63 Magazine / positions: Chain magazine / 160 positions Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK63 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: ready for operation (used), Year of construction: 1998, Main Drive Spindle speed range 16000 Number of axis 4 Movement X-Axis Movement 630 Y-Axis Movement 630 Z-Axis Movement 630 Table Table load 500 kg Tools Ielhcewh A Nwecqrsat Max tool diameter 72 mm Max tool length 320 mm This 4-axis HELLER MC 16 horizontal machining center was manufactured in 1998. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 50 mm arm length 1250 mm Iaslowi Uplshccqrst total power requirement 4 kW

Condition: like new (used), Year of construction: 2003, Functionality: fully functional, power: 4 kW (5.44 HP), type of input current: AC, input voltage: 400 V, heating capacity: 1,550 kW (2,107.41 HP), fuel: domestic gas H, frequency: 50 Hz, protection type (IP code): IP40, Gas burner: Weishaupt G7/1-D with complete assembly. version:ZMD-LN year of manufacture: 2003 heat output: min 250- max 1550kw gas connection pressure: min 15- max 500Mbar gas type: natural gas flame tube diameter: flame tube length: gas control valve: DUNGS DMV-D 5065/11 pressure switch: Dungs LGW 50 A2P Iaolhccqov H Rqnsret Siemens SQM10.16562 Damper actuator Tightness tester Dungs VPS-504 S04 with gland Tightness tester Dungs VPS-504 S04 Electrical output: 4.07 kw control voltage: 230v 50Hz 1 phase mains voltage: 400v 50Hz 3 phase

Condition: used, Engine power: 4.0 PS/HP (3.0 kW), Year of manufacture: 2021, Engine voltage: 3x 400 V, Engine frequency: 50 Hz, Sanding belt length: 2600 mm, Sanding belt width: 150 mm Iaelhswhb T Ieccqrot

Condition: used, Year of construction: 2002, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 710 mm Tool bore: SK 50 turning speed range: stufenlos 45 - 12000 U/min Iaelhcowg H Hwscqrst size of pallet: 500 x 630 mm tools in tool magazin: 52 weight of the machine ca.: 15 t total power requirement: 62 kW Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *