Hewlett Packard Type: HP Jet Fusion 540

Hewlett Packard HP Jet Fusion 540 3D Printer

Condition: good (used), Functionality: fully functional, Total length: 1,300 mm, Total height: 2,100 mm, Total width: 2,300 mm, Overall weight: 945 kg, This unit is sold as a complete set along with Cleaning Station (2.2x1.2x1.5m), two Building Stations, two grey barrels and a pallet of inks. This would be sold as seen. It would come with no guarantee or warranty and would need to be collected from Wellingborough, Northamptonshire at your cost. The unit can be examined at our site in Wellingborough. Dnblsj

Condition: good (used), Technical specifications Bv2Cjqoczn • Print speeds: - Outdoor-quality prints: approximately 800 square feet per hour (70 square meters per hour)(8) - Indoor-quality prints: approximately 400 square feet per hour (35 square meters per hour)(8) • Print resolution: Up to 1200 x 600 dpi • Media - Handling: Roll feed - Types: supports most low-cost, uncoated, solvent-compatible media - Size: Up to 2.64m (104 inches) wide - Loading: Up to 110 kg (242 lb), up to 25 cm (9.8 inch) outside diameter • Printing - Six-ink printing with HP 786 3-liter Latex Designjet Ink Cartridges: cyan, magenta, yellow, light cyan, light magenta and black. - Three total HP Wide Scan Printheads (each contains two colors – cyan/black, yellow/magenta, light magenta/light cyan) - Ink Type: HP Latex Inks - Nozzles: 10,560 per printhead - Outdoor display: up to 3 years unlaminated, 5 years laminated(2) on a range of media - Indoor display: up to 5 years unlaminated, 10 years laminated(2) on a range of media - Ink drop: 12 picoliters • The HP 786 Designjet Maintenance Kit, including a printhead cleaner roll and two air filters, keeps the HP Designjet L65500 printer operating at peak performance. • Interfaces: Gbit Ethernet

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Equipment: Documentation/Manual, HP DesignJet Z6dr PS large format printer 44" used device in very good condition functionally and qualitatively flawless, optical defects can be seen on the last two photos checked and updated by HP dealer only 350 m² including base frame & collection basket including ready-to-use print heads and ink tanks new supplies and print media optionally available Inspection and collection in Berlin The most secure and powerful HP DesignJet printer for graphic arts applications. With HP Secure Boot, Whitelisting etc. you can protect your printer or data from unauthorized access. It is also possible to use a card reader or PIN printing to further protect your printer and ensure that confidentiality is maintained. Special highlight: the combination of horizontal and vertical cutting device enables the production of completely finished cut formats! Technical specifications HP thermal inkjet printer Dye-based (C, M, Y, PK, G); pigmented (mK) Speed 80.5 m²/h on uncoated, 18.8 m²/h on coated and 9.7 m²/h on glossy coated media Print resolution up to 2,400 x 1,200 dpi (optimized) 3 universal print heads, 2 colors each Two rollers: Single sheet feeder, two automatic roll feeders (automatic roll change), media tray, automatic horizontal cutter, automatic vertical cutter Roll size 279 to 1118 mm, max. roll diameter 135 mm Sheet size 210 x 279 to 1118 x 1676 mm E2Orgwy Grammage 80 to 500 g/m² Memory 128 GB (virtual) Hard disk 500 GB with self-encryption

Condition: excellent (used), Functionality: fully functional, Equipment: Documentation/Manual, HP DesignJet T1700 PS large format printer 44" used device in very good condition checked and updated by HP dealer mileage 5.600 m² including underframe & collection basket Including ready-to-use print heads and ink tanks New consumables and print media optionally available Inspection and collection in Berlin Nrfokotle The most secure and powerful HP DesignJet printer for CAD/GIS workgroups. With HP Secure Boot, Whitelisting etc. you can protect your printer or data from unauthorized access. It is also possible to use a card reader or PIN printing to further protect your printer and ensure that confidentiality is maintained. Technical specifications HP thermal inkjet printer Dye-based (C, M, Y, PK, G); pigmented (mK) Speed 116 A1 pages/hour, 26 sec/A1 page Print resolution up to 2,400 x 1,200 dpi (optimized) 3 universal print heads, 2 colors each Single sheet feeder, automatic roll feeder, media tray, automatic horizontal cutter Roll size 279 to 1118 mm, max. roll diameter 135 mm Sheet size 210 x 279 to 1118 x 1676 mm Grammage 60 to 328 g/m² Memory 128 GB (virtual) Hard disk 500 GB with self-encryption

Condition: excellent (used), Functionality: fully functional, Equipment: Documentation/Manual, HP DesignJet T1700dr PS large format printer 44" used device in very good condition checked and updated by HP dealer only 1.300 m² including underframe & collection basket including ready-to-use print heads and ink tanks new consumables and print media optionally available Inspection and collection in Berlin The most secure and powerful HP DesignJet printer for CAD/GIS workgroups. With HP Secure Boot, Whitelisting etc. you can protect your printer or data from unauthorized access. It is also possible to use a card reader or PIN printing to further protect your printer and ensure that confidentiality is maintained. Technical specifications HP thermal inkjet printer Dye-based (C, M, Y, PK, G); pigmented (mK) Speed 116 A1 pages/hour, 26 sec/A1 page Print resolution up to 2,400 x 1,200 dpi (optimized) 3 universal print heads, 2 colors each Rphcbqhioz two rollers: Single sheet feeder, two automatic roll feeders (automatic roll change), media tray, automatic horizontal cutter Roll size 279 to 1118 mm, max. roll diameter 135 mm Sheet size 210 x 279 to 1118 x 1676 mm Grammage 60 to 328 g/m² Memory 128 GB (virtual) Hard disk 500 GB with self-encryption

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Machine/vehicle number: SG82934001, Total length: 2,210 mm, Total height: 1,450 mm, Total width: 1,200 mm, Type of input current: three-phase, Overall weight: 750 kg, Input voltage: 380 V, Input current: 30 A, Ambient temperature (min.): 20 °C, Ambient temperature (max.): 30 °C, Power: 9 kW (12.24 HP), HP Jet Fusion 3D 4200 3D printer with PA12 material, little used, like new, year of commissioning 2021. Sold with process station and two building units: 1x Printer HP Jet Fusion 3D 4200 + 1x Processing station - HP Jet Fusion 3D Processing Station with Fast Cooling (4200 M0P49C) - including material supply barrel + 2x Build units - HP Jet Fusion 4200 3D Build Unit + 1x HP 3D Command Center - HP SmartStream 3D Command Center Nfk99Kmm Care Pack service support is paid until 20.7.2024 - HP 1 year Post Wty NBD Onsite HW Support Foundation Care for HP JF 5200/4200 3D Printer.

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, Installation date: 2018 Number of print jobs: 845 Service contract until: 31.01.2024 (3Daas) Number of builtunits: 2 R7Eyzr0K Collection and dismantling by the buyer.

Condition: used, HP-JetFusion 4200 3D printer, 1 printer + 1 build unit +1 processing station with polyamide PA12, little used, commissioned in 2019 only 452.000 powder layers printed Additionally sold: 1. safety vacuum cleaner, explosion-proof and HEPA filter (absolutely necessary for operation with the Processing Station) 2. room ventilation system with heat recovery, controllable up to 2000m³/h; with pipes and silencer 3. HAGE 3D printer 600x400mm, conversion to single extruder for material PA-CF and white permanent printing plate €2,000 (net price) S3Ksd 5. SINTRATEC tumbler €200 (net price) 6. BZT milling machine €3,000 (net price)

Year of construction: 2019, Condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Cxpuxyfjf7

Condition: ready for operation (used), HP Hewlett Packard 7010B X-Y Recorder, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Sxa7Uc

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1565 mm Ch7Tnuqhzk Measurements depth 955 mm Measurements height 1505 mm Control Unit Brand HP This HP MJF 580 3D Printer was manufactured in the year 2019 in Germany. It is equipped with a HP control unit. The machine has a printer resolution of 1200 dpi. Application Types 3DPrinting

Condition: like new (used), Year of construction: 2019, Operating hours: 931 h, Functionality: fully functional, Machine/vehicle number: SG79434002, (English below) For sale is a very good condition HP MJF 4200 machine. It was used exclusively to print PA12. We bought the machine from a large corporation in Germany, which hardly ever used it. During its use, an HP service contract was always active. This included all repairs/spare parts. For us, the machine was intended as a second machine but was then hardly used because we can produce more cheaply with our other machine. Ccainbw The printer + processing station + 2x build unit are being sold. It can be used for daily printing. Collection must be organized by yourself or by HP. All modules are on castors and can therefore be handled reasonably well. All devices can be inspected in Vienna. 3D-Printer + Processing Station + 2x Build Unit. Almost new HP MJF4200 printer for sale. We used it as backup-machine and therefore almost never used it. We bought it from a DAX company which used it for their R&D department. During uptime there was always a HP-Service-Contract, which means that all damaged parts/errors are renewed. Shipping has to be organized by the buyer and the machine can be picked up in Vienna/Austria.

Condition: good (used), HP DesignJet Z6200 CQ109A Technical specifications: Printing method HP color inkjet thermal printing Printheads 2 colors per printhead, 2 printheads per color Ink system HP Vivera ink system (photo black, matte black, gray, chromatic red, cyan light, magenta, magenta light, yellow) Print speed Pages per minute (Depending on print media and print mode) CAD: 17 s/page on A1 Graphics: Fast mode:up to 113,6m²/h on white paper (mechanical print time) Presentation: 3.2s/page on A1, 13.1m²/h on glossy media Maximum resolution 2.400 x 1.200 dpi otimized Memory 160 GB hard disk Printer languages Standard: HP-GL2/RTL, CALS/G4 Optional: Adobe® PDF, Adobe PostSript3®, TIFF, JPEG Media sizes Rolls from 610 to 1,066 mm wide Maximum roll media length 175 m Media types Paper (plain, coated and heavy coated, photo paper - matte, satin, glossy), technical papers, film (transparent, matte), vinyl (polypropylene, vinyl film, self-adhesive film), backlit, banner, fine art media (canvas, watercolor) flag stock Maximum print length 175m (depending on operating system and application software) Media handling Reel feed with automatic cutter and media take-up device Maximum media width 1067 mm Media thickness up to 0.56 mm Media weight up to 460 g/m² depending on media Maximum roll diameter 170 mm Power supply Input voltage 220 to 240 V AC (+/-10%), 50/60 HZ (+/-3 Hz), max. 2 A Built-in universal power supply Cdlp3Fkbeu Power consumption 420W max, 270W in operation,

Condition: used, Functionality: fully functional, Total length: 1,880 mm, Total height: 1,480 mm, Total width: 750 mm, Overall weight: 340 kg, Input voltage: 230 V, Used zPrinter (ProJet 650) for sale. Little used. E2Pnoty Has been idle for approx. 6 months. Was last fully functional, but probably needs to be cleaned properly and printheads need to be replaced. (Cyan print head reports error: too hot). Several kilos of original powder, binder (all colors), spare parts are included. Collection only in Munich-Feldmoching.

Condition: used, Functionality: unexamined, Machine/vehicle number: 66010093, Color 3D printer practically filled with powder. Print cartridges also included. Dptoqf Selling cheaply due to space requirements (room). Certainly not used for 4 months, therefore "untested". Additional kit from my3Dfamily for inexpensive binder -> rebuildable Incl. some consumables if desired -> Negotiable

Condition: excellent (used), Year of construction: 2018, Operating hours: 500 h, Functionality: fully functional, The ProJet 860 is the largest in its series of powder 3D printers from the American manufacturer 3D Systems. The max size of the printed object can go up to 50 cm (dimensions: 23 hight, 38 width, 50 length). The machine uses white powder mix and produces objects in gypsum in full colours. Very suitable for figurines and architectural models, among other items. Dpqwqh

Condition: used, Large format printers, plotters, color inkjet printers Liawh -Print width: max. 61 cm -Dimensions: 1250/450/H330 mm -Weight: 40kg

Condition: good (used), Functionality: unexamined, ProJet 660 3d printer!!!!! E2Oqwzm

Condition: like new (used), Very cheap for sale Incl. two software licenses (Online activation) Incl. 2 build platforms Machine hours: 19831 Hrs Pwn7Wq Build Hours: 911 Hrs Lamp Hours: 207 Hrs

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. Bzxs2Pqg9M The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: good (used), Commissioning date: 01/2017 Cad2Njde incl. software (online activitation) incl. building platform offer on request immediately available

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2350 mm D7V0Fok Measurements depth 2600 mm Measurements height 2300 mm Machine weight 2500 kg This 3D printer was manufactured in 2010 by VOXELJET. The VX800 model is known for its reliable performance and precision in creating complex parts and prototypes. This machine offers advanced printing capabilities suitable for a variety of applications. The VOXELJET VX800 3D printer we have for sale represents a solid addition to any production line seeking to enhance its 3D printing processes. For more details or to inquire about this printer, please contact us. Application Types 3D Printing

Condition: as good as new (ex-display), Year of construction: 2022, Operating hours: 300 h, Functionality: fully functional, Total length: 800 mm, Total height: 1,900 mm, Total width: 1,050 mm, Overall weight: 230 kg, Input voltage: 240 V, Compressed air connection: 6 bar, Feed length X-axis: 420 mm, Feed length Y-axis: 420 mm, Feed length Z-axis: 420 mm, Equipment: Compressor, VSHAPER 500 PRO (preliminary system) This is a VSHAPER 500 PRO with approx. 300 operating hours and various accessories. The 3D printer has an installation space of 420x420x420mm and an installation space heating up to 80°C. With the VSHAPER 500 PRO, materials up to 450°C can be processed with the open system. D7Uen0G The printer was only used for demonstrations and is like new. You can find more details in the brochure.

Condition: like new (used), Year of construction: 2014, Operating hours: 100 h, Used ProJet SD6000 3D printing machine using stereolithographic technology. The machine has had extremely low hours usage during its life so far, having been installed and minimally utilised from time to time for research projects at the University of Sheffield AMRC research department known as the “Factory of the Future”. Serial # 10311178101 Year 2014 MACHINE CONSTRUCTION & FEATURES The ProJet 6000 HD SLA 3D provides SLA quality in a compact footprint and is a printer which puts the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivalled material availability, into a smaller footprint. 3D Printed SLA parts with unrivalled accuracy and surface finish. High Flexibility 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. • Two build platforms • One material delivery cart • Projet TM6000 Print tray • Washing Unit 0Ndmm2Wsi • Curing Unit • 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties. Easily swap between material modules for flexible use. Print modes: High Definition, Ultra High Definition Resolution: (HD) 0.125mm, 0.125mm layer. (Ultra-high definition): 0.125mm, 0.10mm layer Net construction volume: (short) 250 mm x 250 mm x 50 mm (medium) 250 mm x 250 mm x 125 mm, (tall) 250 mm x 250 mm x 250 mm Accuracy: 0.025 – 0.05 mm per 25.4 mm of part dimension. BENEFITS: Stereolithography technology (SLA) Max build envelope capacity (W x D x H): 250 x 250 x 250 mm (10 x 10 x 10 in) Highest precision and accuracy Exchangeable Material Delivery Modules (MDMs). Utilizing two laser spot sizes per layer – no compromise between speed or feature detail True line drawing in X and Y to accurately define curves. Industry-leading 3D Sprint software for file preparation and production Cloud connectivity for predictive and prompt service with 3D Connect.

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. B7Hmpjt8 Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls