Hydraulic Press

Hidrobrasil Vulkanisierpresse

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Bdsdpfx Asfxyh Rjd Aeb Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. Bodjk S Dt Tepfx Ad Aedb - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm Bsdpfxsfxygps Ad Ajdb table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s Bdsdotwv S Nspfx Ad Aob - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: new, machine/vehicle number: DF0238 - Rev.00, pressing force: 20 t, pressure:20 t passage width:400 mm stroke:300 mm Weight of machine approx.:3 t dimensions:2200 x 650 x 2540 mm power capacity:ca. 4,5 kW table plate:400 x 400 mm pestle plate:400 x 400 mm daylight:300 mm Bdjdpfjfxyhbex Ad Ajb table height over floor:950 mm :2 - 20 t :S7 1500