Fiber optic converter board

HOMAG

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Gjdpfxjzap H Sj Ahvjuc Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function Gsdpfx Ajy A I Sgohvjuc GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Gusdoyvh Dpepfx Ahvec

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, total height: 1,895 mm, total width: 1,980 mm, overall weight: 1,580 kg, spindle motor power: 5,000 W, product length (max.): 2,950 mm, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details. • Workpiece capacity: • Length: 200–3,050 mm • Width: 70–850 mm • Thickness: 12–60 mm Guedpfxezc R Hfe Ahvjc • Milling spindle: 1 unit • Max. spindle speed: 18,000–24,000 rpm (depending on configuration) • Tool holder: HSK-F63 or ETP25 • Tool changer: 4-position magazine • Drilling spindles: • Vertical: 13 • Horizontal (X): 4 • Horizontal (Y): 2 • Grooving saw: X-direction • Control system: Homag powerTouch / Power Control PC 86 • Software: WOODWOP 7.x • Total connected load: 11.5 kW • Compressed air requirement: 7 bar • CE marking: Yes

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) Godszc Rzpopfx Ahvouc with  Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025)

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Gsdpjy In A Aefx Ahvouc Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Gjdpfx Ahsy Nx Ufjvouc Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: used, machine/vehicle number: 008608, X axis working area: 2500 mm Y axis working area: 1300 mm Gujdpfxozcmn Ss Ahvjc Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 84

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Gusdpfoyv Axnjx Ahvsc Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Gjdpox Swgfofx Ahvjuc Operating Units: 8 nr