Hosokawa Bepex Bextruder BX-200 - Mixing extruder

Hosokawa Bepex Bextruder BX-200 - Mixing extruder

Year of construction: 2013, Condition: as good as new (ex-display), Functionality: fully functional, Machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Cclzbombd8 Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: used, SKU : 250U362 Location : Barneveld Make : Bepex Type : L200/50p No. : 10427 Year of construction : 1987 Boxsrdwiwv Main Features Motor : 3 KW Inlet diameter : 310 mm Width : 50 mm Specified Features - Roll compactor Material : Stainless steel 1.4301 (304) Roll compactor : check Roll width : 50 Roll diameter : 200 Rolls can be heated/cooled : check Motor : 3,0kW,220/380 Volt, 1420 rpm With variable speed drive : check Roll speed : 18-90 Rolls can be adjusted : check With dosing/compacting screws : check Stöber, type: R65-3115-300-4, Dia: 50mm, pitch: 40mm With motor : 0,75kW, 220/380Volt, 2780/3335 rpm With variable speed drive : checkStöber, type: R25-2038-K2-075-2 Speed : 3,1-15,5 With hopper : check Hopper sizes : Dia: 310x280mm Inlet : Dia: 310mm Mounted on frame : check With switch : check With switchgear : check Weight : 750 kg Floorspace : 1,6x0,9m Total height : 1,3m What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Year of construction: 2003, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Cdtpkuvmbz Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Turboplex ATP 200 air classifier for the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process many different products for all kind of industries, like minerals, chemicals, etc. Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Without wear protection Non pressure shock resistant (NPSR) Scope: Hosokawa Alpine bare Turboplex ATP 200 air classifier with one single classifier wheel and 5,5kW motor

Year of construction: 2023, Condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Bb0Ks9Q32O Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2022, Condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. Cctllemomo The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Year of construction: 1990, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially suitable for the ultrafine grinding of different products with a sharp top cut. This pulveriser allows the fine comminution of products in the bottom chamber of the machine. Thanks to the different nozzles, the pressurized air reduces the product size to the desired one. The top part is fitted with an air classifier wheel that ensure the required top cut of the end product. This results on a narrow particle size distribution (PSD). Different settings allow to adjust the fine product on the go. This micronizer is suitable to process many different products for all kind of industries, like pharma and food products, soft minerals, chemicals, etc. Yxvvqonn Material of construction: stainless steel, mainly AISI 316 Without wear protection Non pressure shock resistant (NPSR), non ATEX Scope: Hosokawa Alpine 200 AFG-R jet mill with 3kW motor, cyclone, filter, blower, rotary valves and butterfly valves

Year of construction: 2015, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task. Additionally the gap between the rotor and the sieve can be adjusted. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Bnzydhp23B Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates Motor: 4kW

Condition: used, SKU : 074B395 Location : Barneveld Make : Hosokawa Micron B.V. Type : ISEM-200, Flange dia. 340mm . : 60153 Main Features Material : Stainless steel B2Ggltrjqb Inlet diameter : 200 mm Specified Features - Miscellaneous transport Material : Stainless steel 1.4571 (316Ti) Year of construction : 1994 Floorspace : 0,63x0,75 m Total height : 0,47 m Weight : 150 kg Extra Specifications : Ball segment valve What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Year of construction: 2011, Condition: ready for operation (used), A nauta mixer Hasokawa with all the necessary peripheral equipment is available. 1) Nauta mixer Hasokawa Micron WO. 2) Coperion ZXD rotary valve, built in 2011, max. permissible temperature 60°C. 3) Rotary valve 745K. 4) Exhaust fan. 5) Ullman suction unit, built in 2011, suction area 3m². 6) Screw conveyor. 7) Paxon roller conveyor with integrated Mettler-Toledo scales. 8) Filling device with Ullmann bag chute, built in 2011. 9) Control cabinets for load distribution and suction control. Dpfuln

Year of construction: 2000, Condition: defective spare-parts repository (used), This extruder from Changzhou Shuangli Transmission Machines Co, Ltd is in machine storage at Plastima Used Machinery. The machine is in fine condition. Bohy0T32Chf Brand: Changzhou Shuangli Transmission machines Co, Ltd Model: 200 Motor power: 37 kW Screw Ø: 50mm Single Screw

Condition: used, SKU : 402S949 Location : Barneveld Make : Buss Type : LR 100-19D . : 438004-2 Main Features Motor : 45 KW Inlet diameter : 100 mm L/D : 21 Specified Features - Mixing extruder Single screw mixing extruder : check Screw dia. : 100 mm Bwn3Eiku L/D : 2100/100 With jacket : check Screw speed : 300 rpm Inlet : dia. 100 mm (5x) Screw can be heated : check Max. temperature : 180 °C Material : Stainless steel Year of construction : 1993 Mounted on frame : check Total height : 1,5 m Floorspace : 3,3x1,5 m Weight : 2200 kg Extra Specifications : Easy to clean. Material: 1.4308 and 1.4122 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, New: Yes Field of application: Construction Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET Usgmavyvhr 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: excellent (used), Spindle bore: 104 mm, Turning diameter: 800 mm, Turning diameter over bed slide: 540 mm, Turning length: 2,000 mm, Universal lathe machine ZMM C13 MB x 2000 in excellent technical condition, after general overhaul in 2013, since then very rare used. Technical parameters: Turning diameter over bed: 800 mm Turning diameter over support: 540 mm Turning length: 2000 mm Ucxo3F2Ovp Spindle hole: 104 mm Spindle speeds: 8 - 1000 U/min Power supply: 13 kW Machine weight ca.: 6 t Space required ca.: 5 x 1,5 x 1,5 m

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, Overall weight: 890 kg, Load capacity: 200 kg, Arm reach: 2,597 mm, Kawasaki BX200LFE02 industrial robot. 6-Axis-Robot, Spot Welding / Handling, E02-Controller Payload: 200kg, Reach: 2597mm Dpswrt

Condition: new, Year of construction: 2024, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Izoquwq Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: used, SKU : 318S553 Location : Barneveld Make : Hosokawa Nauta No. : 86132 Year of construction : 1987 Pressure Working pressure : 0.01 Bar Working pressure jacket : 0.4 Bar Main Features Material : Stainless steel Volume : 4850 Ltr. Motor : 15 KW Specified Features - Conical mixer Material : Stainless steel 1.4541 (321) Conical mixer : check Capacity : 4850 Ltr. Largest cone diameter : 2000 mm Cone height : 2800 mm Manhole : dia. 500 mm Cfk7Kwylkl Top drive : check Motor : 15 kW 380-415/660/720 Volt Bottom bearing pintle bearing : check With jacket : 392 Ltr. Max. temperature : 20 °C Outlet with sliding valve : dia. 250 mm (valve) Mounted in frame : check Mounted on legs : check Floor space : 2,5x2,5 m Total height : 5,4 m Weight : 4000 kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Year of construction: 2023, Operating hours: 100 h, Condition: good (used), Functionality: fully functional, This kneader is widely used in chemical, petroleum, plastic, food, medicine and other industries. It is used to knead CMC, silicone rubber, sealant, modified starch, dye, pigment, carbon, rubber base, ink, tape, food, starch and other materials with various viscosity. It is an ideal equipment for experiment and batch production. Udryzpolp9 Designed and manufactured according to JB/T6489-1999 Plastic Kneader of the mechanical industry of the People's Republic of China and MD 2006/42/EC Kneader and similar foreign equipment.

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Dpqnfz Volume 9980l Weight 2200kg

Year of construction: 2022, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Nxp8T Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: used, Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Mc3Knee0 Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Condition: used, SKU : R0400 Location : Barneveld Make : Hosokawa Nauta Type : DBXE-1800 R/S No. : 20142 Year of construction : 1981 Main Features Material : Stainless steel Volume : 1800 Ltr. Motor : 11 KW Specified Features - Conical mixer Material : Stainless steel 1.4301 (304) Conical mixer : check B9Fwg8Skvy Capacity : 1800ltr Largest cone diameter : 2200mm Cone height : 3060mm Top drive : check Motor : 11 kW, 380 Volt Motor : 0,75 kW, 380 Volt Cantilevered screw : check Bottom discharge : Ball valve Total height : 4,8 M Weight : 2600 Kg Floor space : 2,3x2,3 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Year of construction: 1999, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Fflenrk Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope: Hosokawa Alpine Pharmapaktor APC L 200/50, including feeding, without Flake Crusher.

Year of construction: 1999, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Ckeugl97Pk Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pharma industry. Material of construction: - product contacting parts: stainless steel - none product contacting parts: stainless steel Non Pressure Shock Resistant (NPSR), non ATEX Scope: Hosokawa Alpine Pharmapaktor APC K200/50 with 4,0 kW motor, feeding screw with 1,1 kW motor + Flake Crusher AFC 300 with 0,75 kW motor

Year of construction: 1988, Condition: like new (used), This Extruder from Berstorff is in machine storage at Plastima Used Machinery. The doser is from 1988 and is in fine condition. – Brand: Berstorff – Construction year: 1998 – Screw Ø: 200mm 9Llm2Alsgt – Engine: 337 kW – Single-degassing incl vacuum pump accessories

Year of construction: 2025, Condition: new, Machine/vehicle number: 982988248, Frumecar Modulmix 2000 concrete batching plant year: New capacity: 90 m³/h - 4-5 aggregate hopper / in line - capacity hoppers: 60 - 120 m³ - mixer size: 2,0 m³ / 3000 liter - K2 full automatic computer system - electric control system: Siemens S7 - diameter cement screw: 273 mm - cement silo: 1-4 - international assembly included Pvasr - 2 years guarantee from startup - winter housing possible This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Use: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,