Shaving Cutter Grinding Machine

HURTH SRS 400

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Dpfktr Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: good (used), max. grinding diameter 400 mm Dmaqcp max shaving cutter diameter 320 mm max shaving cutter modul 12 max shaving cutter width 40 mm number of teeth 13-240 total power requirement 3 kW weight of the machine ca. 4,2 t

Condition: good (used), Bruker Type: SRS 3400 7KP1025-1 Sequence X-ray spectrometer SRS 3400 Manufacturer : BRUKER AXS Program : SPECTRA plus V1.30 Space requirements Dimensions : 186x88x126 Weight ( basic unit ) : approx. 750 kg Optimum room temperature : 240C Max. Temperature fluctuation : ± 70C Max. Temperature gradient : 20C/h Relative humidity : + 20 do 80% , no condensation The heat released into the room air must be dissipated with a ventilation or air conditioning system. Ffum32Dz Media requirements Connection to the electrical network: Alternating, three-phase current Cooling water supply: Flow rate : min 3.6 l/min Water pressure : 4 to 8 bar Water temperature : 10 to 200C Integral consumption : approx. 1.8 l/ min at 3kW radiator power Legal requirements Depending on the location Technical data X-ray emitter : Type AG66 Anode material : Rhodium ( Rh ) Anode voltage : max 60 kV Emitter current : max 100 mA Power : max 4 kW Beryllium window thickness : 125 pm Filter changer : Number of positions : 10 Mounting : 0,1 mm Al. ; 0,2 mm Al. ; 0,5 mm Al. ; 0,8 mm Al. ; 0.2 mm Cu ; 0.3 mm Cu ; Original radiation aperture pierwotnego ; and three free positions. Colimators : Number of positions : 4 Available aperture angles: 0.0770 ; 0.150 ; 0.460 ; 0.900 ; 1.20 ; 1.50 Crystal changer : Number of positions : 8 Crystals: LiF(420) ; LiF(220) ; LiF(200) ; Germanium ; PET ; AdP ; TIAP ; OVO-55 ; OVO-B ; OVO-B/C ; OVO-C Scintillation knife : Type NaJ(TI) , Ø32 mm , 1 mm thick Beryllium window thickness 0.2 mm Vacuum system : Suction capacity 10 m3/h ; two vacuum pumps type RV12 EDWARDS Helium device : consumption 30 l/h Counter tube gas supply : Gas mixture P10 ( 90% argon i 10% methane ) Gas pressure : 0,5 bar ± 0,5 mbar Gas consumption : ok. 2,0 l / h Stabilization of the temperature in the spectrometer : to ± 0.010C Sample requirements : Diameter : max 34 mm Sample height : max 47 mm Sample changer : Number of samples -8 pcs. Scope of delivery: Bruker AXS, PC, monitor, pumps, small parts adapter set, software, documents Condition: gebraucht / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2003, Max Gear Diameter: 150mm Max Module: 4 Table Diameter/Bore: 170/100mm Radial Travel: 155mm Axial Travel: 400mm Tangential Travel: 240mm Dppllj Tailstock: With integrated ring loader and deburring station CNC Control: Siemens Sinumerik 840D Hob Head: 1800/3000rpm, 22kW, swivel +/- 45 degrees, hob diameter x length 130 x 325mm Table Speed: 600mm Weight: Approx. 11 tons

Condition: excellent (used), Coater SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4 knife shaft with traditional knives Planer shaft speed 5000r.p.m Main motor 4kw Suction nozzle fi120 Bei0Obq Dimensions of the machine 800 x 1000 x 1080mmH Weight 410kg

Condition: excellent (used), Year of construction: 2017, Formax MC-400 Cube Perforator Bmefdlhw7Ok

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear shaping machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the shaping of straight-toothed bevel gears with a short run-out. We have 2 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear cutting machine, can also produce bevel gear sets with crowned teeth in high quality. Technical data Workpiece diameter: 315 mm Module max.: 10 mm Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7.000 kg Upax09Azej *Specifications and data are non-binding, subject to prior sale Inspection under operating conditions possible by arrangement.

Year of construction: 2000, Condition: excellent (used), Face plate diameter 400 mmConus 105 mmhole circle 135Age estimated Bfxx7Kjsa3

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Dppur9

Condition: good (used), Year of construction: 2003, Max Gear Diameter: 160mm Max Module: 4,5 Table Diameter/Bore: 170/100mm Radial Travel: 155mm Axial Travel: 600mm Crpifui7Lg Tangential Travel: 240mm Tailstock: With integrated ring loader and deburring station CNC Control: Siemens Sinumerik 840D Hob Head: 1800/3000rpm, 22kW, swivel +/- 45 degrees, hob diameter x length 130 x 325mm Table Speed: 600mm Weight: Approx. 11 tons

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc Ufpuzhcdil T1SP 300x145x160 M 2,5 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: good (used), Faceplate Diameter 400 mm 3Rncf87Ip KKG 6 Height 100 mm Bayonet lock

Condition: good (used), Year of construction: 2003, Min/Max Gear Diameter: 40 - 320mm Min/Max Module: 1.25 - 3.5 Max Face Width (Total/Shaving/Deburring): 90/40/30mm Min/Max Tool Diameter: 200/205mm Swiveling of Shaving Cutter Head: -90/+23 degrees Max Conicity (B-axis): +2/-2 degrees X/Z Travel: 170/300mm Dppmej Stroke of Deburring Tool: 50mm CNC Control: Siemens Sinumerik 840D Voltage: 400V, 50Hz, 22kVA, 32A Weight: Approx. 5.6 tons

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Ufpt2Nmqyb Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Year of construction: 1997, Condition: excellent (used), Face plate diameter 400 mmHeight 100 mm Bfxx7T0Xu7

Condition: good (used), Year of construction: 1996, Max Gear Diameter: 320mm Max Face Width: 140mm Dppmfr Min/Max Module: 1.25 - 8 CNC Control: Siemens Sinumerik 840C Weight: Approx. 7 tons

Condition: like new (used), Year of construction: 2010, max. wheel diameter 210 mm gear width 350 mm max. module 4 min. module 0,3 Control Siemens 840 D Powerline turning speeds 300 - 4000 U/min maximum axial offset 300 mm tailstock adjustment 350 mm swival range +/- 40 ° total power requirement 46 kW Beiw2P3 weight of the machine ca. 9,5 t dimensions of the machine ca. 6,2 x 2,9 x 3,5 m Genesis 210HiC - Vertical Hobbing Machines with Optional Chamfer Rolling. The Genesis Hobbing Machines with vertical workpiece axis offer highly productive gear hobbing with optional chamfering and deburring capability. Workpiece diameter, max. 210 mm. Module, max. 3/4* mm. Workstation consisting of: -- Gleason milling machine "Genesisi 210 HIC" -- Borries embosser 315 WP-C -- Promot-Automation "loading and unloading unit"

Condition: good (used), Surface plate Dimensions 300 x 400 mm weight 32 kg Ckrrrexe in wooden case

Condition: good (used), Year of construction: 2003, Max. Diameter: 150mm Module range: 0.5 - 4 Crprpvawok CNC control: Siemens Sinumerik / UniPo 840 Dimensions (L x W x H): Approx. 3 x 2.5 x 2.5m Weight: Approx. 6 tons

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW Cccmnz8 weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: good (used), Faceplate diameter 400 mm 2X807Bham Curls district 133 mm KKG 6 1 bolt circle diameter with 4 holes 14 mm wide

Condition: good (used), Year of construction: 1999, Machine/vehicle number: 180201, - Max. Tooth diameter: 100mm - Max. Module: 3 - Min/max travel: Radial: 10-100mm Axial: 100-300mm Tangential: 200mm - Table diameter/bore: 132/110mm / 80mm - Distance hob cutter-table center: 0-90mm - Min./Max. center height of the outer steady rest: 165-365mm - Minimum distance between hob cutter center and table: 100mm Ul2Tp3Xxwl - Hobbing head: Speed: 250-3500 rpm Tilt: +/- 40° Hob cutter diameter x length: 80 x 240mm Tool holder: HSK-A 63 Power: 15kW - With deburring unit - CNC control: Siemens Sinumerik 840C for 5 axes - Chip conveyor - Coolant unit - Power supply: 400V, 50Hz - Dimensions (L x W x H): Approx. 2.3 x 2.3 x 2.2m - Weight: Approx. 7 tons

Condition: good (used), Faceplate Diameter 400 mm Max 960U RPM 7Av2Bl2Yr rotating JAWS Cone diameter 106,39 mm PCD 133.4 mm

Condition: good (used), Year of construction: 2014, Machine/vehicle number: A0010, - Max. Tooth diameter: 150mm - Min./Max. module: 1.25 - 3.5 - Max. Gear width: 45mm - Automatic workpiece handling with conveyor system - CNC control: Siemens Sinumerik 840D - Chip conveyor Gpdnog - Dimensions (L x W x H): Approx. 2.5 x 2.1 x 2.35m - Weight: Approx. 7 tons

Year of construction: 2019, Condition: as good as new (ex-display), Rolling burr tool Make Gleason - Hurth Type:CH7M5R - 7B340-B1A Bhz3Xt8Fpy 200 mm diameter unused is delivered in a wooden box Weight 9,5 kg