Plasma-nitriding furnace

IPSEN VVPH

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling Pjdpsxaa A Nefx Ag Djpr - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Ppjdpfjwmfyvjx Ag Der Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: used, functionality: fully functional, KUKA & ABB Axes – Various Lengths & Load Capacities Available! We offer a wide selection of linear and auxiliary axes from the brands KUKA and ABB – ideal for expanding existing robotic systems or implementing new automation projects. Available Models • KUKA axes for KRC2 and KRC4 • ABB axes for IRC5 Variants • Various lengths • Different load capacity classes • Optional with or without motor/gearbox Psdpfxexxki Do Ag Dopr Condition & Quality • Industrial standard, tested & fully functional • Immediately available (depending on model) Ideal for: • Automation • Material handling • Welding • Pick & place • Special solutions — Enquire now! Simply send us your required length, load capacity, or controller specification – we will prepare a tailored offer for you.

Year of construction: 2002, condition: excellent (used), 10-2 bar, year of manufacture 2002 Ppsdpsykyqijfx Ag Djr

Year of construction: 1990, condition: used, The machine underwent a complete overhaul by the original manufacturer in 2016. Since then, it has seen very limited use and has been stored and disconnected for several years now. Ppsdpfx Agsyaczpe Der

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Podpfsw Ec Egsx Ag Dopr Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Ppodoxz Divopfx Ag Djr

Condition: excellent (used), wire diameter - max. 5 mm Ppsdpfx Aoyr Si Hog Djr total power requirement 7,5 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Ppjdpfeyr Affox Ag Der

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control Ppodpfx Agoif Sbie Djr