Iwesa O-PC-SE-P pressing device for ceramic pins in rotor shaftsIwesa
O-PC-SE-P
Price & Location
- Location:
- Dunkerstrasse 29, 46325 Borken/Burlo, Deutschland
Details about the offer
- Listing ID:
- A739-9415
- Reference number:
- 25105
- Update:
- 21.10.2026
Description
Operating principle:
The ceramic pins are fed to a testing station via a vibrating feeder and a pneumatic hose, where the position of any existing one-sided bore is checked. This is done using an optical sensor.
Incorrectly positioned parts are conveyed to a collection container by a pneumatic slide.
Correctly positioned pins are fed to the singulator of the press-fitting tool via another pneumatic hose.
The actual press-fitting process is also carried out pneumatically with a roller bearing-guided plunger.
First, a manually adjustable pressure p1 is used to ensure that the pin is not pressed too easily into the shaft.
Then, with another manually adjustable pressure p2, the pin is pressed fully into the rotor shaft.
A disk spring pack preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft.
The rotor shaft must be manually inserted, removed, and clamped into the tool by an operator. This process is secured by a light curtain.
Design
Self-supporting station, integrated into a complete system, for press-fitting ceramic pins and balls.
Rotor shafts
Nodsib H U Depfx Angslh
Diameter: 5 - 20 mm
Length: 50 - 200 mm
Ceramic pin
Diameter: 3 mm
Length: 5 +/- 0.2 mm
Operating cycle
Performance: 15 cycles per minute
Safety
Protective door with safety switch
Light curtain, category 4
Emergency stop
Airborne noise emission
Continuous sound pressure level at the workplace: 70 dB (A)
Electrical connection
Voltage: 230 V AC
Frequency: 50 Hz
Fuse: 10 A
Compressed air connection
Operating pressure: 5 - 7 bar
Dimensions
L x W x H = 850 x 950 x 1020 mm
Weight: approx. 110 kg
Year of manufacture: 2003
Electrically adjustable work table
Documentation and circuit diagrams are available.
More press-fitting devices – new and used – can be found in our shop!
International shipping costs available on request!
The listing was translated automatically. Translation errors are possible.
Seller
Last online: A week ago
Registered since: 2008
534 listings online
Send inquiry
Telephone & Fax
Used-Machines Trust Seal
What is the trust seal?
Used-Machines certifies selected sellers with the Used-Machines trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Used-Machines staff.
What do we verify?
Check of
trade licence or commercial register extract
Verification of the dealer's
postal address
Validation of the
banking details
Verification of
accessibility to
main phone number
Credit report
may not contain negative criteria
Buyer complaints
can lead to withdrawal of the sealWhat does this mean for you as buyer?
The Used-Machines trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Used-Machines is not liable for any legal violations by buyers or sellers active on Used-Machines.