Veneer press

Joos BEU 80

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Hjdpfx Agou Egp Iedjni Machine height: 1750 mm Weight: 950 kg

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Hnsdpfoxdc Uvsx Agdoi

Condition: used, Year of construction: 2002, functionality: fully functional, Cutting size 3,200 x 3,200 mm Maximum cutting height 50 mm Hnsdpfx Asyba Shegdsi Main saw motor 5.5 kW Main saw blade diameter 300 mm Scoring saw motor 1.1 kW Scoring saw blade diameter 150 mm Saw carriage feed adjustable 6 - 32 m/min Program fence feed 18 m/min Number of clamping grippers: 6 pcs. Number of air cushion tables: 3 pcs. Manual angle return device for cuts 100 - 1,250 mm wide PC control based on Windows 2000

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz Hnjdpfx Agow Nablodei · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim Hsdpfx Agew Nabrjdoni

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case Hnedpfxow D T Dks Agdji T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 800 mm Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Hsdoww Ravepfx Agdeni Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Hnedsvu A Hdjpfx Agdei Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt Hjdpfew I H Rqjx Agdeni - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 105 mm, cutting width (max.): 1,300 mm, saw blade diameter: 350 mm, rotational speed (max.): 4,000 rpm, total length: 4,300 mm, overall weight: 1,300 kg, cutting length (max.): 3,200 mm, pivoting range: 45 °, The Concept 350 combines the advantages of various saw systems: As flexible as a panel saw, the cutting quality of a pressure beam saw, and as ergonomic as a trimming saw. This is the sawing concept for modern industrial production. Hnodpfx Agewzuipjdei The machine is a leasing return. Further technical data: - Motorized rip fence with 4 aluminum stops, which move synchronously - Screen control with 8" touchscreen - Air requirement: 6 bar - Sliding table: 1,000 x 400 mm (extension table) - Outrigger table size: 3,200 mm with 2 digital stop jaws - Extraction connection: 1 x 100 mm, 1 x 120 mm - Feed speed: 0 - 40 m/min Special features: - Programmable saw blade height adjustment - Mitre fence +/- 50° - Cutting line laser - Additional support table 800 x 200 mm With the new Concept 350, you no longer need a panel saw! The workpiece rests on the machine and is positioned precisely with a pressure beam. The saw unit can be swiveled from 90° to 45°, is guided with precision, and cuts your workpiece at a constant feed speed of 0–40 m/min, ensuring the best possible cutting results. The standard crosscut fence enables quick cutting to length and efficient operation, with significantly less space required compared to any sliding table saw! Advantages over a sliding table panel saw: - Significantly less space required - The pressure beam secures the workpiece on the machine and guarantees optimal cutting results - The pressure beam prevents the operator from reaching into the saw blade - Ergonomic operation, as the operator no longer has to push the material through the saw blade - Time saving, as the operator does not need to guide the material during the sawing process Including delivery and installation within postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.