Wide-belt sander

Kündig Perfect -2 1350 REd-L sofort verfügbar -

Perfect-2 1350 RED-L
Wide belt sanding machine incl. sanding version for intermediate sanding of coatings

Special price for showroom machine - in-house trade fair machine -

- Robust, space-saving W-wide belt sanding machine for the highest demands.
- Constant working height thanks to adjustable upper part
- Working width: 1350 mm
- Top sanding, with 2 sanding units

- Grooved rubber contact roller in proven hardness
- Contact roller level can be adjusted continuously according to a sanding grit scale
- Electric raising/lowering of the contact roller according to the selected unit
- Electronically controlled segment sanding pad
- Entire sanding pad unit can be tilted 10 degrees
- Parallel, spring-loaded, ground steel pressure roller at the infeed
- Rubberized pressure roller between the sanding units and at the outfeed

- 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz
- Motor-driven, finely adjustable height adjustment with digital display
- Belt tension, control and oscillation are pneumatic
- Compressed air consumption approx. 2 l/min
- Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc.
- Workpiece feed 2.2 kW with conveyor belt and drive roller
- Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces
- Automatic thickness adjustment over the entire working width
- Over-thickness protection for workpieces with feed emergency stop and lifting mechanism
- Continuously adjustable chip removal rate
- Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min
- PLC control with teach-in memory
- Pneumatic belt control
- Workpiece support with roller at the infeed and outfeed
- Enormatic: Fully automated quick setting and feed release
- Eco energy-saving mode
- Fault diagnosis
- Pass height 210 mm up to 18.5 kW
- Sanding belt dimensions 1350 x 2000 mm

Perfect - Equipment:
High-quality, swiveling acrylic glass control panel
- 10-inch touch screen
Pjdpfxjk Dpp Se Anpegn
- Industry control
- Automatic pressure regulation and saving of sanding pad elements
- Electronic compensation of sanding belt grit size
- Operating and running hour counter

Coating equipment:
- Continuously adjustable sanding belt speed on the 2nd unit
- Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process
- Electronic sanding pad with a segment width of 22 mm
- Additional sanding pad insert

Additional options included in the machine:

Foldable outfeed table extension (without top)
C10) LED package
ASB5+AS3) ECS workpiece blowing system with fan

Location: 54634 Bitburg
- Available immediately -

The listing was translated automatically. Translation errors are possible.