High speed press

KAISER V 40 W / 680

Condition: used, Year of construction: 1987, Machine/vehicle number: 131 267, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton Iswg0Ne Extended machine accessories

Year of construction: 1986, Condition: used, pressure 40 t Tvdunx3Gs dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1986, Machine/vehicle number: 131 223, Press capacity: 32 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 270 mm Free frontal opening L-R: 685 mm Free lateral opening F-B: 250 mm Table surface area : 680 x 530 mm Slide area: 565 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 950 mm Upmlodcsq9 Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,5 ton

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m ram adjustment 50 mm Iswctb3 permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1990, Machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Upmkqjnaav Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: used, Year of construction: 1986, Machine/vehicle number: 131 223, Press capacity: 32 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 270 mm Free frontal opening L-R: 685 mm Free lateral opening F-B: 250 mm Table surface area : 680 x 530 mm Slide area: 565 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 950 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm I8Oqjdstw Weight of machine approx.: 5,5 ton

Condition: used, Year of construction: 1990, Machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Behsgieqhx Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Condition: used, Year of construction: 1980, Machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Upmml3Yfbj Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1985, Beam size: mm Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm Bls2Gnn8Hs0 ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t Automatic Punch Press without roll feed and band infeed

Condition: used, Year of construction: 1988, Machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min Y7Lrjhih8 sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control panel

Condition: used, Year of construction: 1985, Machine/vehicle number: 131 153, Press capacity: 40 ton Upmdb3Al8F Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories Zehnder & Sommer roll feeder - YOM 2003 The machine was completely mechanical and electrical overhauled in 2003

Condition: used, Year of construction: 1980, Machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Bdj2Do2He Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1985, Machine/vehicle number: 131 153, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Ihyxkusim Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories Zehnder & Sommer roll feeder - YOM 2003 The machine was completely mechanical and electrical overhauled in 2003

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Cccpyig Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device

Condition: used, Year of construction: 1974, Eccentric press, single-column press, punching machine, single-column eccentric press, eccentric press, single-column press -Manufacturer: Kaiser, punching machine with pliers feed type PO 40 F -Plier feed max. width: 175 mm -Pressure capacity: 55 tons -Stroke: adjustable 9 to 60 mm -Stroke number: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm - Throat: 220 mm -Punch holder: Ø 38 mm Cfsfvzoqf9 -Insert height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Condition: not inspected (used), - tool balancer - KAISER (Switzerland) UMS 1 / SK 40 Dlxyrf - No. 718.221 - for toolholders ISO 40 - with SYLVAC unit

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm Rd8Gn ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls will be offered with new control Siemens S 7-1500 F

Year of construction: 1988, Condition: ready for operation (used), Punching force: 630kN, stroke adjustment: 10-80mm, ram adjustment: 80mm, stroke speed: 65-400/min, connected load: 11kW, length: 1590mm, width: 1650mm, height: 3000mm, weight: 9.5t, with documentation. C0Muhqcsca

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Ni7Zx Standard configuration hydraulic tool clamping device

Condition: used, fan, ventilator, blower -Manufacturer: Prein fan, fan ventilator, radial fan -Type: RES 85/42 Ukipfg8Obj -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

Condition: used, Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 295/185/H140 mm 9Bih2Cugh -Weight: 7 kg

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, Forklift battery with 1-year warranty 80V 4PZS 500AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 Dimensions: 1025 x 708 x 627 mm Weight: approx. 1,215 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models and more: Linde E 16 P - 386-02 - lateral change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Behdlxy Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - lateral change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - lateral change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical changeover Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - lateral change Linde P 250 SWB - 5007-10 - vertical changeover Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical change Linde W 20 - 127-06 - change from above Linde W 20 - 5007-10 - lateral change Linde V 20 - 5007-10 - vertical changeover Linde W 30 - 5007-10 - lateral changeover Linde W 30 - 5007-10 - vertical change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 All common battery sizes available

Year of construction: 2024, Condition: new, Fuel type: electric, Forklift battery for Bulmor EQN 40 - 50 device Type 80 V 6 PzS 930 New incl. Aquamatik, 2 x end arrester Rema 320 G28A0Bjy8H Special trough

Condition: used, Fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump Ejhtuy7P -Manufacturer: Schwabmüller, hydraulic pump from pedestrian stacker Kaiser Kraft UNI-GV 10/25 UNI 10/25 -Motor: type UP 10.5/112.79.89 12 V 1.5 kW -Dimensions: 210/200/H465 mm -Weight: 13 kg

Condition: excellent (used), 612 USED shop oven WP Brilant for 5 trays 60x40. EXTERNAL DIMENSIONS (in cm): - W: 93 - L: 130 - H: 212. EQUIPMENT: - hood - fogging - base with shelves Huxdyxk TECHNICAL DATA: - power: 7.5 kW - steaming: 1.5 kW The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, UKRAINIAN.