Asphalt mixing plant

Kalottikone Hot Mix 30

Condition: used, functionality: unexamined, The belt dryer was not put into operation by me; it was purchased used. Ksdpfxsyf Uhlj Anwjdn It is being sold as used, without warranty or liability. The right switch cabinet door is damaged (hinges torn out).

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Kdodjx Tpzdspfx Anwjn

Condition: used, functionality: fully functional, Used asphalt mixing plant Ammann MEA 180 Mixing tower complete, Ammann mixer 4 t Drying drum Benninghoven, year of manufacture 2018 Kdsdpfx Anjywn Idswjn Burner Benninghoven, year of manufacture 2018 Filter unit Benninghoven, year of manufacture 2018, exhaustor 2018, chimney 10 dosing units with conveyor belt Control system in container Loading silo with skip hoist and winch Filler silos with screw conveyors and transfer elevator RC addition with drying drum and complete conveying technology without bitumen section

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) Kjdpfjxlif Rox Anwsdn - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. Kjdpfxex S Ibgs Anwsdn For additional information, please write on Whatsapp.

Condition: used, Year of construction: 2019, operating hours: 9,000 h, * Vögele Super 1900-3i asphalt paver Kdjdpfxoyq A I Ds Anwsn * Year of manufacture: 2019 * 9000 operating hours * 142 kW * 22150 kg * Screed: 26AB / AB600-3 TP2 compaction screed * Hydraulic paving width: 6 m * Automatic grade and slope control * Central lubrication * Extensions: 2 x 75 cm & 2 x 25 cm * Total working width: 8 m

Year of construction: 2015, condition: used, Manufacture : Volkmann Model : VS250 Eco Year : 2015 Classification: ATEX Ex (see photo) Type: MULTIJECTOR® Vacuum Transfer System / conveyor VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Electrotimer ET3S (Electropneumatic control unit) Cleaning filters with compressed air Ksdpey Sbugofx Anwsdn Materials: stainless steel

Condition: new, For sale: Bernard Controls DEUFRA SQ10 electric valve actuator The device is brand new, unused, from warehouse stock. Ideal for industrial applications, process installations, automation, and valve or damper control. Technical data: Manufacturer: Bernard Controls DEUFRA Model: SQ10 Power supply: 230 V Phase: 1-phase Power: 0.02 kW Frequency: 50 Hz Current: 0.5 A Torque: 100 Nm Speed: approx. 0.43 rpm Industrial-grade design Condition: New, unused, warehouse stock No signs of use Fully functional Additional information: Kjdpfeyu U Azsx Anwodn The price is for one unit

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • Industrial automation Kdedpey Skm Esfx Anwon • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.