Surface grinders KENT KGS-63WM1 2015

KENT

Condition: like new (used), Year of construction: 2019, Weight 6250 kg Size 5810 × 2545 × 2445 mm Design Table clamping area 1500 x 600 mm Max. table load 1300 kg Longitudinal table movement 1600 mm Table groove (number/width) 3/ 16 mm Table feed 7 – 25 m/mm Min./Max. Distance spindle nose-table max. 600 mm Handwheel pitch vertical 0.002 mm Handwheel revolution vertical 0.5 mm Automatic grinding feed 0.002 – 0.02 mm Vertical rapid traverse (Y-axis) 230 mm/min Cross travel 660 mm Cross feed per stroke 0.1 – 12 mm Cross rapid traverse 1250 mm/min Handwheel pitch transverse 0.02 mm Handwheel revolution transverse 5 mm Grinding spindle motor 7.5 kW Grinding spindle speed 1450 rpm Grinding wheel 355 x 50 x 127 mm Hydraulic motor 3.7 kW Kodevwdhhspfx Ah Aedp

Condition: used, Uncoiler S256 3Tn, made by KENT Coil weight : 3 Tn Coil width : 250 mm Thickness : 0.8 - 3.2 mm SCOPE OF SUPPLY - 3Tn Single expandable uncoiler Kjdsyma A Djpfx Ah Aodp - Strip retainer - Control panel Coil weight: 3 Tn Coil width: 250 mm Thickness: 0.8 - 3.2 mm

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. Kdodpfx Aex A D H Rjh Ajp cooling water/filter tray documentation machine is powered on for inspection

Year of construction: 2017, condition: as good as new (ex-display), Flow meter for water Manufacturer: ABB Kent Messtechnik Type: 656 WP 4800 Pn: 16 bar Qn: 25 m3/h Ap: 0.3 bar 30 degrees Kdeded Tg Szopfx Ah Ajp 30 degrees

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Kjdpfxsqwyzfo Ah Aodp Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: new, functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, total height: 2,400 mm, total length: 4,445 mm, total width: 2,100 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 550 mm, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 5,800 kg, grinding spindle speed: 1,450 rpm, Table surface area: 1000 x 500 mm Maximum table load: 1000 kg (including magnetic clamping plate) Grinding spindle motor: 5.5 kW Guide system: Flat guides Machine weight: approx. 5800 kg Operation/Control: Servo-controlled vertical feed in the grinding cycle Electric transverse movement with programmable reversing points via the control panel Electronic handwheel Mobile control panel with 7” color screen and touch function Programmable grinding cycles in 4 variants for the vertical axis Workpiece memory, 10 grinding cycles for quick access Includes the following standard accessories: Full enclosure, open at the top Separate hydraulic system Continuously adjustable table longitudinal movement with automatic table reversing Vertical rapid traverse for the grinding head: 300 mm/min (jog speed) Automatic, continuously adjustable vertical feed from 0.001 - 0.025 mm via servo motor Adjustable magnet including clamping force monitoring Automatic central lubrication with visual inspection 1 balancing device for grinding wheels, including balancing arbor 1 grinding wheel flange for grinding wheel bore 127 mm 1 grinding wheel 355 x 38.1 x 127 mm 1 table scraper Kodpfocm Axuex Ah Aedp 1 rear splash guard 1 set of leveling screws for alignment and machine feet 1 operating manual including electrical wiring diagram 1 acceptance test report for machine geometry and grinding spindle according to DIN 8632 Optional: Fine-pole electro-magnetic clamping plate 1000 x 500 mm Coolant tank (max. 135 L) with magnetic separator and paper band filter Manual scraper with hand lever

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, controller manufacturer: FANUC, controller model: 0IMD, table width: 4,200 mm, table length: 1,650 mm, table load: 9,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,500 rpm, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 32, Vertical machining center gantry type. KENT BKV20-42 Kodpfx Aeyu Svfsh Asdp Year of manufacture 2015 CNC FANUC 0iMD Table Table dimensions: 4200x1650 mm T-slot/pitch size: 22x9x170 mm Max weight allowed: 9000 kg Capacity Longitudinal X-travel: 4200 mm Cross Y-travel: 2000 mm Vertical Z-travel: 900 mm Spindle nose: BT50 ISO Spindle speed: 30-4500 rpm. Motor power: 18.5-22 Kw Rapids X,Y,Z axis: 10000/12000/12000 mm/min Tool magazine 32 Specific properties Distance between colums: 2000 mm Distance from spindle nose to table: 40-940 +200 mm Increased heigth: 200 mm Machine dimension: 10.443x4330x4518 mm Machine weigth: 42.500 kg

Year of construction: 2008, condition: ready for operation (used), overall weight: 8,500 kg, total height: 2,470 mm, This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table clamping area: 1500 x 600 mm / max. Table load (with magnet): 1300 kg longitudinal table travel: 1600 mm / table slots, number/width: 3/16 pcs/mm / table feed: 7-25 m/min Kjdpfjx D H Rhjx Ah Aedp • Vertical y distance from table to spindle center: 600 mm / vertical handwheel pitch: 0. 002 mm / feed per handwheel revolution: 0. 5 mm / automatic grinding feed ahd: 0. 005-0. 04 mm / automatic grinding feed wm1: 0. 002-0. 2 mm / vertical rapid traverse: 230 mm/min / transverse z travel: 660 mm / transverse feed per stroke: 0. 1-12 mm / transverse rapid traverse: 1250 mm/min / handwheel pitch: 0. 02 mm / feed per handwheel revolution: 5 mm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm • Grinding spindle motor: 7. 5 kw / grinding spindle speed: 1450 rpm Dimensions Machine Depth 6200 mm

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Ksdpjh Ha Ipsfx Ah Asdp Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K