Filter system

KNOLL VRF 450

Condition: good (used), Year of construction: 2004, We offer you: Filter system KNOLL VRF 450/2100 year of construction 2004 Condition: used Bnrwzpycuc Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: excellent (used), Year of construction: 2001, liter capacity 300 l feed pressure 18,5 bar coolant capacity 1800 l total power requirement 45 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 3,0 x 1,8 x 2,1 m Ukuvmmpzuh

Condition: ready for operation (used), Year of construction: 2013, An oil coolant system including an HSS recirculating cooling system is available. Total capacity: 5800 l, flow rate emulsion/oil: 1000/500 l/min, max. delivery pressure: 150 bar. Pumped liquid temperature: 80 °C, flow rate suction line/pressure line: 1m/s / 3m/s. Dimensions: Length 3200 mm, width 2120 mm, height 2735 mm. Accessories: Water cooler HSS type: DKB1000. Regularly serviced, with documentation. On-site inspection is possible. Hu0Zfl0

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, Fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Vss3Qy Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Year of construction: 2007, Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Ciqjkttqz8 Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, Machine/vehicle number: 1516133, Type of input current: DC, Total width: 2,133 mm, Total length: 3,000 mm, Total height: 2,817 mm, Overall weight: 3,150 kg, Filter system from Knoll (as good as new), few operating hours. Currently still in use and can be inspected on site. Net new price: € 110,000.00 Utrciwahb9 Terms of delivery: Buyer bears the costs of transportation. Terms of payment: Prepayment, after inspection.

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, Machine/vehicle number: 320 S-1, We offer for sale 3 pc. (together or separately) refurbished Knoll 320-S type of strap hinge conveyor, which are plants for transporting metal chips and small parts. Original used for Index V100 machines. Decentral use on individual and interlinked machine tools • Central use for waste disposal from machine groups and entire production areas • Suitable for long chips, chip balls, and wool chips • Suitable for wet and dry processing Functions: 1. Collection of the chips/parts 2. Transporting of the chips to the discharge point on the upper belt span Additionally for wet processing 3. Collecting of the cooling lubricant 4. Separating of chips and cooling lubricant 5. Buffering of cooling lubricant 6. Transporting of the cooling lubricant for processing, return pumping station or machine Cxxzbzwm2M Dimension and technical data in the attachement photos. It can optionally be equipped with an other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The KNOLL chip conveyors can be viewed at our site in Hungary at a pre-arranged time. If you are interested, we will provide you with additional information and pictures.

Year of construction: 1999, Condition: excellent (used), Helmut Knorr L-450-1-W Pile Lifter Stacking lift with automatic lift system max size 50 x70 cm In very good condition Czdigoetx

Condition: ready for operation (used), Year of construction: 1985, length in total 3850 mm band width 280 mm conveying height Abwurfhöhe 1200 total power requirement Förderer 0,15 + Pumpe 1 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 4 x 1,3 (0,4) x 1,7 m No. 5530 Cccogb8 1 used Scraper belt conveyor KNOLL KNOLL 370 K-2 Insertion / feeding area approx. 370 x 2050 x 285 mm Tank approx. 250 l plus belt volume (approx. 250 l) Pump approx. 228 l / 1 bar

Condition: excellent (used), Faceplate Fq2Py3R diameter 450 mm Height 110 mm Jaw height 55 mm Long-cone shot : large diameter 100,5 mm small diameter 85 mm Cone length 73 mm External thread for lock nut : Thread 130 x 4 Parallel keyway 16 mm

Condition: excellent (used), Used 450 kva Volvo Diesel Generator Engine diesel Volvo TAD1640GE Stamford alternator, RPM 1500, Hertz 50, Phase 3, Voltage 400, Working hours 85, Ujlavircfb

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 450 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 450 cm - Depth : approx. 110 cm - Length : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR45 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 10.900,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : Uasm2Iv097 If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: as good as new (ex-display), Year of construction: 2019, We are offering a used as an exhibition machine type of Knoll Lubicool mobile high pressure unit for machine tool with a few operations hours. The system cleans the cooling lubricant and provides the machine with high pressure. The unit only was used for short test period. Description: The transfer pump pumps the dirty CL from the machine tool into the compact filter The compact filter seperates chips and the soiling from the CL, which flows in the clean media tank The dirty fleece is collected in the sludge container The high pressure pump provides the machine tool with cleaned CL through swichable outputs The integrated touchpad allows the control and visualization of the most important system parameters. It is suitable for - demanding machining processes - deep hole drilling in one move - processing with difficult materials (e.g. high-alloyed steel, titanium, copper, bronze) - original equipment and retrofitting Properties and benefits - space-saving and flexible installation - fast intallation and easy retrofitting - effective filtration via belt filter - high pressure up to 150 bar - KNOLL-Smart Connect control incl. Touchpad Bei0Wuq - LED-status light - short amortization time Equipment: - KNOLL-Compact filter KF (with filter fleece) - KNOLL-High pressure pump type: KTS 20-30-T-G (5,5 kW) - Transfer pump (0,63 kW) - Filtered fluid tank 150 l - Sludge container - Two valve blocks with a total of 8 switchable outlets - Includes interface cable to the machine tool (for Tornos Deco machines) - 400 V/50 Hz Powersupply: 400 V/50 Hz - Includes frequency converter for high pressure pump - Control: KNOLL-SmartConnect incl. touchpad and LED status light - With pipe set Dimensions: L/W/H: 1496x600x1198 mm Approx. price of new equipment: ~22.000 EUR If you are interested, we will provide you with additional information and pictures. The KNOLL Lubicool unit can be viewed at our site in Hungary at a pre-arranged time.

Condition: used, Year of construction: 2010, Chip removal, scraper conveyor belt with coolant pump KNOLL 400 K-1/400 chip removal conveyor with KSB ETAPRIM pump Chip removal conveyor belt with scraper belt manufacturer: KNOLL type: 400 K-1 series: 446984 Year of construction 2010 total length: 5500mm approx ejection height 1200 mm strip width: 400 mm Cqmg2Umps8 horizontal length: 3500 mm applicator length: 2200 mm Feeding opening: 350x450mm The distance between flights is approx. 350mm Puller chain drive via gear motor Bauer 0.25 kW 11 rpm - Coolant tank with integrated pump KSB ETAPRIM 32-120 13m3/h centrifugal pump Insertion height approx. 300 mm Conveyor belt height: 1900 mm Belt speed approx. : 1.1 m/min. Mains connection 400 Volt, 50 Hz Length: 5500mm total edge: 700mm total height: 1900 mm weight approx: 800 kg in very good condition

Condition: excellent (used), Total length: 4,000 mm, Total width: 450 mm, KNOLL CHIP CONVEYOR automatic - electric Cxd8Yifmpq Belt 4000x450mm completely refurbished, with tank and pump for emulsion.

Condition: excellent (used), Year of construction: 2010, Knoll 400 S-1/330 chip conveyor very good condition Dpkyzj H-200cm W-170cm L-488cm Weighted -740kg

Condition: good (used), Year of construction: 2012, For sale here is a screw spindle pump coolant pump from Knoll type: KTS 50-74-T incl. drive motor. Bkoswy98Lw The pump works without any problems.

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm Btru2Z70Ra bore depth 320 mm swing diameter mm total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2019, Knoll KF 400/3400 coolant filtration system B0Tsxhxf08

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW Ctvkj3Zati RPM: 2930 Loading capacity depending on viscosity.

Condition: used, Year of construction: 1999, liter capacity 28 l/min bei 40bar total power requirement 6,6 kW kW weight of the machine ca. t dimensions of the machine ca. 1,62 x 0,8 x 1,20 m Ccbuzvc

Condition: good (used), Year of construction: 1999, We offer you: Filter system KNOLL HF 150/1500 Year of construction 1999 Ccldt92Xmy Condition: used

Condition: used, Knoll AE 1114 Coolant cleaning system Cleaning system Brand: Knoll Type: AE 1114 Year of construction: 2000 4 feed pumps installed For further technical data, see type plate Liquid cooler: Brand: HYFRA Type: TRK 70 technical data see type plate You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! Dpdjtr You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Knoll KTS 50-120-T screw pump, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cj2Qwrogbh

Condition: used, Year of construction: 2006, Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinged belt conveyor, scraper belt conveyor Gr2Ka73Vj -Machine used: Scherer VDZ80 BAZ -Manufacturer: Knoll, chip conveyor with coolant container -Type 240 S-1 -Conveyor belt width: 240 mm -Outlet height: 940 mm -Drive: 0.25 kW / 9.2 rpm (1.6 m/min) -Cooling water pump: GRUNDFOS type: MTT4-40/4 -Individual components: see photos -Total dimensions: 2640/1020/H1480 mm -Total weight: 538 kg