Three knife trimmer automatic with integ

Kolbus HD 151 P

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm Gisdpfxjga Dite Ahzjw min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 13,084,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included Giodsv Nv Svopfx Ahzsw

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Giedexyff Nepfx Ahzew Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: good (used), functionality: fully functional, Maximum size: 360 x 310 mm Minimum: 140 x 100 mm Book block thickness: max. 60 mm, min. 3 mm Cover size: max. 642 mm, min. 203 mm Speed: up to 18,000 cycles/hour Collating machine: • 18 stations • 18 Feeder 3681 • 3714 Reject module Controls: • Misfeed and double sheet detection • 2 jogging elements Perfect binder: • Command unit • 35 clamps • Clamp spacing: 18" • Infeed channel with vibrator • Jogging station • Nipping station • Milling and roughening station • Double combined spine processing station • Unit for spine gluing with hotmelt • Spine gluing unit • Hotmelt side gluing unit • Gluing system • 2 pre-melters • SF-Stream cover feeder • Cover scoring: 2 to 6 lines • Delivery unit Standard accessories: • 1 set of operating manuals Gsdpfxeu Eubxs Ahzsiw • Condition: Clean, in very good, fully functional condition • Availability: Immediately

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, cutting width (max.): 1,150 mm, Equipment: safety light barrier, Polar 115 EM paper cutting machine, manufactured in 1982, with programmable control, air table, and light barriers. In good condition and available immediately. If you are interested, we would be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment. Gsdpfx Ahjzivbmezeiw

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Gsdpfx Aezgdafshzsiw Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Polar 66 paper cutting machine, manufactured in 2000, machine number 70H1275, with programmable control and light barriers, in good condition, available immediately. Gjdpfjzivdnsx Ahzjiw If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Condition: ready for operation (used), Year of construction: 1988, technical documents automatic feeder tools and documentation Gsdpsyagn Tjfx Ahzeiw

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Giedpfxevtcvis Ahzew Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: ready for operation (used), MM 360 - 2 up trimmer kit, castings only ! Gisdpfx Ahoir A E Iozsw