Perfect Binder with endsheet feeder

Kolbus Ratiobinder KM 470

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Nedpfxoizi Ivs Agrjlg Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: ready for operation (used), Size: 510 x 290 x 65 mm Speed: 10.000 c/h Equipment: gathering machine: • chain tensioner with hand feeding station controls: • missing and double sheet control intermediate elements: • spiral raceway • hand fed • jogging element • book block feeder • endsheet feeder perfect binder: • 32 clamps • jogging station • resting table • fold pressing station • milling and roughening station • hotmelt spine gluing unit • cam controlled • trolley spine gluing unit Njdpfx Aodyk N Tsgrolg • PVA (cold glue) side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring • cover pressing station • 2. cover pressing station • lay down device

Condition: good (used), functionality: fully functional, Maximum size: 360 x 310 mm Minimum: 140 x 100 mm Book block thickness: max. 60 mm, min. 3 mm Cover size: max. 642 mm, min. 203 mm Speed: up to 18,000 cycles/hour Collating machine: • 18 stations • 18 Feeder 3681 • 3714 Reject module Controls: • Misfeed and double sheet detection Nlodpfsu Eubxsx Agrsg • 2 jogging elements Perfect binder: • Command unit • 35 clamps • Clamp spacing: 18" • Infeed channel with vibrator • Jogging station • Nipping station • Milling and roughening station • Double combined spine processing station • Unit for spine gluing with hotmelt • Spine gluing unit • Hotmelt side gluing unit • Gluing system • 2 pre-melters • SF-Stream cover feeder • Cover scoring: 2 to 6 lines • Delivery unit Standard accessories: • 1 set of operating manuals • Condition: Clean, in very good, fully functional condition • Availability: Immediately

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Still in production. Nlodpeyux Sgefx Agrsg Test possible at any time. Available immediately.

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube Njdpfx Asx Ary Eegrelg - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 1999, functionality: fully functional, Size: max 480 x 320 x 80 mm; min 140 x 100 x 2 mm Cover size: max 642 mm; min 203 mm Book block thickness: max 80 mm; min 2 mm Speed: max 7.500 c/h; min 1.200 mm Equipment gathering machine • hand feeding station • 21 feeders 3691/18 • reject gate 3614 • pile delivery Universo 244 • seperation element • jogging element perfect binder • 30 clamps • PVA (cold glue) spine gluing unit • hot melt side gluing unit • IR intermediate dryer • gauzing station • stream cover feeder • 2 pressing stations • HF dryer optionales Equipment:--not included-- • PUR spine gluing unit Nlsdpfstuwilox Agrjg • premelter for PUR gluing unit

Condition: good (used), Size: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover size: max 642 mm; min 203 mm Speed: max 12.000 c/h Equipment gathering machine • 18 stations • feeders 3691 • reject gate 3614 controls • miss and double sheet control • ASAC automatic self-adjusting calipers intermediate elements • spiral race away Nlsdpfxsrgpqcj Agrog • 3 jogging elements • connected with perfect binder • 21 clamps • milling and roughening station • 2 hot melt spine gluing units • hot melt side gluing unit • 2 premelters • SF stream cover feeder • SF cover nipping and pressing station • smooth lay down device conveyor system • ca. 30 m • connected with three knife trimmer • three knife trimmer MM Zenith 3672 compensating stacker • compensating stacker Müller Martini standards • standard accessories • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 Nledpfjzhwu Eex Agreg (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Year of construction: 1997, condition: used, Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery Nledpfx Agjnxinkoreg optionales Equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • conveyer system ca. 20 m • three knife trimmer Kolbus HD 150

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment Nledpfx Agerf U Iiorog gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives compensating stacker • compensating stacker CB 16 • counting device • delivery right