Centering and end processing machine

Krause Maschinenhandels & Service GmbH Mobile Quick Centering

Condition: new, Year of construction: 2024, Functionality: fully functional, - Weight approx. 11,8 Kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, thus crane capacities, man hours and energy are saved if machines are used for this purpose, you have to crane to the machine and then also back again to the commissioning area - the time loss for 2 centering holes alone is immense. - Ready for use in seconds Bfznowhyiby - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing at the machine) - All components are made in Germany - Centering Din 333 form A, 60°, 5, 6,3 and 8 mm. Other wishes are also possible.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Custom made dynamic postforming maschine made by Maschinen&Service Ziemer GmbH for producing worktops (2 rounding) and windowsills ("nose"version). Postforming radius R10; min length panel 1500mm; witdh max 1000mm. Postforming maschine for medium size producer. Bgj3Z9X3La

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! B3Tzuut

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 15211K100, Automatic Screen Printing Machine for Crate Printing Bkrrjvfnz70 Electro-pneumatically controlled screen printing machine for flat printing, with micro-processor control, touch screen display for the adjustment of the required parameters. Equipped with feeding, deposit and take-off station. Pneumatic squeegee and flood bar pressure ajustable via manometer, pneumatic squeegee switching, with squeegee quick clamp device, squeegee stroke, squeegee pressure and flood bar adjustable. The printing movements are individually adjustable during set-up. Flat printing machine with 2printing stations, servo-controlled turning unit for crates, incl. crate reception. In each station the crates will be turned by 180° thus they can be printed from four sides. Machine with parallel lifting upper frame, printing size: approx. 400x 600mm. With motor-driven squeegee move, incl. XY-adjustability for the screen frame and safety equipments. Pressured air connection of 6bar necessary, connection power: 230V, 50 Hz.

Condition: refurbished (used), Your competent service partner for overhauling assemblies! C93Jala Our service includes the overhaul of assemblies such as workhead, grinding headstock and tailstock of the Karstens and Bahmüller brands. Our service also includes the repair of the friction gear of Karstens workpiece headstocks. Cylindrical grinding machines are too heavy and too large to be easily transported. Their individual assemblies can usually be easily dismantled and shipped by a forwarding agent. We can dismantle, clean and measure these assemblies and replace parts. Or they can be upgraded and expanded with new technology. After completion, the assemblies are then sent back and the cylindrical grinding machine can resume its work after assembly.

Year of construction: 2025, Condition: new, Screening plant for loading wood pellets, semi-mobile New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance Chwyl20Coe - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: used, SKU : LT004 Location : Germany Make : Pharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Type : Main Fraction Tank No. : 12462 Year of construction : 2021 Pressure Working pressure : 3 Bar Vacuum possible : check Working pressure jacket : 6 Bar Vacuum possible jacket : check Main Features Material : Stainless steel Volume : 20.5 Ltr. Motor : 0.09 KW Specified Features - Stainless Steel Reactor Reactor : check Capacity : 15,0 Ltr (20,5 Ltr ) Vessel sizes : dia,250 x315mm Outlet : 3/4 With jacket : (4,5 Ltr, 0,19m2) Max. temperature : -10/95 degr.C. Cfk3Awcsb8 With propellor stirrer : Magnetic ZETA, Type BMRT 50 W EX S Dk Motor : 0.09 kW, 230-400 Volt, (Ex) Speed mixing shaft : 125-860 rpm Stainless Steel Reactors Material : Stainless steel 1.4404 (316L) With switchgear : check Total height : +/- 1,5 M2 CE : check Mounted on legs : mobile skid With switch : check ATEX compatible : check Extra Specifications : - The tank is equipped with a pressure gauge, temperature sensor, level switches and valves (manually or pneumatically operated), safety valve and a rupture disc; The vessel is provided with a cooling jacket and temperature control. -System connections for product inlet and outlet, Nitrogen or Process air, waste air via inlet nozzle, CIP system, Electrical connections/ power supply, Control system, Cooling water - Vessel inside electropolished Ra

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm Fuedou38 - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Operating hours: 0 h, Condition: new, Mobile trough vibrator for slide grinding Btyfz2N Type: TV25-M TROG VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Mobile and universal - Mobile vibratory grinding system with integrated treatment of process fluids - Integrated sieve box for separating the workpiece and grinding tools - Compact design for large work containers including soundproofing - Plug & Play system: plug in the 230V power supply and get started Trough vibrators are characterized by their compact design and universal application. Their U-shaped worksheets allow very large workpieces to be machined relative to the size of the system. Our mobile TV is unique in that all the components that are required for vibratory finishing are compactly and mobile mounted on a trolley. An integrated cascade cleans the process liquid, workpieces can be separated by means of a sieve box and various grinding tools can be stored in slide-in compartments. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: excellent (used), Functionality: fully functional, APEX Tool Group GmbH Mobile extraction booth, with table frame, CBC, Filtronic Model: CBC Type: Filtronic Condition: Used Technical data: 230V AC B3H0Oneo23 50/60Hz 5A 250VA General information: Mobility: The cabin can be used flexibly on a worktable or trolley, allowing versatile use in different work areas. Large working area: A large front opening provides a spacious working area without the obstruction of a glass panel. Low noise: The cabin is characterized by low noise levels. Practical equipment: Inside there is fluorescent tube lighting (2 x 39 W) and 4 230 volt appliance connection sockets. Connection options: The cabin can be connected to a central extraction system via a 160 mm connection. The required minimum extraction volume is 180 m³/h, the maximum extraction volume is 230 m³/h. ESD safety: The booth is ESD-safe, which makes it suitable for use with sensitive electronic components. Compact dimensions: The cabin measures 760 x 1275 x 625 mm (L x W x H), making it a space-saving solution. These features make the CBC extraction cabin an efficient and flexible solution for various applications in workshops and laboratories, especially for work where fumes or particles need to be extracted.

Condition: good (used), Year of construction: 2018, Code: 0423 Brand: IVAT GMBH - GERMANY Model: IVAT.160 - CE Standard Cntb0Qhz High pressure cyclonic dust collector with wheels - CE Standard - Year 2018 Motor Kw 2,25 three-phase Max capacity m3/h 3740 Collection bin diameter mm 650 detachable Main mouth diameter mm 200 Connection with 3 mouths diameter mm 100 each Automatic filter cleaning device Wheels on base Overall dimensions mm 750 x 1300 x 2200 h Weight kg 180

Year of construction: 2020, operating hours: 1,000 h, Condition: good (used), Functionality: fully functional, outer dimension length: 18,000 mm, inner dimension height: 5,000 mm, inner dimension width: 5,000 mm, length (retracted): 3,000 mm, Mobile filter system with foldable tent for painting and blasting work on large components. - Accordion principle max. length 18m, min. length 3m - 4 mobile filter units, 2 on each side, can be switched on separately - with interior lighting - Partition wall in the middle - including 10 replacement filter mats for painting B2Zcislfjo - including 4 replacement filter mats for jets

Condition: used, SKU : LT007 Location : Germany Make : Pharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Type : Solvent Tank No. : 12474 Year of construction : 2021 Pressure Working pressure : 3 Bar Vacuum possible : check Working pressure jacket : 6 Bar Vacuum possible jacket : check Main Features Material : Stainless steel Qz08B Volume : 120 Ltr. Specified Features - Stainless Steel Reactor Material : Stainless steel 1.4404 (316L) Stainless Steel Reactors Reactor : check Capacity : 120 Ltr (150 Ltr) Vessel sizes : dia.492 x672mm Dished bottom : check Dished top side : check Outlet : G1 With jacket : (21,0 Ltr, 1,02 M2) Max. temperature : -10/95 Degr.C. With propellor stirrer : Magnetic ZETA, Type BMRT 50 W EX S Dk Motor : (Ex) Speed mixing shaft : 125-860 rpm With switchgear : check Total height : +/- 1.5 M2 CE : check Mounted on legs : mobile skid With switch : check ATEX compatible : check Extra Specifications : The tank is equipped with a pressure gauge, temperature sensor and level switches, valves (manually or pneumatically operated) including safety valves. Additionally, a pH sensor and a level measurement device and sight glass light  are installed. The tank is provided with a cooling jacket and temperature control. -System connections for product inlet and outlet, Nitrogen or Process air, waste air via inlet nozzle, CIP system, Electrical connections/ power supply, Control system, Cooling water - Vessel inside electropolished Ra

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: LAS23, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. Cpovkxl7 With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically counted up by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 30W (optional: 20W, 50W) - Laser class 1 - Wavelength 1064nm - Marking field size 70x70mm (optional larger) - marking software EZCAD in German / English - Pilot laser (simple preview, clear text preview) - Laptop incl. holder with Windows operating system - Structure made of aluminum profile - Connection 230V including cable reel - air cooled - Dimensions: approx. 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Extraction integrated

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump Nxhfl - load capacity 200 kg - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm - Color gray aluminum

Condition: new, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Ul3Ky8Tgof Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: like new (used), Year of construction: 2023, operating hours: 185 h, Functionality: fully functional, machine/vehicle number: 910, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression - Raised filling area R9Uakabndl - Flat bottom plate on tracked chassis Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, ND electrostatic system, mobile with 10.50 m hose package - Electrostatic paint spraying system, mobile - not Ex version - Low-pressure double diaphragm pump DD10 - Low-pressure material pressure regulator - Trolley with wheels, cladding and air regulators - Ultra-fine pressure regulator for air and paint - 5 liter top tank with lid - Electrostatic gun 8 bar with swivel joint - Electrostatic control unit - Electrostatic cable 15m C93Gqci

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 440#neu, power: 440 kW (598.23 HP), overall weight: 2,400 kg, total width: 2,000 mm, total length: 5,000 mm, total height: 23,000 mm, pressure: 3 bar, heating capacity: 440 kW (598.23 HP), gas connection: möglich, Equipment: type plate available, Heating mobile heating center Heating trailer new 440 kW output Entire installation new For questions please call 0176 84704272 Further systems and sizes available, see also our other ads all information without guarantee Bn3Yp8Ac0Ya Price on request

Year of construction: 2024, Condition: new, Functionality: fully functional, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) Cj22Jikb - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Mobile pressing plant with belt or packing press - construction depends on output per hour More detailed Information on request! Pryvue

Year of construction: 2021, operating hours: 3,790 h, Condition: used, Equipment: all wheel drive, CAT M322F wheeled excavator, year of manufacture: 2021, operating hours: only 3,790h!, adjustable boom, quick coupler OilQuick 70/55, hydraulic ditch cleaning bucket OQ 70/55, demolition grid, heating & air conditioning, seat heating, radio, hammer and grapple line, central lubrication, reversing camera, dozer blade, engine: CAT [129kW/175hp], weight: 21,800kg, good condition, ready for immediate use, On request, we can make you a leasing or financing offer, Mr. Mihm (Tel.) will be happy to assist you, Further information can be found on our homepage, Errors and prior sale excepted! _____ CAT M322F wheeled excavator, year of manufacture: 2021, operating hours: only 3.790h!, adjustable boom, quick coupler OilQuick 70/55, hydraulic ditch cleaning bucket, demolition grid, heating & air conditioning, seat heating, radio, hammer and grapple line, central lubrication, reversing camera, dozer blade, engine: CAT [129kW/175hp], weight: 21.800kg, good condition, ready for immediate use, Upon request, we will submit a leasing or financing offer. Mr. Mihm(Tel gladly assist you., For more information, visit our homepage., mistakes and prior sale reserved! Dqqvyt

Year of construction: 2024, Condition: new, Functionality: fully functional, IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. Bnv7Mdjos9H As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually - Glue roller speed: 60 rpm - 2 straight wheels, 2 turnable wheels with brake - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply.

Year of construction: 2014, Condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Jiamd0B Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: new, Year of construction: 2025, We build special solutions for your application Enclosed you will find information about our company and an example system This is the largest mobile ATEX vacuum cleaner in the world with a capacity of 15t/h Chcoambl We would also like to refer you to our video about the machine. Enter WWTec in youtube Please feel free to contact us