Drying furnaceDestoningmachine

Kreuzmayr OTS 4

Year of construction: 2025, Condition: new, 11 m² dryingsurface, powersupply:7,5 kW, totally in inox-steel with temperature and humidity control, Nslhsb Ipxwoccqlscp for fruits and vegetables, meat,...

Year of construction: 2025, Condition: new, 22 m² dryingsurface, powersupply:7,5 kW, totally in inox-steel Njlhceb Iztuecqlocp with temperature and humidity control, for fruits and vegetables, meat,...

Condition: new, Year of construction: 2025, in line bottle filler for 4 bottles from 0.2 to 2 liter on fixed chassis with storage tank Ncolhccqo Hmvhjljp

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module Nceljv Ivn Uohccqlop

Condition: used, electric motor, three-phase motor Nslsurn R Eshccqlocp -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

Condition: used, 4-axis industrial robot, handling robot, Scara robot, handling robot, loading robot, assembly robot STÄUBLI type TS80 + CS8C bmn Year of manufacture 10/2011 Factory no. F11/5JN5A1/A/01 Year of manufacture 2011 Number of axes 4 Handling weight (nominal load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeatability (X+Y) 0.01 mm Repeatability (Z) 0.004 mm Repeatability (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Working stroke axis 3 (Z-axis) 200 mm Rotation range axis 4 (R-axis) +-500° Nominal speed / maximum speed: Nslhcjvmhphocqljcp Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot version floor mounting Control STÄUBLI CS8C bmn Factory no. F11/5JN5A1/C/01 Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Control dimensions (W x H x D) 450 x 310 x 450 mm - Control adjacent with removable "teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport space requirement L x W x H 900 x 700 x 1500 mm very good condition

Condition: used, Foot switch, safety foot switch, foot pedal, foot controller, foot remote controller, pedal controller Nslhcshu Sumecqlocp -Manufacturer: L-TEC, foot controller type FC-4 -Connector plug: 5-pin -Total dimensions: 300/155/H190 mm -Weight: 4.2 kg

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the processed element 45 / 150mm - min / max height of the processed element 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up / down, right / left - spindle 2 manually adjustable right / left - spindle 2 electrically adjustable up / down - spindle 2 and 3 are equipped with brakes from above: - 3 input, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from below: - pressure at the inlet - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth regulation of feed speed 6-24m/min - 3kW feed motor - feed on Cardan shafts - length of the inlet top 1970mm - automatic top lubrication system - diameter of the exhaust port 1x150mm, 2x140mm - dimensions length/width/height 3070x2000x1800mm - weight 2000kg ADVANTAGES Nelhceq Nnpfocqljcp - German production - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: PLN 125900 Net price: EUR 29620 Net price calculated according to the exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2023, Length of sliding table: 3.200 mm Cutting width: 1.250 mm Cutting height max: 155 mm Cutting height with scoring saw: 130 Saw blade diameter max: 450 mm Ncelhccqjv R Ixqjljp Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 7,3 kW Rotation speed steps: 3 Rotation speed adjustable electrically: Yes Scoring aggregate: Yes Scoring saw height adjustment: electro-motive Scoring saw width adjustment: manually Scoring saw cutting width: Spacer discs Controlled axes: Yes Number of controlled axes: 3 Motorised rip fence: Yes Winkelanschlag, Digitalanzeige: Length Mitre difference measure adjustment: Yes FELDER X-Roll sliding table: Yes FELDER Easy-Glide: Yes Control: FORMAT 4 X-MOTION Declaration of CE-conformity: Yes Conformity marking: CE mark, UKCA-Zeichen Total connection: 7,35 kW Weight: 1.200 kg Space requirement Length: 3,35 m Space requirement Width: 2,1 m Space requirement Height: 1,8 m

Condition: used, Year of construction: 2011, Technical details: Ncslhccqou Nvp Sjljp Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, table extension, extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, Ncolhceu R Tcxecqlop max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: like new (used), Technical data for the wide-span shelving system: Racking system: SSI Schäfer Type: WR 600 Technical data for installation: Number of rack rows: 01 pcs. Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x wide-span shelving uprights, second choice (new) Material color: sendzimir galvanized Upright profile: 60 x 31 x 1 mm Incl. cross and diagonal braces, 01x swivel castor / stop castor | 01x fixed castor Castor Ø: 100 mm (bolted framework) 2,195 mm high 1,050 mm deep 08x Wide-span shelving traverse, second choice (new) Material color: RAL 7035 light grey Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped crossbar Bracket: 5 HK (hooks) Clear width: 2,400 mm 04x chipboard II. Choice (new) Thickness: 22 mm Dimensions: 2,380 x 960 mm Design: all-round butt joint 16x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Nelhcceqhkh Asqljcp Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces Nolordkf Aehccqlocp ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: excellent (used), CATALOGUE NUMBER 7595 Technical data: - loading hopper inlet 1400x1400mm - outlet for shredded wood fi 160mm - working width of the rotor 600mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 40x40mm - V-Rotor - sieve 10mm - pressure drawer - electric auto reverse - dimensions l/w/h 1810x1210x2120mm - weight 1220kg ADVANTAGES - German production - V-Rotor - DTR documentation - pressure drawer - auto reverse - used chipper, very good condition Njlhccjv R E Ameqlscp Net price: PLN 47,900 Net price: PLN 11,270 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2023, Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Feedrate max: 10 m/min Electromotoric height adjustment: Yes Glue system granulate: glue pot below feeding chain Quick-change glue pot: Yes Suitable for PUR glue: Yes FORMAT 4 glueBox: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Njlhcsv Rd Rcjcqlscp Control: FORMAT 4 SMARTOUCH Conformity marking: CE mark, UKCA-Zeichen Total connection: 15 kW

Year of construction: 2016, Condition: good (used), machine/vehicle number: KPF2000, Model: KPF2000 Manufacturer: Kreuzmayr Maschinenbau GmbH (Austria) Manufacturing year: 2016 Specifications: - For filling liquid, solids-free foods such as puree, juices, wine, cooking oil, milk products etc. into spouted pouches; - Adjustable dosing capacity 100-2000 ml; - Capacity: around 1000 - 2000 bags/h; - The dosage of the filling is done by a built-in volumetric piston dosing system Ncelhccqjv N Tznolep - Maximum filling temperature is up to 95°C. - Consists of: automatic pouch-loading, vacuuming, cleaning the spout, cap feeding and inserting, capping, discharging and liquid level controlling, nitrogen injection; - Including cap supply unit; - Equipped with buffer tank with level monitoring; - CIA cleaning system; - Control panel; - Dimensions approx. 1430 (+750) x 1510 x 1800 h mm; - Electric power: 2.0 kW; - Electrical supply: 400 V, 50 Hz, 3 phases; - Recommended pressure of supply: 8 bar; - Air consumption: per cycle: ~5.5 Liter at 7 bar; - Filtered compressed air, not oiled, 0°C to +50°C;

Condition: used, Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Nslhccou R S Nwjqljcp Touchscreen, swivel control panel, program memory, automatic pressure bridge adjustment, Feed by means of transport chain, extendable workpiece support, diamond milling cutter in synchronized and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, GLUEBOX, pressure unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be tilted pneumatically, Flush / radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, Corner copying unit with diamond-coated cutter, Radius scraper, Radius scraper with motorized positioning control surface scraper, insert-controlled surface scraper, infeed stop, Release agent spraying device, Lubricant spraying device, Cleaning agent spraying device, Year of manufacture 2022 ----- Technical data ----- Edge thickness of rolls: 0.4 - 3 mm, Edge thickness of strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. Workpiece length: 140 mm, feed speed: 10 m/min, Screen diagonal: 15 inch, Dimensions of jointing cutter: D 80 x 64 mm, Power of jointing cutter: 1.1 kW, Cross-cut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 200.12.010.13, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm Ncolhcjtvfihecqlop 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Ncolhccetq Nlrjqlop Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: excellent (used), CATALOGUE NUMBER 7596 Technical data: - loading hopper inlet 1030x1730mm - outlet for shredded wood fi 160mm - working width of the rotor 600mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 30mm, 25mm - pressure drawer - electric auto reverse - diameter of the exhaust port 160mm - dimensions l/w/h 2200x1260x1450mm - weight 960kg ADVANTAGES - German production - original DTR documentation - pressure drawer - auto reverse - used chipper, very good condition Ncelhccqov R Ewdolep Net price: PLN 45,900 Price net: 10800 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2018, Working dimension X: 3.500 mm Working dimension Y: 950 mm Working dimension Z: 80 mm Njlhccjv Iflcoqlocp Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 5 Linear tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 11 FORMAT 4 Drilling aggregate DH 17 6H 1S: Yes Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: enclosed cabin Workpiece length measurement: Yes Handheld terminal: Yes Automatic lubrication: Yes Automatic central lubrication: Yes Control: PC control

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Ncelhccsrrh T Aeqlep Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Original packaging Nslhccqjv E Szlolocp Equipment and technical data: Circular saw unit swivels 90-45°, Saw blade D=250-450 mm, cutting height max. 155 mm, electric height adjustment Electric angle adjustment with digital display for height and angle Crosscut stop 3200mm swivels 90-45°, 2 stop jaws Machine stand kappa 450, circular saw table made of gray cast iron Operating tools 3 speeds 3500/4500/5500 rpm, 50Hz Electric panel saw 3x400V 5.5kW (7.5PS) S6, SD Start, CE with brake Cutting width 1250mm Top guard cutting width 1250 mm, hood for 90° and hood for angle cuts height adjustable and made of can be swung away from the work area. Saw blade diameter 450mm, suction connection D-100 mm Parallel stop with digital display and automatic length compensation when the saw blade is swung, stop ruler length 1200 mm, can be swung away Format sliding table cutting length 2800mm anodized, trimming shoe (W-Alu/An-Gray) 10-year Felder guarantee on „X-Roll“, the Felder format table guide system! Extension 1250x650 mm X-Roll with movable support rail and digital angle display, cutting length 2800/3200 mm Location: Hochheim Availability: Immediately Sale on behalf of the customer

Condition: used, CATALOGUE NUMBER 7583 TECHNICAL DATA - extraction capacity approx. 3300 m3/h - 2.2kW motor - 380V voltage - number of bags 2pcs - chip bag diameter 630mm - chip bag length 1150mm - hose connector 4x125mm - shipping dimensions L/W/H 1950x1100x1420mm - total dimensions L/W/H 1950x1100x2550mm - weight 100kg ADVANTAGES - Polish production - mobile machine - used, unpainted extractor - very good condition Nolsv Iyt Uohccqljcp Net price: PLN 3300 Net price: EUR 780 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2012, Working dimension X: 3.740 mm Working dimension Y: 1.360 mm Working dimension Z: 130 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface Tool clamping system: HSK-F63 Tool changer positions: 26 Number of exchangeable units: 1 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: permanently attached Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Ncolhccqsvw Salsljp Vacuum pump: Yes Capacity vacuum pump: 90 m³/h Safety device: Safety mat FORMAT 4 5-MOTION PLUS: Yes FORMAT 4 Chipping deflection plate: Yes FORMAT 4 DH 20 6H 1S: Yes Crosshair laser: Yes Workpiece support aids: Yes Disc tool changer: Yes Pickup tool changer: Yes Control: PC control Software: FORMAT 4 WOOD FLASH Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 25 kW