Empty bottle inspector

Krones

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Included in the price - Dismantling - Loading onto trucks - Export documents Ksdpfxjxhf His Ag Asdu

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine Kodez Sr Imopfx Ag Ajdu - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: used, Year of construction: 2004, Overview Krones PET bottling line (wet part) built in 2004 for still and carbonated water: a CONTIFORM S8 stretch blow moulder blocked with a MECAFILL isobaric filler and capper, followed by a CANMATIC hot-melt labeller with CHECKMAT inspection. Nominal output is 13,500 bottles/hour on 0.5 L. The line runs 0.5 L, 1.0 L and 1.5 L PET bottles with PCO 1881 neck finish. It is still installed and under power, and can be visited. Technical data - Output: 13,500 bph (0.5 L) Kjdpfx Ajz Sl Nrjg Asdu - Formats: 0.5 L (11.9 g preform), 1.0 L (22.9 g), 1.5 L (25.5 g) - Neck finish: PCO 1881 - Filler: isobaric, 50 valves, pitch 113 mm - Capper: 10 heads, pitch 113 mm - Blow moulder: 8 cavities, mould sets for all three formats - Electrical supply: 230/400 V, 3-phase, 50 Hz - Year of manufacture: 2004 Scope of Delivery - Stretch blow moulder | Krones | CONTIFORM S8 | 8 cavities, moulds for 0.5 L, 1.0 L and 1.5 L | 2004 - Preform feeding | . | Preform tipper, preform hopper and infeed chute | 2004 - Transfer | Krones | Gripper transfer from blow moulder to filler, 164 grippers - Isobaric filler | Krones | MECAFILL | 50 valves, pitch 113 mm | 2004 - Capper | Krones | 10 heads, pitch 113 mm - Air extraction | Galvani Clean Technology | Extraction system for the filler | 2004 - Nitrogen dosing | VBC | NITRODOSE SYSTEM | Liquid nitrogen dosing - Saturator | Fluid Engineering | EURO SAT | 2004 - CIP unit | Fluid Engineering | EURO SAN | 2004 - Labeller | Krones | CANMATIC | Hot melt, wraparound paper labels, 10 plates | 2004 - Laser marker | Domino | Mounted on the labeller - Inspection | Krones | CHECKMAT | Fill level, cap and label inspection at the labeller outfeed - Conveyors | Bottle conveyors and accumulation table up to the shrink wrapper infeed (shrink wrapper not included) - Spare parts | Main mechanical spare parts for the blow moulder and filler block Condition Used - still installed and under power in production. The line can be visited on request. Availability Available from 1 March 2027, after dismantling. Location: Italy.

Condition: used, *consisting of: * - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour *Details*: - Control Siemens S7 - different format sets available, Ksdpfx Asz Sdtveg Aodu - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Condition: used, Year of construction: 2003, machine/vehicle number: RV150, Consisting of: - Rinser 20 nozzles - Filler 20 valves Kdsdez Rp U Ijpfx Ag Aju - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm Kdodpfjz I Tbrex Ag Asu - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 2012, Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery - Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 Kdedpfx Agoz I Rfno Aju - Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper - Application: filling and closing of glass bottles - Filling system: volumetric filling - Filling valves: 60 - Capping heads: 12, plastic screw caps - Output: approx. 15,000 bottles/hour - Adjusted to bottle sizes: 0.75 l (Ø75 mm x 265 mm) and 0.33 l (Ø65 mm x 175 mm) - Control: Krones iPanel CD - Operating hours: 41,381 h (production counter 40,754 h) - Electrical supply: 400/230 V, AC 3/N/PE, 50 Hz, full load current 36 A - Construction: stainless steel and glass safety enclosure Technical Data - Labeller - Labelling: cold glue, 2 stations for front, back and neck labels - Output: 20,000 bottles/hour - Formats: 0.25 l Vichy, 0.5 l, 0.7 l and 0.75 l GDB and Schlegl bottles - Pitch circle diameter: 600 mm - Container plates without servo drive - Infeed and outfeed direction 90°, counter-clockwise rotation - Date coder installed on the machine - Glue pumps included - Operating hours: 36,000 h Condition Used, both machines in operation in a beverage production environment; labeller regularly maintained by the OEM. Availability Available from . Location: Germany.

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details - Leistung: bis zu 50.000 bph - Bauart - Rotierend - Arbeitsrichtung gegen den Uhrzeigersinn (r-l) - Modulare Maschine - Höhe des Förderbandes: 1150 mm - Etikettentyp: Kaltleim - Position des Etiketts - Brust/Hals - Stanniol - Körper - Rücken - Siegel - Flaschenformate Kedpfx Asv I Tnxog Asdu - 0,25l Vichy-Flasche - 0,5l GDB - 0,7l GDB - 0,75l Gastro-Flasche - Anzahl der Aggregate: 3 - Teilkreisdurchmesser: 1800 mm - Anzahl der Flaschenteller: 45 - Teilungsdurchmesser: 125,6 mm - Ausrichtung der Flaschenteller über Danfoss-Servoantriebe - Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf - Stoppstern am Einlauf - Leimwalzen aus Stahl - Vorbereitet für Flaschenausrichtung durch Kameraerkennung - Heissleimwerk für Siegeletikett von Robatech - Heissleimdüse an der Etikettierstation montiert - Siemens S7 - Technische Dokumentation vorhanden Lieferumfang - Datumscodierer - Leimpumpen Unipump H (heizungsgesteuert)

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Kdsdpfez Hai Tjx Ag Aju Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) Kdedpfoz Euubsx Ag Aou • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.