Belt grinding machine

Kuhlmeyer ZBS 2

Condition: good (used), Year of construction: 2006, functionality: fully functional, Table size: 3000 x 1000 mm Drive power: 4.0 kW Belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Belt length: 9000 mm Space requirement: 4750 x 2300 mm Bledpozlh Nzofx Alzsp Machine height: approx. 2500 mm Compressed air: 6 bar Features: - Two belts for pre- and finish grinding - Triangular guide for the belts, providing unobstructed visibility and freedom of movement - Pneumatic belt tensioning with ball bearings - Adjustable belt speed - Tilting of the belts up to 90° - Belt self-centering - Pneumatically opening belt channels - Manual workpiece movement in 3 axes - Each axis with brake or locking mechanism - Vacuum clamping for the workpieces

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: Bsdpjv S Sr Rjfx Alzslp RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0204231, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, height adjustment type: electric, total length: 4,800 mm, total width: 1,500 mm, Kuhlmeyer ZBS 2 Grinding Machine / Belt Grinder – Year of Manufacture 2002 – Industrial Version For sale is a robust and powerful grinding machine, type Kuhlmeyer ZBS 2, built in 2002. This machine is manufactured in Germany and is specifically designed for industrial use in metalworking. Technical Data: Manufacturer: Kuhlmeyer Maschinenbau GmbH Type: ZBS 2 Year of manufacture: 2002 Machine No.: 0204231 Connection voltage: 400 V Control voltage: 230 V Connected load: 6.5 kW Rated current: 16 A Frequency: 50 Hz Compressed air: 6 bar Weight: approx. 2,500 kg Description: The Kuhlmeyer ZBS 2 is a heavy-duty industrial belt grinder, ideal for grinding, deburring, and finishing metal components. Thanks to its sturdy construction and high own weight, the machine runs extremely smoothly and enables precise processing results, even on larger workpieces. Features & Equipment: - Massive, long-lasting construction - Suitable for continuous operation - Pneumatic components (6 bar required) - High grinding capacity with 6.5 kW drive - Made in Germany – proven industrial quality Condition: Used, fully functional. Age- and use-related signs of wear are present, but technically ready for operation. Areas of Application: - Metal fabrication - Stainless steel processing - Grinding and finishing work - Industrial and workshop use Bodpfx Aleyvrtzjzelp Other Information: Viewing by appointment possible. Loading can be assisted. All information without guarantee. Subject to prior sale.

Year of construction: 1988, condition: good (used), table dimensions 2500x800mm built-in extraction 4kW engine electric adjustment of the table up / down Bodsih H Eaepfx Alzslp power supply 380V