Industrial robot

Kuka KUKA KR30-3 + KR60 mit KRC4

Condition: excellent (used), Year of construction: 2011, operating hours: 8,600 h, Functionality: fully functional, overall weight: 700 kg, load capacity: 65 kg, arm reach: 2,033 mm, controller model: KRC4, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Kuka robot with pallet changer: The Kuka and the system are in very good condition, the robot had a payload of 2 kg. The control of the periphery is Robofact. This can be changed to a new project. The controller is KRC4 and is at a level where Kuka still offers support. EURO pallets 1200x800mm go through the pallet changer. You get: -Kuka with control incl. Robofact for peripherals - Pallet changer - I/O modules via Profi Bus -all protective grids with door and seal -Blister conveyor belt -Schunk gripper 0O0Nlsm

Condition: like new (used), Year of construction: 2015, load capacity: 16 kg, arm reach: 3,100 mm, ROBOTERARM MANUFACTURER: KUKA MACHINE TYPE: KR30 L16-2 TECHNICAL SPECIFICATIONS CARRYING LOAD: 16 kg REACH: 3102MM YEAR OF CONSTRUCTION: 2015 Drhafr CONTROLS: KRC4 Firmware: 8.3.21

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 10027704, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, pivoting range: 700 °, controller manufacturer: KUKA, controller model: KUKA KR C4, teach pendant manufacturer: KUKA SMART PAD 00-291-556, control cabinet width: 790 mm, control cabinet height: 1,070 mm, input voltage: 400 V, input current: 22 A, type of input current: three-phase, repeat accuracy: 0.15 mm, Model: KUKA KR 30-3 Axes: 6 Max. reach: 2033 mm Nominal load capacity: 30 kg Additional load (arm / swing arm / carousel): 35 kg / 0 kg / 0 kg Max. total load: 65 kg Repeatability (ISO 9283): ±0.15 mm Swivel range: 700° Max. speed: up to 322°/s (depending on axis) Installation position: floor, ceiling Protection class: IP65 (housing & robot hand) B282Tllk9U Operating temperature: +10 °C to +55 °C Control: KUKA KR C2 edition 2005 Installation area: 850 mm x 950 mm Total weight: approx. 665 kg Control cabinet dimensions (W x H x D): 790 x 1070 x 550 mm Input voltage: 3x400V Input current: 22A Type of input current: three-phase alternating current (AC) Noise level: < 75 dB

Condition: good (used), Year of construction: 2017, Industrial Robot Manufacturer: Kuka Type: KR30-3 Year of Manufacture: 2017 Operating Hours: 1,000 Bdxdewjggvt Reach: 2,033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 Controller Weight: 150 kg Software V8.3.42 Kuka Touch Panel Kuka Connecting Cables 130325ä

Condition: excellent (used), Kuka Robot Here we offer you a Kuka robot. (as good as new/unused) Kuka Robot KR 60L30-3 Bhqjbmp9H arm length: 1220 mm axes number: 6 Weight 665kg Axis / Axis 1 (A1) ± 150˚ : 128˚/s Axis / Axis 2 (A2) +75˚/--105˚ : 102˚/s Axis / Axis 3 (A3) +158˚/--120˚ : 128˚/s Axis / Axis 4 (A4) ±350˚ : 260˚/s Axis / Axis 5 (A5) ±119˚ : 245˚/s Axis / Axis 6 (A6) ±350˚ : 322˚/s With sealed software Rated payload: 30kg Control system KRC4 Type: KR 60 L30-3 Scope of delivery: (See pictures) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Year of construction: 2017, Industrial robot KUKA KR60 L30-3 Year of production: 2017 Payload: 30 kg Reach: 2429 mm Dqlqar Control: KUKA KRC4 2 pcs. available

Condition: refurbished (used), Year of construction: 2014, Model KR 30-3 Type Robot Arm Axes 6 Payload 30 kg Reach 2033 mm Repeatability 0.05 mm Weight 665 kg The KUKA KR 30-3 robot is a 6-axis robot arm, it has a payload of 30 kg and a reach of 2033 mm. Manufacturing applications include Remote TCP. Sx0Gprxmq Common applications of the KUKA KR 30-3 include: Additive Manufacturing, Assembly, Dispensing, Finishing, Material Handling, Palletizing, Remote TCP.

Year of construction: 2009, Condition: excellent (used), Kuka KR30-3 C KRC2 ED05 including panel, cable and control cabinet. Ceabav9Kbu 26.000 operating hours We are happy to offer you the robot also reconditioned!

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, load capacity: 30 kg, arm reach: 2,429 mm, Kuka KR 60 robots are known for their adaptability and flexibility to a variety of applications. They can be precisely programmed offline, are very dependable for process planning, require little maintenance, and are equipped with motors and gearboxes that ensure high performance in cycle times and accuracy. The repeatability of the KUKA KR 60 HA robot is 0.05 mm. Some common applications: - Additive Manufacturing - Assembly E9Hx0Z0V2 - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 L30 HA Condition: USED Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Year of construction: 2008, Industrial Robot Manufacturer: Kuka Type: KR60-3 Year of Manufacture: 2008 Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka Controller KRC2ed05 Weight: 185 kg Processor: 2 GHz Language: WinXP Software Version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka Connecting Cables 7 m/15 m Uj9U9Dufst ä130325 1 piece

Condition: excellent (used), Kuka Type: KR 60 3 C2 FLR ZH02 Kuka robot with KTL measuring probe 69-186-130 100/90 KRC2 Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C2 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 ° Control unit KR C2 Kuka control unit KRC2 ed05 with KCP2 Control Panel Teach Pendant Control unit KRC2 Supply voltage : 3X400V Mains frequency : 50/60 Hz Full load current : 32A Mains fuse : 25A Weight : 316kg Handheld control unit: Type: Kuka smartPAD Display: scratch-resistant, industrial-grade touch display Display size: 8.4" Dimensions (W x H x D): 240 x 290 x 50mm Weight: 1100 kg This robot is a training robot from a university project It was not previously in industrial use! Condition: very good condition with few operating hours Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Dozjaf We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2008, We offer here a used and tested tested KUKA KR60 jet Robot built in 2008. Czu3Rx2Te8 The robot is fully functional and is equipped with a KRC2 ED05 controller. In addition to the robot itself, there are 6 columns of 3,000mm height and the linear guide with approx. 24 meters.

Condition: excellent (used), Year of construction: 2018, Brand KUKA Model KR 60-3 Type Robot Arm Axes 6 Payload 60 kg Reach 2033 mm Repeatability 0.06 mm Weight 665 kg The KUKA KR 60-3 robot is a 6-axis robot arm, it offers a 60 kg payload and 2033 mm of reach. The repeatability of the KUKA KR 60-3 robot is 0.06 mm and the robot weight is approximately 665 kg. Common applications of the KUKA KR 60-3 include: Additive Manufacturing, Assembly, Dispensing, Finishing, Material Handling, Palletizing, Remote TCP. Blp79Sr0Bj8

Condition: used, Year of construction: 2008, operating hours: 7,505 h, Functionality: fully functional, machine/vehicle number: 764775, overall weight: 665 kg, load capacity: 30 kg, This is a KUKA KR 30-3 industrial robot Year of manufacture 2008 We are also happy to offer you this robot refurbished! Gxbfvye The robot includes the following options: LoadDetermination

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, load capacity: 60 kg, arm reach: 2,033 mm, Kuka KR 60 robots are known for their adaptability and flexibility to a variety of applications. They can be precisely programmed offline, are very dependable for process planning, require little maintenance, and are equipped with motors and gearboxes that ensure high performance in cycle times and accuracy. The repeatability of the KUKA KR 60 HA robot is 0.05 mm. Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising Bjcuvxtql7A - Material Handling - Dispensing Model: KR60 HA Condition: USED (Will be painted according to your request) Year: 2015 (2012 option is also available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Year of construction: 2005, Industrial Robot KUKA Kuka KR60-3 Year of manufacture 2005 Reach 2033 mm Weight 665 kg Payload 60 kg Kuka KRC2 Controller Weight 185 kg Processor 733 MHz Language Win95 Software version V4.1.7 SP08 Kuka KCP2 Teach Pendant Kuka Connecting Cables 7 m / 15 m (repainted) Dyh0Art Can also be offered with a KRC2ed05 controller Kuka KRC2ed05 Controller Weight 185 kg Processor 2 GHz Language WinXP Software version V5.6.6 130325ä

Condition: excellent (used), Year of construction: 2015, KUKA used / tested KR60L45-3 Year of construction: 07/ 2015 Weight: 665 kg Load capacity: 45 kg Bo8Wodueh Reach: 2230 mm Operating hours: with 7-axis KRC4 controller, connection cable and Smartpad1 X11 interface KL1000 linear axis built in 2015 with a total length of approx. 11 m with cable drag and cable

Condition: good (used), Year of construction: 2015, Industrial Robot Manufacturer: Kuka Type: KR30-3 F Foundry Year of manufacture: 2015 Beiykym Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 Controller Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: good (used), Year of construction: 2008, Industrial Robot Manufacturer: Kuka Type: KR500-2 with KRC4 Operating Hours: 12,000 Year of Manufacture: 2008 Reach: 2,826 mm Weight: 2,375 kg Payload: 500 kg Kuka KRC4 Controller Year of Manufacture: 2017 Weight: 160 kg Bn0Niu8Wdqi Software Version: V8.6.11 Interface: X11 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: good (used), Year of construction: 2014, Industrial Robot Manufacturer: Kuka Type: KR30-3 Year of Manufacture: 2014 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 Controller Bi8Mak3H0Jr Weight: 150 kg Software V8.3.40 Interface X11 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: good (used), Year of construction: 2015, Industrial Robot Manufacturer: Kuka Type: KR60-3 F Foundry Year of manufacture: 2015 Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka KRC4 Controller Uj7Lmxlpj7 Year of manufacture: 2013 Weight: 163 kg Software: KSS 8.5.4 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: good (used), Year of construction: 2016, Industrial Robot Manufacturer: Kuka Type: KR30-3 Year of Manufacture: 2016 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 Controller Weight: 150 kg Software V8.3.40 Bfb8Dk9Vj8 Interface X11 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: good (used), Year of construction: 2011, Industrial Robot Manufacturer: Kuka Type: KR30-3 Year of manufacture: 2011 Reach: 2033 mm Weight: 665 kg Payload: 30 kg Kuka KRC4 Controller Ckdrgdmbn2 Weight: 150 kg Software V8.3.40 Kuka Touch Panel Kuka Connecting Cables ä130325

Condition: like new (used), Year of construction: 2012, load capacity: 240 kg, arm reach: 2,900 mm, ROBOT ARM Drhawx MANUFACTURER: KUKA MACHINE TYPE: KR240 R2900 TECHNICAL SPECIFICATIONS CARRYING LOAD: 240 kg REACH: 2900 MM YEAR OF CONSTRUCTION: 2012 CONTROLS: KRC4

Condition: like new (used), Year of construction: 2015, load capacity: 300 kg, arm reach: 2,500 mm, ROBOT ARM BRAND : KUKA MODEL : KR300 R2500 ULTRA TECHNICAL DESCRIPTION LOAD CAPACITY : 300 KG REACH (MAX.) : 2500 MM SEASONS : 2015 Cbndn2Rm8S CONTROL TYPE : KRC4 SOFTWARE VERSION : 8.3.21