Separation device kit 15 - 1 pc

KUKKO

Condition: new, Hydraulic nut splitter 56 M14-M24, quality 10 and above, KUKKO · For splitting stuck or overtightened nuts (quality class 5, 6, 8, and 10) without damaging the threaded bolt. · The double offset allows use even in confined spaces. · The hydraulic system requires only a small amount of force. · The splitting wedges of the nut splitter are wear parts. Predpfx Ais Ab I D Uj Tsc · Blunt, chipped, or broken wedges must be replaced. · The dimensions for nuts refer to the wrench size! · Other technical specifications: weight: 6.6 kg For nuts mm: 22 - 36 mm For nuts: 7/8 - 1 7/16 ?

Condition: new, Hydraulic nut splitter 56 M4-M14, quality 10 and above, KUKKO Pjdps Ab I D Ijfx Ai Terc · For splitting stuck or overtightened nuts (quality grades 5, 6, 8 and 10) without damaging the threaded bolt. · The double offset allows use even in confined spaces. · The hydraulic system requires only a small amount of force. · The splitting chisels of the nut splitter are wear parts. · Dull, chipped, or broken chisels must be replaced. · The dimensions given for nuts refer to the wrench size! · Other technical specifications: Weight: 2.865 kg For nuts: 9/32 - 7/8"? For nuts (in mm): 7 - 22 mm

Condition: new, Screw extractor set 49-U-B M 5-M 16, 25-piece, including matching HSS drill bits, KUKKO · For removing broken screws and bolts · Complete with screw extractors, HSS twist drills, and drill guide sleeves for trouble-free drilling, even deep into threaded holes of broken parts Prjdpo Ab I Dzsfx Ai Toc · Contents: 1 piece each: Socket nut SW 10 / 11 / 13 / 14 / 17 mm, Profile pin 3.2 / 4.8 / 6.4 / 8.0 / 8.7 mm, HSS twist drill 3.2 / 4.8 / 6.4 / 8.0 / 8.6 mm, Drill sleeve 6 mm / 3.2 mm, 8 mm / 3.2 mm, 9 mm / 3.2 mm, 10.0 mm / 3.2 mm, Drill sleeve 10 mm / 4.8 mm, 11 mm / 4.8 mm, 12 mm / 4.8 mm, 13 mm / 4.8 mm, Drill sleeve 13 mm / 6.4 mm, 14 mm / 6.4 mm, Case with insert for screws: M 5 - M 16 Contents: 25 pieces

Condition: new, Nut splitter M22-M33, mechanically operated, quality 6, KUKKO Prodpfx Aj Ab I Dusi Toc · Mechanical · For splitting seized or overtightened nuts without damaging the threaded bolt. The dimensions specified for nuts refer to the wrench size! · Other technical specifications: Weight: 2.55 kg For nuts (mm): 32 - 50 Design: Mechanical

Condition: new, Nut splitter, M18-M24, mechanical, quality 6, KUKKO · Mechanical · For loosening seized or overtightened nuts without damaging the threaded bolt. The dimensions given for the nuts refer to the wrench size! · Other technical specifications: Weight: 0.66 kg Prodpfx As Ab I Dnsi Toc Design: Mechanical For nuts, mm: 27 - 36

Condition: new, Stud bolt turning set 53-A for bolts with diameters of 6-8-10-12 mm, 4-piece set, KUKKO · For tightening and loosening stud bolts · Clamping of the stud bolts is achieved by three eccentrically arranged rollers in the tool body · Stud bolt turning body made of steel Predpfs Ab I Dhsx Ai Tjc · With 1/2-inch internal square and 21 mm external hexagon · External extension for left- and right-hand operation with a ratchet or wrench (not included in the scope of delivery) · Supplied in a textile bag · Application: for damage-free removal and installation of stud bolts · Other technical features: Contents: 4 pieces · Weight: 810 g · Material: Steel Contents: 4 pieces Material: Steel Suitable for bolt diameters: 6-8-10-12 mm

Condition: new, Stud bolt extractor, clamping range 18-25mm, KUKKO · The knurled wheel with a groove ensures that the stud bolt is securely pressed against the internal gearing. · During extraction, the stud bolt is located within the key area and cannot break off. · Robust design. · Operated using an open-end or ring wrench (not included). · Application: for damage-free removal and installation of stud bolts. Clamping range: 3/4 - 1 inch? Prjdpfj Ab I Dbsx Ai Tec Clamping range mm: 18 - 25 mm

Condition: new, Separator set 15, nominal size 2, L-Boxx, KUKKO · Complete set · Includes separator, puller, and extension Application: for removing ball bearings, roller bearings, inner rings, and other components that fit flush · Other technical features: Contents: 1 separator, size 2, 1 puller, size 2, 2 extensions, size 2 · Packaging: L-Boxx Contents: 1 separator, size 2, 1 puller, size 2, 2 extensions, size 2 Pjdo Ab I A Dspfx Ai Tjrc Nominal size: 2

Condition: new, Separator set 15, nominal size 1, i-Boxx, KUKKO · Complete set · Includes separator, puller, and extension Application: For removing ball bearings, roller bearings, inner rings, and other parts that fit flush. · Other technical features: Contents: 1 separator, size 1, 1 puller, size 1, 2 extensions, size 1 Prsdpj Ab I Awsfx Ai Tec · Packaging: i-Boxx Nominal size: 1 Contents: 1 separator, size 1, 1 puller, size 1, 2 extensions, size 1

Condition: new, Separator set 15, nominal size 0, i-Boxx, KUKKO · Complete set · Includes separator, puller, and extension Application: for removing ball bearings, roller bearings, inner rings, and other parts that fit flush Prsdpfx Ae Ab I Aqoi Tec · Further technical features: Contents: 1 separator, size 0, 1 puller, size 0, 2 extensions, size 1 · Packaging: i-Boxx Contents: 1 separator, size 0, 1 puller, size 0, 2 extensions, size 1 Nominal size: 0