Complete sawmill (stationary)

LINCK

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Podpfx Ajzvy Eijf Ujra

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Predpfx Aovdyr Nef Uea

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Prsdpfxongz N Is Af Uja

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Prodpfxszuz I Nj Af Uoa

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Pedpfowgbxzox Af Uora A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Psdpfx Aszf Nbxof Ujra

Condition: good (used), machine/vehicle number: 9049, LINCK DV 35 prism turner: Pjdpfx Afjzrxfys Uera - Two toothed feed rollers, electrically driven (two separate motors) - Prism rotation, electrically driven (SEW 5.5 kW motor) - Large prism clamping cylinder, MADER KDI-125-0250-A-PPV-M, manufactured in 2017 Very robust machine construction.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor Pjdjw D Hy Sspfx Af Usra - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Prodpozfwlfjfx Af Uoa Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911294-0120, Rotary indexing table DV 55, manufactured in 2014, can be used for pre- or post-machining. Prsdjzpygtjpfx Af Usa In excellent condition! We have 2 units in stock at our Schlitz warehouse.

Condition: excellent (used), functionality: fully functional, I sell a complete square of raw material imported from Germany and available for pickup in Osla near Boleslawiec. Manufacturer: Holtec + Falcone Germany, Range of processed diameters: from 14 to 65 cm Range of processed lengths: from 2.0 mb to 15 mb In the price of the sorting plant a very large stock of spare parts, i.e. chains, reducers, motors, cables. The raw material yard consists of: - Long timber feeder - 2 x Feeder for short timber, Predpfx Afevcqi Ae Usa - Kesla brand crane at the feeding table for leveling the raw material on the table, - Complete operator station (cameras, monitors, computer), - Sorting plant system operating software, - Scanner of the amount of sorted raw material, - Falcone 550 debarking machine from 2014, - Dripping saw, diameter 1600 mm, - Metal detector, diameter max 650 mm - Single boxes: 44 pcs. - Bark removal system from under the debarking machine - Removal system for waste generated during dripping. - Automation control , full optimization based on the set parameters . - Line capacity: up to . 300 000 m3 per year in two shifts

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Pjdpfoyctwtsx Af Uora

Condition: reconditioned (used), Year of construction: 1996, Sawing unit, manufacturer Linck, type KCS 6 Base frame with 4 saw spindle units Prodpozdiuljfx Af Usa Twin-spindle system with 6 adjustable saw heads Cutting height 370 mm, weight 12,400 kg The machine is currently being overhauled in our workshop.

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. Podpfetqdfiex Af Uera System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height 45 - 160 mm width

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Psdpfxjv Raqxo Af Uera Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.