Electric 3-wheel forklift

Linde E16-02

Condition: used, functionality: fully functional, machine/vehicle number: H2X386, Year of construction: 2021, operating hours: 7,373 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork length: 1,200 mm, empty load weight: 3,184 kg, drive type: Elektro, Electric 3-wheel forklift Chassis number: H2X386 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Kdsdpez Dlmxsfx Akwjt Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery year of manufacture: 2021 Battery condition: 60 - 80% Description: Workshop-tested with UVV approval, new battery Side shifter, fork positioner, 3rd valve, rear work light, front work light, roof cover, windshield, CE certificate, 3-wheel, Blue spot front/rear, red warning lines.

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Kdedsl Sli Depfx Akwst

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 5,225 mm, free lift: 1,719 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New Technical condition: New Battery voltage: 48V Battery type: Lithium-ion Kjdpfez A Nkxex Akwjdt Side shifter, 3rd valve.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 16,832 h, load capacity: 1,600 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Kodez A Nkropfx Akwedt Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 48V Sideshift, Third valve,

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, number of ink cartridges: 8, Roland CO 640-F300 - RIP Versaworks March 2024 - USED EXCLUSIVELY with original Roland inks - Last maintenance performed on 27-11-2025 (maintenance + printhead replacement) Machine available immediately In daily operation Configuration: Wh CMYK Re Or Gl Kdedpfx Akjyuqv Rowet VIDEO AND LIVE DEMONSTRATION AVAILABLE

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,612 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 48V Sideshift, Kdsdpfoz A Nihox Akwet 3rd valve, full cab,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 13,473 h, load capacity: 1,600 kg, lifting height: 5,225 mm, free lift: 1,719 mm, fuel type: electric, mast type: triplex, construction height: 2,321 mm, drive type: Elektro, Electric three-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Kedpfjz Axgfsx Akwjdt Battery voltage: 48V Battery year of manufacture: 2023 Side shifter, 3rd valve

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) Kdedpfxeiq U Tqs Akwot CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 13,165 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,374 kg, total height: 2,100 mm, total length: 2,000 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16-02 / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Kdedoz Apvkjpfx Akwst Lifting height: 4.625 mm Closed height: 2.100 mm Free lift: 1.500 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V/625 Ah (2018) Charger: Sonstiges Ladegerät 48 V - not tested Tyres: Superelastik 18x7-8 (60%) / 15x4,5-8 (0%) Service weight: 3.374 kg Length: 2.000 mm Width: 1.100 mm Year of manufacture: 2018 Operating hours: 13.165 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1309015 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,298 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, gearing type: other, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 125/75 - 8, overall weight: 3,369 kg, total height: 2,130 mm, total length: 1,950 mm, total width: 1,100 mm, fuel: electricity, LINDE E 16 - 02 / 386 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.620 mm Closed height: 2.130 mm Kdedpfx Aez Aprfokwjt Free lift: 1.500 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2018 Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18 x 7 - 8 (80%) / 125/75 - 8 (70%) Service weight: 3.369 kg Length: 1.950 mm Width: 1.100 mm Year of manufacture: 2019 Operating hours: 13.298 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Pulse control Internal no.: 1308888 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Kdjdpjp U Umkefx Akwot

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,161 h, load capacity: 1,600 kg, lifting height: 2,940 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, battery capacity: 460 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,195 kg, total height: 2,000 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 2.940 mm Kjdsz Aqp Sepfx Akwsdt Closed height: 2.000 mm Free lift: 1.400 mm Mast: Duplex (2F294) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 460 Ah v. 2019 Charger: ohne / Without Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (50 %) Service weight: 3.195 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2019 Operating hours: 3.161 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309225 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 13,447 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,248 kg, total height: 2,121 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.620 mm Closed height: 2.121 mm Free lift: 1.480 mm Mast: Triplex (3F462) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: Dreiphasig 48 V 75 A not tested Tyres: Superelastik SE 18 x 7 - 8 (90%) / 15 x 4,5 - 8 (50%) Service weight: 3.248 kg Kdedpfx Akoz Aqp Ejwst Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2021 Operating hours: 13.447 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309227 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: like new (used), Year of construction: 2019, Roofing batten Raimann line with minibundling and stacking. Included is: - infeed mechanism - Raimann Profirip 340 (2019) - outfeed rubber belt conveyor - ejecting roller conveyor - accumulating conveyor (before minibundling) - minibundling machine (4 mb/min) - accumulating conveyor (after minibundling) - stacker (7 layers/min) Raimann Profirip 340 parameters: Year of manufacture: 2019 Speed: 10-80m/min Ksdpfx Aomk S S Ejkwedt Main motor: 55kW Cutting height: 15-140mm Maximum widht: 340mm Line is in good working condition, still in operation and is available for viewing in sawmill in Slovakia. Reason of sale is upgrade to 250m/min planer line. For more information or to arrange viewing feel free to contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,119 h, load capacity: 1,600 kg, lifting height: 4,100 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,423 kg, total height: 1,950 mm, total length: 1,850 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 C - 02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.100 mm Closed height: 1.950 mm Free lift: 1.300 mm Mast: Triplex (3F410) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V Charger: Dreiphasig 48 V 100 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (50%) Service weight: 3.423 kg Length: 1.850 mm Width: 1.100 mm Year of manufacture: 2019 Operating hours: 9.119 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309268 Kodpez Aqc Ejfx Akwjdt Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.