Complete sawmill (stationary)

LINDNER

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Pjdpfx Aewxmb Eokvjra Delivery time: immediate.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Prodpfxsv S Hyvo Akvoa Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Podpfx Akswtbyrevora Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Prjdpfxjwtbyxe Akvoa Counter knife: yes Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: used, Year of construction: 1995, operating hours: 4,423 h, functionality: fully functional, machine/vehicle number: 435, Lindner RZ S1000 – Industrial Shredder – 32 Blades – Ø 20 mm Screen Lindner RZ S1000, manufactured by Maschinenfabrik Lindner, machine number 435, year of manufacture 1995. For sale is a used Lindner RZ S1000 industrial shredder. The machine comes from industrial use and is being sold due to a business closure or restructuring. The machine is equipped with a powerful 18.5 kW three-phase motor and a hydraulic unit. According to the technical documentation, the rotor has 32 blades, and the machine has a screen with 20 mm openings. Technical Data * Manufacturer: Maschinenfabrik Lindner * Machine Type: RZ S1000 * Machine Number: 435 * Year of Manufacture: 1995 * Drive: Three-phase motor * Motor Power: 18.5 kW * Drive Motor Speed: 1,000 rpm * Motor Frame Size: 200 L * Voltage: 400 V * Frequency: 50 Hz * Design: B3 * Hydraulic Unit: Type S1000 * Hydraulic Output: 5 l/min * Oil Tank: 15 l, Castrol Vario HDX, factory fill * Operating Pressure: 90 bar * Hydraulic Drive Motor: 0.75 kW * Speed: 1,380 rpm * Voltage Hydraulic Motor: 220/400 V * Design: B5 * Hydraulic Cylinder: 50/30 x 300 mm * Cylinder/Rod Diameter: 50/30 mm * Stroke: 300 mm * V-Belt Ratio: i = 3.6 * Roller Chain: i = 4 * Rotor Speed: 67 rpm * Number of Blades: 32 * Blade Shape: square * Screen: Hole diameter Ø 20 mm * Material Conveying: TKF30 * Paint: RAL 7035 / RAL 5002 * Machine Weight: approx. 2.5 t * Operating Hours according to Counter: approx. 423 h Condition Prsdpfx Aozux Hpjkvsa The machine is in used condition, consistent with its age. The technical data was taken from the available original documents. An on-site inspection is possible by arrangement and is highly recommended. Sold as is. If interested, further photos, technical documents, and information about the machine can be provided. Location: by arrangement Price: on request / negotiable

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg Pjdpfezkvgljx Akvora ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, Model Type: Hammel, Arjes, Lindner, Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 Prodpfxoztmgue Akvsa AT-TEC Recycling Solutions GmbH is a metal fabrication company specializing in the production of shredding tools for shredder machines, complete with an in-house welding department. Our experienced team takes pride in offering high-quality and customized solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet the requirements of our customers. Our customers come from various industries, including waste management, recycling companies, and machine manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.

Condition: new, Year of construction: 2026, Model Type: Hammel, Arjes, Lindner, Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 Pjdpfsztmghox Akvjra VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metal fabrication company specializing in the production of shredding tools for shredder machines, complete with an in-house welding department. Our experienced team takes pride in offering high-quality and customized solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet the requirements of our customers. Our customers come from various industries, including waste management, recycling companies, and machine manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.

Condition: used, machine/vehicle number: 10657, Rotor diameter: approx. 368 mm Rotor width: approx. 1270 mm Number of rotor blades: approx. 60 Stator blades: one row Psdpfx Akoznpc Uevjra Drive motor: 37 kW

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute Prsdpeugf Dwofx Akvoa - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis