Folding Machine

LOTZE HZK 20

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm Iedpfx Aev Tpxqenwoic -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm Iijdpfjrklfrex Anwec - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Iodpfxsx Av Uaj Anweic

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Ijdpfx Anoxwnltowjic Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: used, Year of construction: 1970, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm Iisdpoywzhqofx Anwsc -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm Iiodpsy T R Swefx Anwec • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm Ijdpfox Harmex Anwoic total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm Iijdpoy Raitefx Anwsc work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Year of construction: 2023, operating hours: 5 h, condition: like new (used), functionality: fully functional, cutting length (max.): 75 mm, number of blades: 8, rotor diameter: 180 mm, machine/vehicle number: 20710, GETECHA Beside-the-Press Granulator / Plastic Grinder Model: Series A 5.10.1 (Compact Granulator) Application: Immediate recycling of sprues and rejected parts, designed for beside-the-press operation or small central grinding tasks. Technical Specifications: High-performance German-engineered granulator characterized by a robust design and high-precision cutting geometry. Engineered for low-noise and low-dust material processing. Cutting System: Rotor diameter: 180 mm Cutting length (blade length): 75 mm Number of rotor knives: 7 (HSS quality) Number of stator (fixed) knives: 1 Rotor speed: 270 rpm (optimized for material quality and noise reduction) Performance & Sieve: Maximum throughput: Up to 35 kg/h (depending on material type and screen size) Screen: 6 mm standard (round perforation) Drive & Power: Motor power: 2.2 kW Power supply: 3 x 400V +N, 50Hz Inlet Dimensions: Cutting chamber inlet: 285 x 200 mm Manual feed hopper inlet: 337 x 310 mm Configuration & Features (Version A 5.10.1): Hopper: Specially sound-insulated hopper designed for manual feeding. Iisdpfxsyv Avgo Anwec Mobility: Mobile unit mounted on four casters (two equipped with parking brakes). Material Collection: 5-liter regrind bin featuring a left-side suction port (ø 38 mm) for direct connection to a vacuum conveyor/loader. Finish: Original GETECHA industrial coating in RAL 7035 / RAL 7011. Key Advantages: Versatility: Suitable as a dedicated beside-the-press unit or a small central granulator for technical parts. Durability: Equipped with HSS rotor knives for extended service life; optionally available in a reinforced version for glass-fiber (GF) reinforced plastics. Maintenance Friendly: Superior accessibility for rapid cleaning, sieve changes, and knife adjustments, minimizing downtime during material/color changes.