Hydraulic pressbrakes

LVD PPEB 640 ton x 4500 mm CNC

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Fedpohzbipefx Aa Nopp Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Load capacity: 5000kg. Fedpfet H Rfbsx Aa Njpp

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Fpedpoi Dx Sbofx Aa Nop

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Fedpfx Aju Ibu Rea Nspp Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Year of manufacture 1997 with floor control Lifting height 3 m Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Fpedpfoum I Akox Aa Nsp Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Fedpfolffdyex Aa Njpp Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: used, I have been buying and dismantling halls since 1990. All sizes / designs / nationwide and Austria Do you have a steel hall for sale that needs to be demolished / dismantled? Or do you have a used or new steel hall for sale that has already been dismantled? Then please contact me. I buy and dismantle used steel halls. Over 400 halls dismantled since 1990. Take advantage of my construction experience since 1980. Serious and punctual processing is guaranteed. Non-binding and free advice. Gladly also on site. Fjdpjq Suypofx Aa Njpp

Condition: as good as new (ex-display), For sale Demag wheelblocks Fpodpfxjh Uqibo Aa Nep New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 Fsdpfxouhf Tzs Aa Nopp converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Fpedpst A A Aqofx Aa Nop