Run press

LVD PPEC-7 135/30

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Gedpfx Asza Eiisixjka Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: like new (used), Year of construction: 2008, machine/vehicle number: B0502A0308, functionality: fully functional, operating hours: 1,520 h, pressing force: 85 t, overall weight: 7,800 kg, controller manufacturer: KEBA, controller model: TASC 6000, control type: CNC control, Equipment: CE marking, documentation/manual, For sale: used TRUMPF TruBend 5085X press brake, manufactured in 2008. The machine is in unique technical condition – AS NEW! In January 2026, TRUMPF Polska service replaced all filters and oil, performed calibration, checked the proper operation, and conducted safety tests. The machine has a low number of operating hours – only 1912 hours of hydraulic operation! Hydraulics: Hoerbiger Year of construction: 2008 Maximum pressing force: 850 kN Working length: 2210 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 Increased frame height 5-axis back gauge – X, X5, R, Z1, Z2 Gjdjy Hpnqopfx Aixjka Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB If you have any questions or need additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2017, functionality: fully functional, bending force (max.): 36 t, TRUBEND CELL 7000 High-End Aut. bending cell Year of construction: 05/2017 ADDITIONAL Functions: ToolMaster Bend (incl. Tool Identification System - TIS) Tool gripper for faster tool change (only in conjunction with ToolMaster Bend and gripper changing module) Conveyor belt Additional system pallet Additional mechanical gripper (without jaws) Additional jaws for mechanical finger gripper Gripper changing module incl. tool cleaning station Multi-suction device with flat suction cups and electromagnets TCB - Thickness Controlled Bending STANDARD configuration: TruBend 7036 Cell Edition - Stable Machine frame - Electro-mechanical direct drive (torque motor) - 6-axis backgauge system with stop sensor - Segmented Wila tool clamps without Tool Identification System - TIS Gjdpfx Asyalx Roixeka ATTENTION: lower tool clamp in the same design as the upper tool clamp - Switch cabinet air-conditioning BendMaster (15) - Stable frame and manipulator - Bearing load: 15 kg, max. sheet load: 3 kg - Floor tracks: Welded construction with stable guide rail. Travel 3215 mm - Gripper coupling at BendMaster - Electrical drives - Mechanical finger gripper with jaws LoadMaster Bend - Handling system - Multi-suction device with bellows suction cups - Double sheet detection and separation - Transfer station - System pallet Safety - Safety cell with swing sliding doors: The complete working and danger zone is safeguarded by a safety cell Lighting Control system - PC control with 19“ Touch screen - Mobile operating terminal - Network connection - Teleservice via Internet

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, We are selling several items of SCA (Atlas Copco) equipment from a production cell that was never installed at the end customer. The operating hours are estimated. As this is a dismantled part of the system, there is no guarantee that the system will run independently and completeness cannot be guaranteed. - 3 x dosing head - 3 x control cabinet - 2 x control unit - 3 x drum pump Godeurlzzjpfx Aixeka - Various heatable hoses

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,932 h, pressing force: 87 t, stroke length: 445 mm, total width: 1,800 mm, total height: 2,840 mm, overall weight: 7,800 kg, travel distance X-axis: 600 mm, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 7, This 7-axis TRUMPF TruBend 5085 was manufactured in 2008. It features a press force of 850 kN and a bending length of 2,210 mm. The machine includes a 5-axis CNC backgauge with an X-axis travel of approximately 600 mm and an R-axis travel of around 250 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 5085 CNC hydraulic press brake we have for sale. Contact us for further details. • CE marking: Yes • Distance between columns: approx. 1,750 mm • Throat depth: approx. 420 mm • Open height: approx. 385 mm • Operating pressure: 300 bar • CNC control: TRUMPF CNC control / TASC 6000 • Backgauge: 5-axis CNC backgauge • Axes: X, X5, R, Z1, Z2 • X-axis travel: approx. 600 mm • R-axis travel: approx. 250 mm • Tooling/clamping: WILA hydraulic upper and lower tool clamping; Tooling system: WILA • Axis speeds: • Y-axis rapid: approx. 220 mm/s • Y-axis working: up to approx. 25 mm/s • Y-axis return: approx. 220 mm/s • X-axis: approx. 1,000–1,750 mm/s • R-axis: approx. 330 mm/s • Z-axis: approx. 1,750–2,500 mm/s • Ram/beam working hours: 1,932.8 h • Electrical: • Supply voltage: 3 × 400 V • Frequency: 50 Hz • Nominal current: 24.0 A Godezib I Sjpfx Aixska • Connected load: 17.0 kVA • Control voltage: 24 V DC • Pneumatics: Compressed air connection 6 bar • Safety: • Stopping time: max. 95 ms • Stopping distance at 220 mm/s: max. 10 mm • Stopping distance at 160 mm/s: max. 8.5 mm • Minimum safety distance: 190 mm Technical Specification Bending Length 2210 mm