Labeling machine
4050S
Labeling machine
4050S
ONO plus VAT
€6,650
Condition
Used
Location
Borken 

Show images
Show map
Machine data
Price & Location
ONO plus VAT
€6,650
- Location:
- Dunkerstrasse 29, 46325 Borken/Burlo, DE
Call
Details about the offer
- Listing ID:
- A737-9912
- Reference number:
- 25075
- Update:
- 11.04.2025
Description
Bluhm Weber Legi-Air- 4050S Labeling Machine
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
Ibjdpfx Ajibh Tksfpsc
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
4.14.1 Basic construction
The machine is designed as a closed aluminum profile frame and is very compact.
The control cabinets are integrated in the lower part of the frame.
The main valve terminal is located behind a service door below the control panel.
The system includes four workstation stops.
Operation is via a touch screen.
The control panel is mounted on the right side of the rack.
Ibjdpfx Ajibh Tksfpsc
A labeling system from Bluhm Weber is used in the station; the documentation from Bluhm applies here accordingly.
4.14.2 Functional sequence
- The incoming workpiece carriers with IO modules are stopped, lifted out (positioned) and contacted in sub-stations 10.1 or 10.2.
In these two stations
- Automatic labeling of the IO modules takes place in substation 10.3. The labels and their contents are generated automatically, as is their application to the devices.
- After labeling, the module is finalized in station 10.4, where it is stopped, lifted out and contacted. After finalization, the workpiece carrier is automatically ejected from the station.
Bluhm Weber Legi-Air- 4050S
Seller
Note: Register for free or log in, to access all information.
Send inquiry
Telephone & Fax
+49 2862 ... show
Your listing has been deleted successfully
An error has occurred