CHAMBER FILTER PRESS R&B 800/24

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,100 mm, working height: 950 mm, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, input voltage: 400 V, TECHNICAL DETAILS Sanding width: 1,100 mm Sanding thickness: 3 to 160 mm The machine consists of 2 sanding units, one each at the top and bottom: Top Model: VEGA 311 MRL Working height: 950 mm Sanding belt dimensions: 1,120 x 2,620 mm Sanding roller diameter / power / feed speed: 180 mm / 22 kW / 47 m/s Infeed roller diameter / power / feed speed: 220 mm / 22 kW / 18 m/s Combination roller / sanding pad, power / speed: 12.5 / 16 kW, 9 / 18 m/s Finishing brush unit power: 0.75 kW Adjustable feed speed: 2.5 - 13 m/min Extraction capacity: 11,800 m³/h Motorized height adjustment: 0.75 kW Bottom Model: VEGA U 311 MRF Working height: 920 mm Sanding belt dimensions: 1,120 x 2,620 mm Sanding roller diameter / power / feed speed: 180 mm / 22 kW / 47 m/s Infeed roller diameter / power / feed speed: 220 mm / 22 kW / 18 m/s Combination roller / sanding pad, power / speed: 12.5 / 16 kW, 9 / 18 m/s Finishing brush unit power: 0.75 kW Gedpfx Aszhm Stjptjbp Adjustable feed speed: 2.5-13 m/min Extraction capacity: 15,600 m³/h Motorized height adjustment: 0.37 kW MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Pneumatic sanding belt tensioning

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-253-05-4317, workpiece height (max.): 60 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 800 mm, controller model: Powercontrol PC85T mit Woodwop software, TECHNICAL DETAILS Process: horizontal drilling – injecting adhesive – driving in dowels Workpiece length min/max: 20 mm / 1,250 mm Workpiece width min/max: 50 mm / 800 mm Workpiece thickness min/max: 10 mm / 60 mm MACHINE DETAILS Gbjdpfx Aezhm Sgoptjp Control system: Powercontrol PC85T with Woodwop software Dowels: 8 mm x 30 mm, 8 mm x 35 mm Voltage: 400 V Frequency: 50 Hz Phases: 3-phase EQUIPMENT Drilling unit: 1 drilling and dowel insertion unit, freely programmable Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical clamping cylinders Double diaphragm pump 1:1

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Frequency: 50 Hz Gedpozhm Rijfx Aptjbp Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 208.025, functionality: fully functional, cutting width (max.): 4,200 mm, cutting length (max.): 4,200 mm, stack height: 2,000 mm, Auction of a panel dividing saw with automatic magazine! Gedpjzhm E Hsfx Aptsbp TECHNICAL DETAILS Capacity: 4,200 mm x 4,200 mm Saw blade overhang at 90°: 72 mm Saw blade overhang at 45°: 50 mm Saw carriage feed rate (forward): 0-100 m/min Saw carriage feed rate (reverse): 0-100 m/min Feed rate of program slider: 0-25 m/min Program slider return speed: 80 m/min Collet maximum opening: 84 mm Collet positions: 65/245/395/985/1,605/2,225/2,845/3,465 mm Cross-pressure range: 50 - 1,250 mm MACHINE DETAILS Main saw motor: 14 kW Scoring saw motor: 1.5 kW Electrical supply: 400 V, 50 Hz, 3-phase Automatic magazine Magazine dimensions: 33.1 x 9.4 m Magazine height: 3,600 mm Stack height: 2,000 mm Input stack height: 1,900 mm Magazine speed X: 0-150 m/min Magazine speed Y: 0-150 m/min Magazine speed Z: 0-60 m/min Maximum panel weight: 300 kg Length adjustment of vacuum lifter: 2,000 - 4,200 mm Width adjustment of vacuum lifter: 1,000 x 2,100 mm Vacuum pump: 40 m³/h Rotating device: 90°

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: E1TAH0029, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 304 mm, table length: 600 mm, table width: 300 mm, TECHNICAL DETAILS Grinding length max.: 600 mm Grinding width max.: 300 mm Distance from table surface to spindle center: 585 mm Grinding wheel dimensions: 304 x 31.75 x 76.2 mm Table and magnetic plate Table size: 600 x 300 mm Magnetic plate: 600 x 300 mm Axis movements Hydraulic table longitudinal movement: 650 mm Automatic transverse movement: up to 310 mm Machining: fully automatic in 3 axes Spindle and power Grinding spindle power: 3.7 kW Spindle speed, frequency inverter max.: 2,100 rpm Machine bed: 780 x 750 mm MACHINE DETAILS Dimensions and weight Dimensions: approx. 2,700 x 1,600 x 1,850 mm Machine weight: approx. 1,990 kg EQUIPMENT Fully automatic machining in 3 axes Touchscreen control panel with program management Automatic central lubrication Cooling system with automatic paper filter Enclosed splash guard with lighting Electronic handwheel Gedpfx Ajzgux Ssptjbp

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Gbodpfx Apszgf A Ujtop Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Gjdpfxezf Ircj Aptebp The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive Gbodpozf Id Sjfx Aptjp The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Gsdpfx Ajzf Ibwjptebp Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Gedpfx Apozf Ibdotebp Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565