Angle clamping table

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Rsdpoyh I U Isfx Afcop Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511903V00414, Year of construction: 2019, operating hours: 6,292 h, load capacity: 1,700 kg, lifting height: 5,750 mm, free lift: 1,880 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 1,700 kg Load center: 600 mm Load distance: 410 mm Wheelbase: 1,453 mm Free lift: 1,880 mm Lift height: 5,750 mm Fork dimensions: 50 / 100 / 1,150 mm Fork carriage width: 760 mm Fork outside width min./max.: 316 / 620 mm Rodoyh Eppjpfx Afcep MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,412 x 1,270 x 2,900 mm Weight: 3,470 kg Length incl. back of forks: 1,262 mm Mast height extended: 6,320 mm Overhead guard height: 2,200 mm Seat height: 1,140 mm Arm height: 308 mm Battery voltage / capacity: 48 V / 620 Ah Mast type: Duplex (side-shift) Operating hours: approx. 6,292 h EQUIPMENT Charger Blue Spot rear Operating manual UVV: 06/26

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Rsdpjymmpdsfx Afcsp Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 112672, total length: 6,700 mm, working height: 840 mm, workpiece weight (max.): 350 kg, controller model: RS150, workpiece height (max.): 35 mm, TECHNICAL DETAILS Processable glass thickness: 3-35 mm Processable dimensions (with corner bevel 15 mm) min.: 45 mm Processable dimensions (without corner bevel) min.: 35 mm Permissible weight per conveyor meter max.: 200 kg/m Total load: 350 kg Working speed: 0.5-5 m/min Pneumatic feed pressure: 6 bar Water tank capacity: 360 L MACHINE DETAILS Control system: RS150 Total installed power: 16.5 kW Rodpfsyk Spwex Afcsp Pneumatic feed pressure: 6 bar Water tank capacity: 360 L Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,300 x 2,300 mm Height of working level: 840 mm Total weight (with empty water tank): 2,600 kg EQUIPMENT NC with automatic speed adjustment ABS covers for sound insulation and safety Multi-functional NC Centralized lubrication Adjustable glass removal rate Front adjustment of the rear arrising wheel Stainless steel housing and tanks CN 23 operator interface Programmable logic controller (PLC) integrated in NC Liquid crystal display (LCD) Control keypad with sensitive keys

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Rjdpfx Afjyk Sgiscjp Dimensions of the control cabinet: 1,000 x 480 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Rodpsyi Ub Hjfx Afcsp Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9C0P000082, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, table load: 7 kg, TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Field of view (precision measuring mode): 225 x 125 mm Maximum table load: 7.5 kg Repeatability (standard measuring mode, without moving the measuring table): ±1 µm Repeatability (standard measuring mode, with measuring table movement): ±2 µm Repeatability (precision measuring mode, without moving the measuring table): ±0.5 µm Repeatability (precision measuring mode, with measuring table movement): ±1.5 µm Measuring accuracy (standard measuring mode, without moving the measuring table): ±3.9 µm Measuring accuracy (standard measuring mode, with measuring table movement): ±(7 + 0.02 l) µm Measuring accuracy (precision measuring mode, without moving the measuring table): ±2 µm Measuring accuracy (precision measuring mode, with measuring table movement): ±(4 + 0.02 l) µm Light probe measurement Measurable range (XY): 190 x 90 mm Maximum measuring depth: 30 mm Light probe diameter: 3 mm Probe contact force: 0.015 N Repeatability: ±2 µm Measuring accuracy: ±(8 + 0.02 l) µm MACHINE DETAILS Measuring head weight: 33 kg EQUIPMENT Programmable incident light for precise illumination Light probe for accurate surface measurements Rodpfx Afjyiy I Socep All documentation included Original packaging (OVP)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516220V00299, Year of construction: 2019, operating hours: 6,310 h, load capacity: 1,600 kg, lifting height: 3,180 mm, free lift: 150 mm, mast type: duplex, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Load distance: 374 mm Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase center: 114 mm Aisle width pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Smallest pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Rodpfx Asyia Dkofcjp MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over protective roof: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 6,310 h EQUIPMENT UVV 05/26 Charger Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Front window with wiper Panoramic roof Digital display Interior mirror Operator’s manual

Condition: ready for operation (used), functionality: fully functional, load capacity: 1,600 kg, lifting height: 122 mm, overall weight: 420 kg, TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 908 mm Wheelbase: 1,252 mm Lift height: 122 mm Length incl. fork back: 486 mm Fork dimensions: 55 x 172 x 1,150 mm Outside fork width: 535 mm Ground clearance at wheelbase center: 30 mm Working aisle width for pallet 1,000 x 1,200 transverse: 2,240 mm Working aisle width for pallet 800 x 1,200 lengthwise: 2,128 mm Turning radius: 1,433 mm Axle load with load front/rear: 695 / 1,325 kg Axle load without load front/rear: 331 / 89 kg MACHINE DETAILS Dimensions & Weight Dimensions: 1,636 x 720 mm Tiller handle height: min. 750 / 1,237 mm Lowered height: 85 mm Weight: 420 kg Battery voltage/capacity: 24 V / 390 Ah Operating hours: approx. 9,201 h EQUIPMENT integrated charger Rodpfsyh D Idox Afcep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Rodpfsyg D Svjx Afcop Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.