Textile printing line

Thermal Transfer Press

Year: 2005

Status: functional

Model: Schulze Air press x

Double pneumatic transfer press, semi-automatic model. The pressure can be adjusted using an air pressure gauge, which also

ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. After the transfer is complete, the

will open automatically. Bottom plates are available in different sizes.

• Print format: 400 x 500

• Dimensions: 1.67 x 0.74 x 0.98 m

• Weight (including packaging): 170 kg

• Power consumption: 10 A / 230 V

• Temperature: max. 220 °C
Crsdpfx Aoufknrsd Njb

• Temperature accuracy: ± 0.5%

• Power: 2.4 kW

• Heating time: 12 min. at 180 °C

• Timer range: max. 9 min., 59 sec.

• Operating pressure: 2490 kg

Schulze PRETREATmaker IV

Year: 2017

Condition: good

A unique device for applying penetrant liquid before textile printing. Thanks to the dimensions of the area it is capable of apply liquid (40x60 cm) is especially suitable for DTG printers M2, M3, M4, but of course also for printers with a smaller printing area flat, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only small area, e.g. when printing logos on hearts). Spraying time of full area 40x60 - 4.5 seconds. Optional spray size liquids of 2 cm each (2 - 60 cm length). Large clear LCD display. 5 storable positions/area and quantity settings injection. High efficiency and productivity of work.

It does not need a compressor

* The machine has 4 independently adjustable nozzles (you can apply only a small area, e.g. when printing logos on hearts)

* Spraying time of full area 40x60 - 4.5 seconds

* Optional liquid injection size of 2 cm (2 - 60 cm length)

* Large clear LCD display

* 5 storable positions/area settings and spray amount

* High efficiency and productivity of work

PRETREATmaker IV is a top-of-the-line device designed for the professional application of penetrating liquid to textiles. It has an advanced electronic system, which enables high performance and easier control during the textile pretreatment process. Clear color touch screen allows you to easily adjust the length and width of the spray and to easily adjust the spray volume. The device is equipped four nozzles, each of which can be switched on individually. This allows you to precisely adjust the area to apply the penetrating solution (Dupont Artistri, Image Armor, Brother...) but also saves a lot of penetration compared to applying by hand with a pressure/air gun. The length of the spray area can be regulated in 2 cm increments, using the touch screen. To set the amount of penetration liquid application, 10 values are available. Pre-treat maker IV also has an automated cleaning process for the spray nozzles (consumption approx. 12 ml per hour), which keeps nozzles through and prevents them from drying out or blocking.

Spray area: 40 x 60 cm

Spray method: Nozzles move above the table (inside)

Table length: 80 cm

Nozzles: 4 pieces

Dimensions: T 90 x W 72 x H 48 cm

Dimensions (for transport): T 95 x W 80 x H 61 cm

Weight: 68 kg

Weight (for transport): 86 kg

Connection: 220/230 or 110/120 VAC (automatic switch)

Consumption: 150 W

Operating pressure (before coating): max. 7 bar

Menu: 5 languages: German, English, French, Italian, Polish

Measurement: "cm" or "inch"

Included in delivery: spare nozzle, spare filter and ultrasonic clean...