Flywheels

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20325H00090, Year of construction: 2017, operating hours: 1,432 h, load capacity: 1,400 kg, lifting height: 2,850 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, fork width: 560 mm, TECHNICAL DETAILS Lift height: 2,850 mm Dcedeyx Thlopfx Ahuof Load capacity: 1,400 kg Overall height: 1,990 mm Fork length: 1,150 mm Fork width: 560 mm MACHINE DETAILS Mast type: Duplex Power type: electric Battery capacity: 250 Ah Battery voltage: 24 V Year of battery manufacture: 2017 Dimensions & Weight Dimensions (L x W x H): 1,950 mm x 820 mm x 1,930 mm Weight: 1,250 kg Operating hours: 1,432 h EQUIPMENT Non-marking tyres CE marking Transport packages Documentation Charger

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20331J00394, Year of construction: 2018, operating hours: 2,690 h, load capacity: 2,000 kg, lifting height: 3,590 mm, mast type: duplex, fork length: 1,150 mm, fork width: 570 mm, TECHNICAL DETAILS Lifting height: 3,590 mm Lifting capacity: 2,000 kg Fork length: 1,150 mm Fork width: 570 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery type: 3 PzS375 Year of battery manufacture: 2018 Battery capacity: 375 Ah Battery voltage: 24 V Dimensions & Weight Dimensions (L x W x H): 2,080 mm x 820 mm x 2,370 mm Weight: 1,630 kg Operating hours: 2,690 h EQUIPMENT Documentation Dcedpfxeyx S U Dj Ahuof CE marking Charger

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 13,109 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,700 mm, mast type: triplex, fork length: 1,140 mm, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lift height: 4,800 mm Free lift: 1,700 mm Overall height: 2,140 mm Fork length: 1,140 mm Maximum fork width: 940 mm Minimum fork width: 250 mm MACHINE DETAILS Mast: Triplex Dcodeyx S Ttopfx Ahujf Number of wheels: 3 Dimensions & Weight Dimensions (L x W x H): 3,041 mm x 1,060 mm x 2,140 mm Unladen weight: 3,300 kg Battery type: 5 PZS 625 Battery year: 2017 Capacity: 625 Ah Battery voltage: 48 V Operating hours: 13,109 h EQUIPMENT Attachment: 4th valve to fork carriage, side shift CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 702563, Year of construction: 2007, operating hours: 7,720 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,280 mm, fuel type: gas, mast type: triplex, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 6,500 mm Free lift: 2,280 mm Overall height: 3,100 mm Fork dimensions: 1,190 mm x 1,100 mm Minimum fork width: 250 mm MACHINE DETAILS Mast: Triplex Fuel type: LPG Dimensions (L x W x H): 2,830 mm x 1,240 mm x 3,110 mm Djdpfeyx S Sisx Ahuocf Number of wheels: 4 Engine brand: Nissan Operating hours: 7,720 h EQUIPMENT Side shift Work lights Half cabin Free lift

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329V00442, Year of construction: 2019, operating hours: 9,813 h, load capacity: 5,000 kg, lifting height: 4,470 mm, fuel type: electric, mast type: duplex, fork length: 1,400 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lifting height: 4,470 mm Clearance height: 3,000 mm Fork dimensions: 1,400 x 1,870 mm Minimum fork width: 560 mm MACHINE DETAILS Mast: Duplex Fuel type: Electric Dimensions & Weight Dimensions (L x W x H): 2,890 x 1,390 x 3,010 mm Weight: 7,000 kg Number of wheels: 4 Capacity: 930 Ah Battery voltage: 80 V Battery test result: 66% Operating hours: 9,813 h EQUIPMENT Side shift Fork adjustment Half-cab Work lights License plate Dsdpfxeyx S Rro Ahuscf Charger

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2X396C50046, Year of construction: 2012, operating hours: 15,892 h, load capacity: 8,000 kg, lifting height: 4,900 mm, fuel type: diesel, mast type: duplex, fork length: 1,490 mm, TECHNICAL DETAILS Load capacity: 8,000 kg Lift height: 4,900 mm Overall height: 3,550 mm Fork dimensions: 1,490 mm x 2,120 mm Maximum fork width: 2,120 mm Minimum fork width: 310 mm MACHINE DETAILS Dedpfoyx S Nnex Ahujcf Number of wheels: 6 Mast: Duplex Engine manufacturer: Deutz Dimensions & Weight Dimensions (L x W x H): 3,380 mm x 2,260 mm x 3,550 mm Weight: 12,600 kg Drive: Diesel Operating hours: 15,892 h EQUIPMENT 3rd + 4th valve for fork carriage Radio Heater Full cabin Work lights CE marking Documentation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Dodpfxoyx Anns Ahujcf Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Drain valves and level sensors Electronic control system Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, grinding diameter: 250 mm, overall weight: 3,900 kg, grinding wheel speed: 2,640 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 750 mm Grinding wheel diameter: 400 mm Max. workpiece diameter: 250 mm Grinding wheel speed: 2,140 / 2,640 rpm MACHINE DETAILS Operating voltage: 400 V Operating current: 16 A Frequency: 50 Hz Apparent power: 9.8 kVA Dsdpfx Aeyxpclshuecf Grinding spindle motor power: 5 kW Dimensions & Weight Dimensions (L x W x H): 1,950 x 2,750 x 1,750 mm Machine weight: 3,900 kg EQUIPMENT Filter unit Tailstock suitable for external cylindrical grinding

Condition: used, functionality: unexamined, machine/vehicle number: W4X133Y01284, Year of construction: 2021, operating hours: 5,829 h, load capacity: 1,200 kg, lifting height: 1,924 mm, construction height: 2,200 mm, fork length: 1,150 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Battery: 48V 375Ah, measured at 25.05 V Operating hours: 5,829 h Dcjdpfxjyxcb Ue Ahusf EQUIPMENT Initial lift – lifts 2 pallets simultaneously / good ground clearance for uneven surfaces Former Linde full-service machine All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY upon receipt of payment confirmation email! Collection WITHOUT appointment Monday to Friday 7:00–16:30. A mast that is too high can be dismantled for transport upon request. If machines are not collected within the agreed deadline, a storage fee of €20 per machine per day will apply (the balance must be settled before collection).

Condition: used, functionality: unexamined, machine/vehicle number: W4X133Y01285, Year of construction: 2021, operating hours: 5,607 h, load capacity: 1,200 kg, lifting height: 1,924 mm, fuel type: electric, construction height: 2,200 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! Dcjdpeyxcawjfx Ahuef TECHNICAL DETAILS Load capacity: 1,200 kg Lift height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Standard Drive: Electric Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Battery: 44/2023 48V 375Ah, very good performance measured at 25.4V Operating hours: 5,607 h FEATURES Former Linde full-service unit Initial lift – capable of lifting 2 pallets simultaneously Good ground clearance for uneven surfaces All measurements are rounded values. No liability accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00–16:30. A mast that is too tall can be dismantled for transport on request. In case of late collection, a storage fee of €20 per machine per day applies (payment must be settled before collection).