Screw conveyor in special design

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, No minimum price – guaranteed sale to the highest bidder! Auction of two ABB IRB 360 (Flexpicker) robots including vision system! TECHNICAL DETAILS Payload: 3 kg Working area diameter: 1,130 mm Positional repeatability: 0.03–0.1 mm Gbsdsznh T Espfx Ahtjr Path repeatability: 0.1–0.33 mm MACHINE DETAILS Weight: 120 kg Supply voltage: 200–600 V Supply frequency: 60 Hz Power consumption at maximum load: 0.477 kW Payload for pick-and-place cycle: 1 kg Ambient temperature: 0 to +45 °C Relative humidity: max. 95 % Noise level: < 70 dB(A) Emissions: EMC/EMI shielded Operating hours: 6,000 h

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 12 kg, arm reach: 1,850 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12 kg Reach: 1,850 mm Godpfoznh Tfex Ahtobr MACHINE DETAILS Operating hours: 6,000 h Scope of delivery: Robot + Controller + Control cabinet + Flex pendant and ProfiNet I/O Slave software

Condition: ready for operation (used), Year of construction: 2018, operating hours: 225 h, functionality: fully functional, overall weight: 160 kg, load capacity: 10 kg, arm reach: 1,420 mm, repeat accuracy: 0.04 mm, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a ProModulR cell! TECHNICAL DETAILS Reach: max. 1,420 mm Rated payload: 10 kg Rated additional load, carousel: 0 kg Rated additional load, swing arm: 0 kg Rated additional load, arm: 10 kg Rated total load: 20 kg Positional repeatability according to ISO 9283: ± 0.04 mm Number of axes: 6 Mounting area: 333.5 mm × 307 mm Range of motion A1: ± 170° Range of motion A2: -185° / +65° Range of motion A3: -137° / +163° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° Axis speed A1: 220 °/s Axis speed A2: 210 °/s Axis speed A3: 270 °/s Axis speed A4: 381 °/s Axis speed A5: 311 °/s Axis speed A6: 492 °/s MACHINE DETAILS Protection class according to IEC 60529: IP65 Protection class robot hand according to IEC 60529: IP67 Gbjdpfjznh Snjx Ahtsr Ambient temperature during operation: 5 °C to 45 °C Ambient temperature during operation: 278 K to 318 K Mounting positions: Floor Ceiling Wall Any angle Weight: approx. 160 kg Operating hours: 225 h

Condition: ready for operation (used), Year of construction: 2020, operating hours: 26,600 h, functionality: fully functional, machine/vehicle number: 1026106, overall weight: 57 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller model: KR C4 compact, repeat accuracy: 0.02 mm, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a testing facility. TECHNICAL DETAILS Maximum reach: 1,101 mm Maximum payload: 10.9 kg Repeatability according to ISO 9283: ± 0.02 mm Number of axes: 6 Range of motion A1: ± 170° Range of motion A2: -190° / +45° Range of motion A3: -120° / +156° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° MACHINE DETAILS Gsdpfx Aoznh Rqjhtobr Controller: KR C4 compact Teach pendant: KUKA smartPAD Cycle rate: 140 cycles/min Movement sequence: 25 mm / 305 mm / 25 mm Test load: 1 kg Ambient temperature during operation: 0 °C to 45 °C Protection class according to IEC 60529: IP65 / IP67 Protection class in series according to IEC 60529: IP65 / IP67 Dimensions and weight Base area: 208 mm × 208 mm Weight: approx. 56.5 kg Mounting positions Floor Ceiling Wall Any angle Operating hours: 26,600 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30S00738, Year of construction: 2013, operating hours: 8,506 h, load capacity: 7,000 kg, lifting height: 4,450 mm, construction height: 3,300 mm, fork length: 1,200 mm, empty load weight: 10,410 kg, TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,450 mm Overall height: 3,300 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W x H): 3,550 x 1,980 x 3,300 mm Dead weight: 10,410 kg Gbedpfx Ahozmwmljter Transmission: Automatic Front tires: Superelastic Rear tires: Superelastic Operating hours: 8,506 h EQUIPMENT 3rd valve 4th valve Full cabin Cabin heater Hydraulic line preparation

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Gbedpfx Ajzmwcashtor Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following components of the machine have been renewed: Gsdpfxezl Srae Ahtjbr Festo pneumatic system Brand new Labod control system Replacement of the Y-axis bearings TECHNICAL DETAILS Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min EQUIPMENT BOSCHERT software Note: The machine has already been disassembled.

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). Godpfx Ajzlxiljhtjbr TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Gjdpozrgh Aefx Ahtsbr Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Fork length: 1,800 mm Fork width: 150 mm Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Dimensions and weight Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,300 kg, power: 2 kW (2.72 HP), controller model: HBG 10, workpiece length (max.): 3,000 mm, bar passage: 60 mm, TECHNICAL DETAILS Workpiece length, max.: 3,000 mm Guide channel diameter: approx. 60 mm MACHINE DETAILS Control panel: HBG 10 Gbedpfozqcv Tjx Ahtjr Drive power: 2 kW Weight: 1,300 kg