Box tipper

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min MACHINE DETAILS Control: Siemens - PLC control Hsdpfx Aaeygim Escsnh Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert

Condition: new, machine/vehicle number: 1900040028, conveyor belt length: 1,700 mm, conveyor belt width: 440 mm, conveyor belt speed: 57 mm/s, power: 0.18 kW (0.24 HP), input voltage: 230 V, input frequency: 50 Hz, Conveyor belt in front 1,700 x 440 mm Hodpetv E Diofx Aaconh FDA compliant

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 420 kg, arm reach: 3,326 mm, controller model: KRC2 ed05, repeat accuracy: 0.06 mm, number of axes: 6, Auction of a set consisting of 1x KUKA KR500 L340-2 & 1x KUKA KR500 L420-2! TECHNICAL DETAILS Rated payload KR500 L340-2: 340 kg Rated payload KR500 L420-2: 420 kg Hnsdeygia Sepfx Aacsh Reach KR500 L340-2 max.: 3,326 mm Reach KR500 L420-2 max.: 3,076 mm Repeatability (ISO 9283): ±0.06 mm Range of motion A1: ±185° A2: -40° / +110° A3: -184° / +60° A4: ±350° A5: ±118° A6: ±350° Speed at rated payload A1: 69 °/s A2: 69 °/s A3: 69 °/s A4: 77 °/s A5: 76 °/s A6: 120 °/s MACHINE DETAILS Controller: KRC2 ed05 Number of axes: 6 Mounting position: Floor Ambient temperature (storage/transport): -40 °C to 60 °C EQUIPMENT Manipulator KRC2 ed05 control cabinet Complete cable set Teach pendant

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Hodpfjyf Hfpex Aacjnh Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: excellent (used), Year of construction: 2016, FAM Lifis 2 V-belt Slicer Hnsdpfx Aaexw Ulteceh High-performing V-belt slicer for larger diameter products. The Lifis 2 is designed for uniform crosscut slicing of leafy-type vegetables and long-shaped products at high production outputs. It offers food processors precision cutting along with substantial savings in production time and product waste. Its clean cut quality leads to longer product shelf life for fresh-sliced products. The Lifis.2 can be supplied with a large number of interchangeable cutting wheels offering maximum flexibility in cut sizes and types (flat slice, crinkle slice, square pieces etc.). Applications The Lifis.2 accepts products up to a size of 220 mm (8 21/32”) for compressible leafy-type vegetables. It is particularly suitable for gentle cutting of all types of lettuce (romaine, radicchio, oak, gem, etc.) and spinach. Pre-cutting may be necessary for some large products. It also handles both round and elongated firm products such as celery, rhubarb, zucchini, iceberg, and cabbage heads up to 180 mm (7 3/32”) in diameter. CUT SHAPES & SIZES Cut shapes: Flat cut slices, shreds and stamps (rectangular slices) Cut sizes: Various cut sizes possible from 2mm up to 38mm for firm products and up to 80mm for leafy vegetables Capacity in kg/h: Up to 9.000 kg/h, depending on product, cutting size and Manufacturer: FAM Model: Lifis 2 Year: 2016 Max. product input size solid products: Diameter 180mm Max. product input size compressible products: Diameter 220mm Capacity: Up to 9.000 kg/h (depends on product) Power: 4kW / 50Hz / 400V Machine Dimensions LxWxH: 343x106x147 cm Machine Weight: 650 kg.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Hnsdpfxsyf E D Rj Aacsh Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0505-V00-003, load capacity: 80 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 80 kg Lift (arms): 1,500 mm Hedpfx Ajyfu Rgeaconh EQUIPMENT 1 magazine (20 pallets) 20 pallets, System 3R GPS 240 Clamping plate 20-M10 Modular SPREITZER clamping block/fixed block unit Set-up station with pneumatic swing clamp Zero-point clamping system System 3R GPS 240

Year of construction: 2020, operating hours: 13 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 623, Almost unused Urschel Tanslicer machine. We used it for slicing bread chips, but it can also be used for slicing vegetables, cucumbers, etc. It looks brand new. Originally purchased from Urschel Switzerland. Blades can be exchanged. Hnjdpfxow Afvcj Aacoh

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1412-V00-288, load capacity: 50 kg, stroke length: 1,450 mm, TECHNICAL DETAILS Transfer weight: 50 kg Stroke (arm): 1,450 mm Magazine: 60 pallets EQUIPMENT Sliding plate for WorkPal 23 pallets, System 3R Macro 70 Mechanical centric vises Hedpfx Aoyfu D Hsacjnh SPREITZER MZQ 110-60 PA

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Hedpfeyfuwgex Aacjnh Transfer weight: 150 kg Lift (arms): 1,500 mm MACHINE DETAILS Number of magazines: 2 Capacity per magazine: 12 pallets EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZS 260-125 A 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZU 170-60 Zero-point clamping system System 3R GPS 240

Condition: excellent (used), functionality: fully functional, Tipper for pallet boxes Hnodpfew Iv U Ejx Aacsh Dimensions: 1700x1350x2100 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Hedpjyfuq Tjfx Aaconh Automation interface Automatic side door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 Hjdpfxjyfum Uo Aaconh MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2014, We offer an industrial FAM WRIGHTFIELD GD 500 dicer from 2014 – an efficient machine for dicing vegetables, fruit, meat, cheese and other food products into slices, cubes or strips. The dicer is ideal for food processing plants, in the production of frozen foods, ready meals, salads, vegetable and meat mixes, marinated, fried or cooked products, ensuring high cutting repeatability. Food dicer, designed to cut and chop a variety of products, from boneless meat to mushroom protein, are engineered to maximise efficiency while maintaining the strictest hygiene standards. The dicer can be loaded and unloaded manually or, more commonly, using feed and discharge conveyors. All areas that need to be accessed for regular maintenance are secured with quick-release couplings. The entire cutting head assembly is also quick-release, allowing for quick tool changes to suit the required cutting operations. Technical data: Manufacturer: FAM WRIGHTFIELD Model: GD Type: 500 Year of manufacture: 2014 Hodjx H Rqgjpfx Aacjnh Power: 2.2 kW Power supply: 400 V, 50 Hz, 3~ 4.6 A Weight: 780 kg Machine dimensions (L x W x H): 2800 x 1000 x 1650 mm Advantages: Suitable for cutting of fragile and fibrous products with perfect cut quality and a minimum of slivering and fines. Product isn’t accelerated or crushed, dicer operates through a guillotine cutting principle. Designed for continuous production in a fully integrated line. Covers and cutting head are quickly dismantled for cleaning All stainless steel or USDA / FDA approved polymeric materials in food contact areas Wide operating range – the food dicer can process lightly frozen, marinated , fried or cooked products (even when still hot). No extra cutting tools are necessary to change from one cutting size to another

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,774 h, functionality: fully functional, turning length: 452 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, swing diameter over bed slide: 700 mm, TECHNICAL DETAILS Turning diameter: 230/300 mm Turning length: 452 mm Maximum swing over bed: 700 mm Spindle bore: 65 mm Spindle speed: 4,500 rpm Spindle motor: 15/11 kW Max. spindle torque: 179 Nm Number of tools in turret: 12 BMT 55 Live stations: 12 BMT 55 Live tool speed: 5,000 rpm Milling spindle drive: 5.6/3.7 kW Y-axis: ±60 mm Sub-spindle power: 7.4/4.9 kW Sub-spindle speed: 6,000 rpm Rapid traverse: 36/36/10 m/min MACHINE DETAILS Control: Fanuc Dimensions (L x W x H): 3.9 x 1.65 x 2.0 m Machine weight: approx. 4,700 kg Main spindle chuck diameter: 210 mm Sub-spindle chuck diameter: 125 mm Hedpfoyfnc Nex Aacenh EQUIPMENT Automatic tool measurement Q-Setter Chip conveyor Parts catcher with box 2 live tools BMT 55 Set of standard tools CNC turning center with live tooling, Y-axis, and sub-spindle.