Inclined conveyor / transverse conveyor, 4-strand

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Knsdpfx Aeztazfjndea Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: excellent (used), functionality: fully functional, Möhringer log and cant feeder, for singling and allocating round timber and cants to the carriage. Optimal separation even for different diameters. Complete with hydraulic unit and solenoid valves. Little use, from a small joinery workshop. Dismantled and loaded free on truck. Kodjyfv A Rspfx Andena

Condition: new, functionality: fully functional, empty load weight: 3,200 kg, lifting height: 3,270 mm, Year of construction: 2026, operating hours: 1 h, load capacity: 800 kg, machine/vehicle number: 250815, The machine is new and unused! TECHNICAL DETAILS Lifting height: 3,270 mm Load capacity: 800 kg Bucket capacity: 0.38 m³ MACHINE DETAILS Dimensions & Weight Kedjzr D Uyspfx Andona Dimensions (L x W x H): 4,706 x 1,570 x 2,480 mm Weight: 3,200 kg Tire size: 31 × 15.5 × 15 Engine manufacturer: Changchai Engine type: ZN390BT-25G Engine power: 18.4 kW Number of cylinders: 3 Fuel type: Diesel Emission standard: Euro 5 Fuel tank: 70 l Recorded operating hours: 1 h EQUIPMENT Quick coupler Lifting lock Cabin with heating Digging bucket with teeth Fabric seat CE certification

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1307.1986-2025/17-047, empty load weight: 1,580 kg, usable tank capacity: 240 l, water tank capacity: 200 l, The machine is unused! The machine is in a large wooden crate! TECHNICAL DETAILS Waste container volume: 240 l Water tank volume: 200 l Cleaning width: 1,900 - 2,100 mm Main brush motor power: 2 × 800 W Side brush motor power: 4 × 90 W Suction turbine motor power: 2 × 50 W Drive motor power: 500 W Filter shaker motor power: 2 × 50 W Climbing ability: 25 % Anti-slip control: Yes MACHINE DETAILS Battery voltage: 48 V Battery capacity: 300 Ah Knodpfx Ajzr D S Ejndja Operating time: 4–6 h Charging time: approx. 6.5 h Weight: 1,580 kg EQUIPMENT Mirrors Fan Rear view camera High-pressure cleaner Emergency stop switch Toolbox Lighting Direction indicator Pneumatic tires

Condition: used, Year of construction: 1994, Esterer singulator 8-lane (8 conveyor chains) Kedpfx Ansygfkgedsna 2-stage singulator Length: approx. 5 meters Width: approx. 1.5 meters Height: approx. 1.6 meters Location: Austria, near Wiener Neustadt

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: 03340989, load capacity: 240 kg, platform length: 1,280 mm, platform width: 760 mm, construction height: 3,900 mm, Like-new machine with only one operating hour! TECHNICAL DETAILS Working height: approx. 5,900 mm Platform height: 3,900 mm Platform dimensions (L × W × H): 1,280 × 760 × 1,100 mm Platform load capacity: 240 kg Maximum number of persons: 2 MACHINE DETAILS Kjdpszr D Ndjfx Andsna Battery voltage: 24 V Battery capacity: 114 Ah Drive type: Electric Motor power: 0.8 kW Travel speed: 3 km/h Drive: 2WD Dimensions & Weight Overall dimensions (L × W × H): 1,490 × 760 × 2,030 mm Dead weight: 930 kg Operating hours: 1 h EQUIPMENT Power outlet on the platform Self-Lock system Non-marking tires Forklift pockets CE certified

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Knsdpfx Anezrl H Redea Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Ksdszrf Nrepfx Andsna Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Supply voltage: 400 V Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe Knsdpfxsztb Ims Andsa

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40% duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Knsdpfxeztb Adj Andea Control: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic sub-collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with reference speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale at the highest bid! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Kodpszr H Ebefx Andona Suitable for elastomer compounds for low, medium, and high-voltage cables TECHNICAL DETAILS Screw diameter: 200 mm MACHINE DETAILS Drive power: 72.5 kW EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing purposes

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die Knjdpfx Anjzr Hz Ajdja