Steel feed bunker

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Hnedsygim Espfx Aaceh Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min MACHINE DETAILS Control: Siemens - PLC control Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 420 kg, arm reach: 3,326 mm, controller model: KRC2 ed05, repeat accuracy: 0.06 mm, number of axes: 6, Auction of a set consisting of 1x KUKA KR500 L340-2 & 1x KUKA KR500 L420-2! TECHNICAL DETAILS Rated payload KR500 L340-2: 340 kg Rated payload KR500 L420-2: 420 kg Reach KR500 L340-2 max.: 3,326 mm Reach KR500 L420-2 max.: 3,076 mm Repeatability (ISO 9283): ±0.06 mm Range of motion A1: ±185° A2: -40° / +110° A3: -184° / +60° A4: ±350° A5: ±118° A6: ±350° Speed at rated payload A1: 69 °/s A2: 69 °/s A3: 69 °/s A4: 77 °/s A5: 76 °/s A6: 120 °/s MACHINE DETAILS Controller: KRC2 ed05 Number of axes: 6 Hnsdjygia Sspfx Aaceh Mounting position: Floor Ambient temperature (storage/transport): -40 °C to 60 °C EQUIPMENT Manipulator KRC2 ed05 control cabinet Complete cable set Teach pendant

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Hjdpfsyf Hfpjx Aacsnh Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Hsdpoyf E D Rsfx Aacjnh Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0505-V00-003, load capacity: 80 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 80 kg Hnedpfsyfu Rgjx Aacsh Lift (arms): 1,500 mm EQUIPMENT 1 magazine (20 pallets) 20 pallets, System 3R GPS 240 Clamping plate 20-M10 Modular SPREITZER clamping block/fixed block unit Set-up station with pneumatic swing clamp Zero-point clamping system System 3R GPS 240

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1412-V00-288, load capacity: 50 kg, stroke length: 1,450 mm, TECHNICAL DETAILS Transfer weight: 50 kg Stroke (arm): 1,450 mm Magazine: 60 pallets EQUIPMENT Hnsdoyfu D Hepfx Aacjh Sliding plate for WorkPal 23 pallets, System 3R Macro 70 Mechanical centric vises SPREITZER MZQ 110-60 PA

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 150 kg Lift (arms): 1,500 mm MACHINE DETAILS Number of magazines: 2 Capacity per magazine: 12 pallets EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZS 260-125 A 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZU 170-60 Zero-point clamping system System 3R GPS 240 Hnsdpfx Aajyfuwgecsh

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Hodpjyfuq Tefx Aacsnh Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS Hsdjyfum Uepfx Aaconh X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,774 h, functionality: fully functional, turning length: 452 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, swing diameter over bed slide: 700 mm, TECHNICAL DETAILS Turning diameter: 230/300 mm Turning length: 452 mm Maximum swing over bed: 700 mm Spindle bore: 65 mm Spindle speed: 4,500 rpm Spindle motor: 15/11 kW Max. spindle torque: 179 Nm Number of tools in turret: 12 BMT 55 Live stations: 12 BMT 55 Live tool speed: 5,000 rpm Milling spindle drive: 5.6/3.7 kW Y-axis: ±60 mm Sub-spindle power: 7.4/4.9 kW Sub-spindle speed: 6,000 rpm Rapid traverse: 36/36/10 m/min MACHINE DETAILS Control: Fanuc Dimensions (L x W x H): 3.9 x 1.65 x 2.0 m Machine weight: approx. 4,700 kg Main spindle chuck diameter: 210 mm Sub-spindle chuck diameter: 125 mm EQUIPMENT Automatic tool measurement Q-Setter Chip conveyor Parts catcher with box 2 live tools BMT 55 Set of standard tools CNC turning center with live tooling, Y-axis, and sub-spindle. Hnedpfx Ajyfnc Noacoh