Stainless steel tank 51.4 cbm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,286 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 35 m/min, Submitting a bid constitutes an obligation to collect the item on time on 21.04.2026! Within Europe, the disassembly team can also reassemble the system directly at the buyer’s site afterwards (Estimate: approx. 20,000 EUR, approx. 15 working days required). Gisdpfeyzrvtsx Af Esr 5-axis simultaneous milling with Heidenhain iTNC 530 control! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feed rate: 35,000 mm/min MACHINE DETAILS Control manufacturer: Heidenhain iTNC 530 Tool magazine: 40 stations Electrical Data Supply voltage: 400 V AC Frequency: 50 Hz Current consumption: 116 A Total installed power: 69 kW Operating hours Program run time: 23,286 h Machine on hours: 51,450 h Control on hours: 70,739 h EQUIPMENT Measuring probe Note: Further technical specifications of the machine can be found in the attached data sheet.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, Placing a bid obligates you to collect the item on time on 21.04.2026! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 600 mm Travel Z-axis: 510 mm Table size: 1,300 x 600 mm Gisdpfxoyzhnfo Af Eer T-slots: 6 (size 18) Max. table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 stations MACHINE DETAILS Drive power: 10 / 17 kW Through-spindle coolant (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Total machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! Gijdpfjyx Tzrjx Af Esr EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 Gjdpfxeyx Ia Ns Af Ejir MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P21120J00444, Year of construction: 2018, operating hours: 4,123 h, load capacity: 1,600 kg, lifting height: 4,660 mm, free lift: 1,286 mm, mast type: triplex, DGUV certified until: 02/2027, Equipment: UVV, Service + UVV until 02/2027 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lift height: 4,660 mm Build height: 2,135 mm Free lift: 1,286 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery: 48V 4PzS 560Ah, very good performance measured at 49.9 V Godpfxjyx Hfks Af Eeir Operating hours: 4,123 h EQUIPMENT Ex-Linde full-service machine UVV valid until 02/2027 Next service due 02/2027 or after 1,000 operating hours All dimensions are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on-site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. A mast that is too tall for transport can be disassembled upon request. A storage fee of €20 per machine per day applies for late collection (payable before pick-up).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: P21120H04010, Year of construction: 2017, operating hours: 4,790 h, load capacity: 1,600 kg, lifting height: 5,455 mm, free lift: 1,500 mm, construction height: 2,480 mm, Service + UVV valid until 03/2027 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,455 mm Overall height: 2,480 mm Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex with full free lift Battery capacity: 700 Ah Voltage: 48 V Operating hours: 4,790 h EQUIPMENT Former Linde full-service unit Service + UVV valid until 03/2027 3rd + 4th valve Side shifter Gijdpfx Afjyx Hdtj Esr Telescopic forks 115–240 cm Roof window Rear-view camera Integrated scale All measurements are approximate. No liability is accepted for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with a large forklift at your own risk. Collection ONLY with an email confirming payment! Collection WITHOUT appointment Monday to Friday from 7:00 to 16:30. An excessively tall mast can be dismantled for transport upon request. For late collection, a storage fee of €20 per machine per day will be charged (must be paid before collection).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X394V04346, Year of construction: 2019, operating hours: 16,716 h, load capacity: 5,000 kg, lifting height: 4,225 mm, free lift: 1,360 mm, mast type: triplex, construction height: 2,376 mm, Service + UVV 01/2027, 3rd, 4th, and 5th valve No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Giodpjyx Hbrofx Af Eer Load capacity: 5,000 kg Lift height: 4,225 mm Overall height: 2,376 mm Free lift: 1,360 mm MACHINE DETAILS Mast type: Triplex Drive: Diesel Battery type: 12 V starter battery Operating hours: 16,716 h EQUIPMENT Former Linde full-service unit Service + UVV valid until 01/2027 3rd, 4th, and 5th hydraulic valve Fork positioner Side shifter Hydraulic telescopic forks 1,350–2,350 mm Full cabin with heater and windscreen wiper Air conditioning and cabin heater with front window defroster function Digital radio / DAB+ / CD / USB / BT Exterior mirrors left and right Clipboard with LED lighting Sun blind roller for roof and front Road lighting compliant with StVZO Linde SpeedAssist, driving assistance for automatic speed adjustment indoors and outdoors, indoor speed limit to 6 km/h All dimensions are rounded. No liability is accepted for typing or measurement errors. PICK-UP CONDITIONS Side loading up to 5 t possible with large forklift on site at your own risk. Pick-up ONLY with email confirmation of payment! Collection WITHOUT prior appointment Monday to Friday 7:00–16:30. An overly tall mast can be dismantled for transport upon request. If collection is delayed, a storage fee of €20 per day, per machine, will be charged (the balance must be settled before collection).

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: K 240/50 662, turning height: 2,150 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled between 2012 and 2016! 2012: - Digital measuring system (Positip 880) installed - New power clamping band - New selector switches 2015: - Directional clutches on the X-axis replaced - Gibs and nuts on both supports re-adjusted 2016: - All clutches in the main drive re-ground - All bearings in the main drive replaced, including the power supply unit - Drive shaft replaced - Several sets of discs - New spur gear, etc. TECHNICAL DETAILS Turning height: 2,150 mm Swing diameter: 2,200 mm Faceplate diameter: 2,000 mm Gijdjyw N Ufopfx Af Esr Max. workpiece weight: 20,000 kg X-axis travel: 1,225 mm Rapid traverse X-axis: 2 m/min Rapid traverse Z-axis: 2 m/min Spindle speed: 3 – 125 rpm MACHINE DETAILS Number of tool turrets: 1 Total weight: 26,000 kg EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 2,300 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Workpiece weight (max.): 2,000 kg Table width: 630 mm Table length: 800 mm Spindle speed: 10 - 2,300 rpm Spindle motor power: 22,000 W Number of spindles: 1 Giedpfxeyw N Sqe Af Eer Number of tool magazine slots: 161 MACHINE DETAILS Control: Siemens Sinumerik System 800 - 840C Total weight: 24,000 kg EQUIPMENT Documentation/manual Infinitely variable speed control Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Giodpfxeyw N Ire Af Eer Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.