Double scissor lift table, load capacity 2000 kg – 1 unit

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Kedpfx Aez I Tt Ijhijnc Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Kodpsz I S Uwsfx Ahisnc Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical Data Charging voltage: 80 V Charging current: 280 A Charger type: Modular HF charger General Data Manufacturer: Hawker Model: Life SeediQ Year of manufacture: 2019 Application: Forklifts / Electric forklifts Knodpfx Ahez R Rizsijc MACHINE DETAILS Dimensions Length: 600 mm Width: 600 mm Height: 800 mm Weight Net weight: 80 kg EQUIPMENT Battery connector Wall connector All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the item is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3758

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Data Year of manufacture: 2019 Manufacturer: Hawker Type: Life SeediQ Output voltage: 80 V Charging current: 280 A Design: Modular HF charger MACHINE DETAILS Dimensions and Weight Length: 600 mm Width: 600 mm Height: 800 mm Weight: 80 kg Knsdsz R Rh Dspfx Ahiec EQUIPMENT Battery connector Wall connector All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3757

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kedpfsz R Rhqsx Ahienc Battery Manufacturer: Still Type: 24 V 4 PzS 620 Ah Battery voltage: 24 V Capacity: 620 Ah Year of manufacture: 2022 MACHINE DETAILS Dimensions and weight Overall length: 800 mm Overall width: 300 mm Overall height: 800 mm Net weight: 500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1171

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mounting FEM class: FEM 3 Load capacity Load capacity: 3,000 kg Suitable for forklifts with a load capacity of: 3,000–5,000 kg Forks Fork type: Hydraulic telescopic forks / push forks Fork length: 1,350–2,350 mm MACHINE DETAILS Origin Previously mounted on: Linde H30 Year of manufacture: 2021 Dimensions and weight Overall length: 1,350 mm Overall width: 800 mm Overall height: 1,000 mm Self-weight: 200 kg EQUIPMENT Hydraulic telescopic forks / push forks All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Kedpfjz R Rgtex Ahionc Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1169

Operating hours: 4,123 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Kodpjz R D Ddsfx Ahionc Mast type: Triplex mast with full free lift Lifting height: 4,660 mm Free lift: available Load capacity Rated load capacity: 1,600 kg Forks Fork length: 1,150 mm Side shifter: available Hydraulically adjustable forks: not available Drive and battery Drive type: Electric Battery: 48 V, 4 PzS, 560 Ah Battery year of manufacture: Battery voltage at rest: 49.9 V MACHINE DETAILS General data Manufacturer: Linde Type: R16 Year of manufacture: 2018 Operating hours: 4,123 h Dimensions and weight Overall length: 2,500 mm Overall width: 1,260 mm Overall height: 2,135 mm Own weight: 3,000 kg Inspections and service Service valid until: UVV (German industrial safety) valid until: EQUIPMENT Triplex mast with full free lift Side shifter Rear safety light Comfort seat Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tonnes is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 287

Operating hours: 12,341 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load Capacity Load capacity: 2,500 kg Mast Mast type: Triplex mast with full free lift Lifting height: 6,430 mm Free lift: available Drive and Battery Drive type: Electric Battery type: Lithium-ion Battery year of manufacture: 04/2019 Battery voltage: 90 V Battery capacity: 268 Ah Measured idle voltage: 95.3 V Hydraulics Hydraulic valves: 3rd and 4th valve Fork positioner: Multi-directional fork positioner Side shifter: available MACHINE DETAILS General Knedpjz R D A Tofx Ahisc Manufacturer: Linde Type: E25 Year of manufacture: 2019 Operating hours: 12,341 h Own weight: 5,300 kg Dimensions Overall length: 3,650 mm Overall width: 1,150 mm Overall height: 2,824 mm Inspections and Service Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 EQUIPMENT Full cabin without driver's door Heater Windshield wiper Tilt angle display White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Orange warning light Safety light (front) Safety light (rear) Rear view camera Comfort seat All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 254

Operating hours: 4,375 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Number of wheels: 3 Operating hours: 4,375 h MACHINE DETAILS Manufacturer: Linde Type: E16 Year of manufacture: 2020 Drive type: Electric Own weight: 3,500 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm Battery year of manufacture: Battery voltage: 48 V Battery capacity: 625 Ah Knjdpfsz R Dwwsx Ahijc Battery voltage at rest: 50.8 V Battery charger: Not available EQUIPMENT Side shifter 3rd hydraulic valve Full cabin Cabin heater Windshield wiper LED work light, front LED work light, rear Tilt angle display Service valid until: 12/2026 Safety inspection valid until: 12/2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 124

Operating hours: 12,512 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Manufacturer: Jungheinrich (?) Type: EFG S30 Drive type: Electric Load capacity: 3,000 kg Lifting height: 7,000 mm Mast type: Triplex mast Free lift: Full free lift Hydraulics: 3rd + 4th valve Fork length: 1,800 mm Battery voltage: 80 V Battery capacity: 775 Ah Battery type: 5 PzS Battery year of manufacture: 12/2024 Battery voltage at rest: 85.8 V Operating hours: 12,512 h MACHINE DETAILS Year of manufacture: 2015 Own weight: 5,900 kg Overall length: 4,300 mm Overall width: 1,300 mm Overall height: 3,100 mm Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Ksdpfx Ahjz R Drueisnc Hydraulic fork positioner Side shifter Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Road traffic lighting with turn signals Front camera Comfort seat Battery charger 80120, year of manufacture 2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: * Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. * Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Any outstanding storage fees must be paid in full before collection. Lot number: 48