Drip tray, 270 l, L1600 x W1200 x H140 mm – 1 unit

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Nledpfx Ane Ad N Dnjgsh Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Battery charger Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mounting FEM class: FEM 3 Load capacity Load capacity: 3,000 kg Suitable for forklifts with a load capacity of: 3,000–5,000 kg Forks Fork type: Hydraulic telescopic forks / push forks Fork length: 1,350–2,350 mm MACHINE DETAILS Origin Previously mounted on: Linde H30 Year of manufacture: 2021 Dimensions and weight Overall length: 1,350 mm Overall width: 800 mm Overall height: 1,000 mm Self-weight: 200 kg EQUIPMENT Hydraulic telescopic forks / push forks All dimensions are approximate. No guarantee is given for typographical or measurement errors. Nlsdpfx Aez R Rgtongjh Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1169

Condition: used, machine/vehicle number: H2X392X00473, Year of construction: 2020, operating hours: 7,569 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Self-weight: 3,895 kg Next service due in: 413 h UVV certificate valid until: 06/2027 Njdpsz Nyl Isfx Angslh Operating hours: 7,569 h EQUIPMENT 3rd valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Lumbar support Seat heating Display of tilt angle Previously a Linde full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 235

Condition: used, machine/vehicle number: H2X393V04185, Year of construction: 2019, operating hours: 14,576 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm MACHINE DETAILS Mast type: Duplex mast Lift type: Full free lift Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,250 x 2,441 mm Own weight: 4,665 kg UVV certificate valid until: 09/2027 Next service due in: 423 hours Operating hours: 14,576 hours EQUIPMENT Former Linde full-service unit 3rd hydraulic valve 4th hydraulic valve Side shifter Hydraulic telescopic forks Integrated scale Full cabin Air conditioning Heater Windshield wiper LED work light, front LED work light, rear Safety light, front Safety light, rear Nljdpsz Nxd Nsfx Angeh Safety light, side Rear view camera Comfort seat Lumbar support Seat heating LPG gas tank Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 171

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Nsdsz Nvqmjpfx Angolh Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: used, machine/vehicle number: H21202Y00369, Year of construction: 2021, operating hours: 16,945 h, load capacity: 3,500 kg, lifting height: 5,495 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,495 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Drive type: LPG UVV certificate valid until: 09/2027 Next service due in: 853 hours Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 3,424 mm Nedpfxsz Nn A Uo Angslh Own weight: 5,523 kg Operating hours: 16,945 h EQUIPMENT Facelift model Former Linde full-service unit Duplex free-lift mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning (AC) Cabin heater Windshield wiper LED work lights front and rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 40

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Nledpoz Ngbvjfx Angoh Control system Suitable for secondary shredding The seller has a suitable conveyor belt in stock as an optional extra.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables Nedpfoz Ngaxex Angolh TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Nodoz I Tt Ispfx Angslh Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT Nlsdsz I S Uwepfx Angoh CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain