Diesel Tank Tank conditioning filling station

Year of construction

2011

Condition

Ex-display machine

Location

Germany

Diesel Tank Tank conditioning filling station

Machine data

Machine type:: Diesel Tank Tank conditioning filling station

Machine number:: 10.000 Ltr

Year of construction:: 2011

Condition:: as good as new (ex-display)

Price & Location

Location:: D - Nordrhein-Westfalen

Call

Details about the offer

Listing ID:: A242-1820

Update:: 19.05.2026

Description

Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act

Dear Sir or Madam,

We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications:
Ledocl Sb Rspfx Amtjrp

Nominal capacity: 10 cbm
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL... as per your request.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate.

Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm).

Monitoring space of the double wall with leak detection fluid.

Container dimensions:
Length: approx. 5,350 mm plus 600 mm for diesel pump
Diameter: approx. 1,600 mm
Weight: approx. 2,000 kg

Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket.
- Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“)
- Suction pipe 1¼“
- Dipstick and dipstick closure – tank level indicator
- Vent pipe with cap 1 ½“
- Limit value sensor with type approval
- Leak detection device (optical) = LAS with leak detection fluid
- Access ladder for side mounting, supplied separately.

Tank approved for installation outside of earthquake/flood zones.

Diesel fuel dispenser with data recording
Type: HDM80eco LTE
Flow rate: 75 l/min
Cloud-based basic module free of charge
You can see who, when, where, and how much fuel was dispensed.
Fueling is done via tank key or PIN input.

Dispensing area/fueling station
Type: KAP system, galvanized
Area with ramps (mm): approx. 2,650 x 5,300
Area without ramps (mm): approx. 2,500 x 5,000
Pan height (mm): approx. 60
- Nationwide general building approval
- Approved for installation outdoors and in buildings
(For outdoor installation with folding cover and passing pipes)
- 2 collection basins, each with a volume of 150 liters.

=====

Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees at our company.
We also offer affordable delivery upon request.
You can inspect our systems at any time.
Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises.
Have we convinced you of our offer?
If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the fuel station applies ex works Warstein, unloaded.
Delivery can be offered at a low cost for an additional charge.
Delivery time: upon agreement.
You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them.

Sincerely,
from Warstein
Tank & Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Vertical machining center PRIMINER VF 1300

Bayern

8,093 km

Vertical machining center
PRIMINERVF 1300

€49,000

To the auction

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Lredpfx Amozlh S Astep Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

See details

Auction

Horizontal machining center OKUMA MA-600HB

Denmark

7,525 km

Horizontal machining center
OKUMAMA-600HB

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600-mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Dimensions & Weight Machine: 4800 x 2980 x 3150 – 21.5 t Tool magazine: 4500 x 2800 x 3150 - 6–7 t Lredpfx Amezlg U Astep Chip conveyor: 4500 x 1600 x 2400 – 2 t, including high-pressure pump Repo: 3000 x 1200 x 1500 mm, 0–0.5 t Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600-mm tools 2 pallets Balluff read/write system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage detection MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

See details

Auction

Baden-Württemberg

7,896 km

Knife grinding machine
Reform51

€12,990

To the auction

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 6624, total width: 1,000 mm, total length: 3,200 mm, total height: 1,800 mm, input voltage: 400 V, table length: 1,300 mm, power: 13.5 kW (18.35 HP), No minimum price – guaranteed sale to the highest bidder! Lodpjzlfm Defx Amtjrp The machine has been cleaned, repainted, and tested for functionality. TECHNICAL DETAILS Length of magnetic grinding table: 1,300 mm Drive: 13.5 kW Magnetic table: swiveling MACHINE DETAILS Dimensions (L x W x H): 3,200 x 1,000 x 1,800 mm EQUIPMENT Water cleaning with filter cloth Guide rail Separate control cabinet Separate control panel

See details

Auction

5-axis simultaneous machining center DMG Mori DMU 70 eVo linear

Bayern

8,019 km

5-axis simultaneous machining center
DMG MoriDMU 70 eVo linear

€51,000

To the auction

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,250 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, controller model: Heidenhain Mill Plus, spindle speed (max.): 18,000 rpm, In 2015, a new spindle was installed! TECHNICAL DETAILS Travel range X-axis: 710 mm Travel range Y-axis: 520 mm Travel range Z-axis: 520 mm Maximum spindle speed: 18,000 RPM Ledpfx Aozldqnomtsrp Number of tool magazine slots: 30 Tool holder: SK40 Distance between T-slots: 63 mm Rotational speed of the 4th axis max.: 40 RPM Rotational speed of the 5th axis max.: 40 RPM 4th axis swivel range: 360 x 0.001 degrees 5th axis swivel range: 0 ± 102 x 0.001 degrees MACHINE DETAILS Control system model: Heidenhain - Mill Plus Operating hours: currently 36,500 hours Spindle hours: currently 17,250 hours EQUIPMENT Programmable coolant nozzles Coolant gun Chip conveyor 40 bar internal coolant system with 600 l paper filter system Measuring probe 3D Quickset Laser tool measurement Visiport Handwheel Signal light Operating mode 4

See details

Auction

Measuring system FARO QUANTUM X.S Max Arm 2.5m

Sankt Gallen

8,068 km

Measuring system
FAROQUANTUM X.S Max Arm 2.5m

€20,100

To the auction

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: X25S52452233, input voltage: 230 V, overall weight: 51 kg, arm reach: 2,500 mm, number of axes: 7, TECHNICAL DETAILS Arm reach: 2,500 mm Number of axes: 7 MACHINE DETAILS Ljdjzi Uktjpfx Amtjrp Type of input current: Alternating current (AC) Input voltage: 230 V Total weight: 51 kg Arm weight: approx. 8 kg EQUIPMENT Calibration kit Transport case Mounting plate 3 mm and 6 mm iProbes USB cable Power adapter, 230 V Rechargeable battery FARO Fold tripod Manufacturer's warranty until November 2026 Note: The seller can also offer the machine with FCA terms for an additional charge.

See details

Auction

Germany

8,022 km

Generator
Helvetica PowerHPY04080ASRH

€17,600

To the auction

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, power: 80 kW (108.77 HP), total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Generator set Model: HPYU04080 Rated power: 80 kW / 100 kVA Altitude: ≤ 1,000 m Voltage: 400 V Current: 144.34 A Frequency: 50 Hz Speed: 1,500 rpm Ledpfezi D N Sjx Amtjrp Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 205 g/kWh Diesel engine Manufacturer: Yunnei Euro5 Rated power: 103 kW Engine model: DEF47CZKA5 Number of cylinders: 4 Bore x stroke: 110 x 124 mm Displacement: 4.7 l Starting system: 24 V DC electric start Cooling: water-cooled Overload capacity: 110% Compression ratio: 17.2 ± 1 : 1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP274C Rated power: 80 kW / 100 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1% Voltage fluctuation rate: ≤ ±0.5% Transient voltage regulation: +20% / -15% Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1% Frequency fluctuation rate: ≤ ±0.5% Transient frequency regulation: +10% / -7% Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions: 2,900 x 1,150 x 1,600 mm Weight: 1,550 kg EQUIPMENT Super-silent design ATS, automatic mains failure Remote control CEE sockets with fuses Oil and water heater Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase four-wire system AVR, automatic voltage regulator Electronically controlled high-pressure common rail injection system Electronic speed governor Turbocharging and intercooling with EGR, DOC and DPF

See details

Auction

Germany

8,022 km

Generator
Helvetica PowerHPY04050ASRH

€14,660

To the auction

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, power: 50 kW (67.98 HP), total length: 2,300 mm, total width: 1,050 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Lsdpszi D Ihefx Amtsrp Diesel generator, NEW! TECHNICAL DETAILS Generator set Model: HPYU04050 Rated power: 50 kW / 63 kVA Altitude: ≤ 1,000 m Voltage: 400 V Current: 79.39 A Frequency: 50 Hz Speed: 1,500 rpm Dimensions: 2,300 x 1,050 x 1,450 mm Weight: 1,350 kg Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 205 g/kWh Diesel engine Manufacturer: Yunnei Euro5 Rated power: 50 kW Engine model: DEF30CZJA5 Number of cylinders: 4 Bore x Stroke: 95 x 105 mm Displacement: 3.0 l Starting system: 12 V DC electric start Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110 % Compression ratio: 17.5 ± 1 : 1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP 224E Rated power: 50 kW / 63 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1 % Voltage fluctuation rate: ≤ ±0.5 % Transient voltage regulation: +20 % / -15 % Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1 % Frequency fluctuation rate: ≤ ±0.5 % Transient frequency regulation: +10 % / -7 % Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,050 x 1,450 mm Weight: 1,350 kg EQUIPMENT Super-silent design Remote control Oil and water heater ATS (Automatic Transfer Switch) Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase four-wire system AVR, automatic voltage regulator TDI turbocharger Electronic speed governor

See details

Auction

Germany

8,022 km

Generator
Helvetica PowerHP100S1ASR

€8,250

To the auction

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: diesel, power: 100 kW (135.96 HP), total length: 2,600 mm, total width: 1,150 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! TECHNICAL DETAILS Model: HP100S1ASR Rated power: 100 kW / 125 kVA Altitude: ≤ 1,000 m Voltage: 400 V Current: 180.43 A Frequency: 50 Hz Speed: 1,500 rpm Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 225 g/kWh Diesel engine Manufacturer: Ricardo Kofo Engine model: 4RT55-110D Rated power: 110 kW Number of cylinders: 4 Bore x Stroke: 110 x 140 mm Displacement: 5.32 l Starting system: 24 V DC electric start Lredpszi D Ibjfx Amtsp Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110% Compression ratio: 17 : 1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP274D Rated power: 100 kW / 125 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1 % Voltage fluctuation rate: ≤ ±0.5 % Transient voltage regulation: +20 % / -15 % Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1 % Frequency fluctuation rate: ≤ ±0.5 % Transient frequency regulation: +10 % / -7 % Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,600 x 1,150 x 1,450 mm Weight: 1,495 kg EQUIPMENT Super-silent design Remote control CEE sockets Fuses ATS (Automatic Transfer Switch) Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase, four-wire system AVR (Automatic Voltage Regulator) Direct injection Electronic speed governor

See details

Auction

Germany

8,022 km

Generator
Helvetica PowerHP080S1ASR

€6,460

To the auction

Condition: new, Year of construction: 2025, functionality: fully functional, power: 80 kW (108.77 HP), total length: 2,500 mm, total width: 1,150 mm, total height: 1,300 mm, rotational speed (max.): 1,500 rpm, No minimum price – guaranteed sale to the highest bidder! Diesel generator, NEW! Lredpfxozi Dpfo Amtsp TECHNICAL DETAILS Rated power: 80 kW / 100 kVA Voltage: 400 V Current: 144.34 A Frequency: 50 Hz Speed: 1,500 rpm Noise level LP7m: ≤ 68 dB Fuel consumption at 100% load: ≤ 225 g/kWh Diesel engine Manufacturer: Ricardo Kofo Rated power: 88 kW Engine model: 4RT55-88D Number of cylinders: 4 Bore x Stroke: 110 x 140 mm Displacement: 5.32 l Starting system: 24 V DC electric start Cooling: water-cooled Intake: naturally aspirated Overload capacity: 110% Compression ratio: 17:1 Speed: 1,500 rpm Generator Manufacturer: HELVETICA POWER Model: HP274C Rated power: 80 kW / 100 kVA Voltage: 230 V / 400 V Frequency: 50 Hz Protection class: IP23 Power factor: cos φ = 0.8 MACHINE DETAILS Voltage and frequency regulation Static voltage regulation: ≤ ±1% Voltage fluctuation rate: ≤ ±0.5% Transient voltage regulation: +20% / -15% Voltage settling time: ≤ 1 s Static frequency regulation: ≤ ±1% Frequency fluctuation rate: ≤ ±0.5% Transient frequency regulation: +10% / -7% Frequency stabilization time: ≤ 3 s Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,150 x 1,300 mm Machine weight: 1,410 kg EQUIPMENT Super-silent version Remote control CEE sockets 400 V - 63 A, 32 A, 16 A Socket 230 V - 16 A ATS, automatic mains transfer switch Plastic film and tarpaulin cover Brushless Stamford replica, 100% copper Three-phase, four-wire system AVR, automatic voltage regulator Direct injection Electronic speed governor

See details

Auction

Emergency generator with electric start Helvetica Power HP9000SE

Germany

8,022 km

Emergency generator with electric start
Helvetica PowerHP9000SE

€999

To the auction

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 540 mm, total length: 920 mm, total height: 760 mm, fuel: diesel, rotational speed (min.): 3,000 rpm, power: 7.7 kW (10.47 HP), No minimum price – guaranteed sale to the highest bidder! Emergency generator, NEW! TECHNICAL DETAILS Power: 7.7 kW Rated power: 9 kVA Maximum speed: 3,000 rpm Noise level: 71 dB Lodpfszi Dgwsx Amtjrp MACHINE DETAILS Cooling type: Air-cooled Fuel: Diesel Output voltage: 400 V Output current: 13 A Output frequency: 50 Hz Type of output current: Three-phase Dimensions & Weight Dimensions L x W x H: 920 x 540 x 760 mm Total weight: 159 kg FEATURES CE-compliant Electric starter (e-start) Noise-reduced, silent version AVR system, automatic voltage regulation Air-cooled Tank for at least 8 hours of operation under full load

See details