Liquid fertilizer AHL/ASL 100,000 liters

Year of construction

2000

Condition

Used

Location

Warstein

Liquid fertilizer AHL/ASL 100,000 liters

Show map

Machine data

Machine type:: Liquid fertilizer AHL/ASL 100,000 liters

Year of construction:: 2000

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A299-0865

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack specialized company according to the Water Resources Act .

Dear Sir or Madam,
we offer a 100,000 liter double-walled storage tank for the storage of liquid fertilizer as follows .

The storage tank is equipped from the inside with a brand new plastic inner shell ,
resistant to the storage of liquid fertilizer equipped .
Iajdpfx Ajc Nk Evoacsn
An acoustic leakage warning device is mounted outside in a protective box (lockable).
The storage tank additionally still double-walled steel.

The plastic inner shell has a general building approval .
And is therefore suitable and approved for the storage of liquid fertilizer AHL and NOX reducer AUS32 AdBlue.

Nominal capacity 100 cbm
Piece 1
used but overhauled, i.e. the tank is cleaned, refurbished, primed and painted
Color equipment lacquer RAL ; . However, you can always bring your own color wishes.
Material steel in steel, material S235JRG2
Documents Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate
Piece. 1 dipstick
Piece. 1 venting nozzle
piece. 1 filling nozzle 3 inch V2a stainless steel new installed
Piece. 1 new acoustic leakage warning device for the double wall
Piece. 1 ladder
piece. 1 suction line 3 inch V2A stainless steel new installed.
Form . cylindrical storage tank with feet/console

tank mass length ca 15.750 mm

diameter ca 2.900 mm

Weight approx. 16.500. kg

Storage above ground

Top on offer . Liquid fertilizer - AHL tank systems in the size of 5,000-100,000 liters.
Water tanks firefighting water tank .

Of course you can also design your tank system!

All our installations are extensively checked and inspected in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

If you have any questions or requests, just call us, one of our experienced employees will be glad to advise you.

Price/ Shipping

The price for the gas station is valid ex location Warstein, free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank installations and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein

Tank and environmental protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Wide belt sander with dust extraction HEESEMANN MFA 6

Nordrhein-Westfalen

7,742 km

Wide belt sander with dust extraction
HEESEMANNMFA 6

€15,100

To the auction

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Iaedpfx Aajyg Exqocsn Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

See details

Auction

Niedersachsen

7,674 km

Cold saw
BEHRINGER EISELEHCS 150

€10,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, cutting speed: 40 mm/min, overall weight: 4,500 kg, workpiece diameter (max.): 150 mm, control type: PLC-controlled, TECHNICAL DETAILS Max. round material: 150 mm Max. flat material: 135 mm Saw blade feed: 0.5 - 40 mm/min Single compartment load max.: 500 kg at 3 m bar length Total load: 4,000 kg Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Ijdpfxoygim Ee Aacoan MACHINE DETAILS Control: Siemens - PLC control Dimensions & Weight Required space: 9.3 m x 7.5 m Weight: 4,500 kg Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 bar EQUIPMENT Infeed magazine Cut-off disposal Compartments incl. roller conveyor: 11 pcs Conveyor manufacturer: Geppert

See details

Auction

Бургас

9,471 km

Industrial robot
KUKAKR 500 (2x)

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 420 kg, arm reach: 3,326 mm, controller model: KRC2 ed05, repeat accuracy: 0.06 mm, number of axes: 6, Auction of a set consisting of 1x KUKA KR500 L340-2 & 1x KUKA KR500 L420-2! TECHNICAL DETAILS Rated payload KR500 L340-2: 340 kg Rated payload KR500 L420-2: 420 kg Reach KR500 L340-2 max.: 3,326 mm Reach KR500 L420-2 max.: 3,076 mm Repeatability (ISO 9283): ±0.06 mm Range of motion A1: ±185° A2: -40° / +110° A3: -184° / +60° A4: ±350° A5: ±118° A6: ±350° Speed at rated payload A1: 69 °/s A2: 69 °/s A3: 69 °/s A4: 77 °/s A5: 76 °/s A6: 120 °/s MACHINE DETAILS Controller: KRC2 ed05 Number of axes: 6 Mounting position: Floor Ambient temperature (storage/transport): -40 °C to 60 °C EQUIPMENT Manipulator Iedpfsygia Sox Aacoan KRC2 ed05 control cabinet Complete cable set Teach pendant

See details

Auction

Injection molding machine + automation Ferromatik Milacron Magna T MTs 275-1540 + Handling

Bayern

8,194 km

Injection molding machine + automation
FerromatikMilacron Magna T MTs 275-1540 + Handling

€41,000

To the auction

Condition: not inspected (used), Year of construction: 2018, operating hours: 3,731 h, functionality: unexamined, machine/vehicle number: DS901DA010011, clamping force: 2,750 kN, screw diameter: 50 mm, injection pressure: 1,530 bar, opening stroke: 610 mm, controller model: ENDURA touch, The machine was operational until 2022 and was then professionally dismantled. Since that time, the machine has not been used again. TECHNICAL DETAILS Clamping force: 2,750 kN Platen spacing: 1,560 mm Tie bar distance: 660 x 660 mm Opening stroke: 610 mm Screw diameter: 50 mm Injection pressure: 1,530 bar Max. injection flow rate: 523–1,530 cm³/s MACHINE DETAILS Iajdpfoyf Hfpsx Aacsn Control system: ENDURA touch Cabin protection: Fully enclosed cabin Tie bar arrangement: horizontal Oil tank: 900 l Operating voltage: 400 V / 50 Hz Power consumption: 219 A Footprint: 9,000 x 4,200 x 2,900 mm Operating hours: 3,731 h AUTOMATION EQUIPMENT Fully enclosed cabin with safety door Kuka 6-axis robot KR 20 R 1810 with Gimatec QC 90-A gripper adapter KUKA 6-axis robot KR 6 R900 with QC 50-A gripper adapter Handheld control panel Marking laser with scanner and extraction unit Multi-level conveyor system with lift unit Base frame and transfer station Base frame with automatic screw feeder 4-cavity removal gripper 6827137 1+1 handling gripper 6827137 4-cavity removal gripper 7936450 4-cavity removal gripper 7936449 2+2 handling gripper 7936449 Note: The dosing unit shown is not included in the scope of delivery and sale. One of the machine's hydraulic hoses is leaking (see pictures).

See details

Auction

Vertical machining center Haas VF-5/40XT

England

7,102 km

Vertical machining center
HaasVF-5/40XT

€18,000

To the auction

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Iaedjyf E D Rspfx Aacjn Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

See details

Auction

Baden-Württemberg

7,958 km

3-axis robot
System 3RWorkpartner

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0505-V00-003, load capacity: 80 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Iasdpfx Asyfu Rgjacon Transfer weight: 80 kg Lift (arms): 1,500 mm EQUIPMENT 1 magazine (20 pallets) 20 pallets, System 3R GPS 240 Clamping plate 20-M10 Modular SPREITZER clamping block/fixed block unit Set-up station with pneumatic swing clamp Zero-point clamping system System 3R GPS 240

See details

Auction

Baden-Württemberg

7,958 km

3-axis robot
System 3RWorkpal 1

€12,000

To the auction

Auction

3-axis robot System 3R Transformer Workmaster

Baden-Württemberg

7,958 km

3-axis robot
System 3RTransformer Workmaster

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 150 kg, stroke length: 1,500 mm, TECHNICAL DETAILS Transfer weight: 150 kg Lift (arms): 1,500 mm MACHINE DETAILS Number of magazines: 2 Capacity per magazine: 12 pallets EQUIPMENT 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZS 260-125 A Ijdoyfuwgjpfx Aacoan 12 pallets, System 3R GPS 240 with mechanical centering vise SPREITZER MZU 170-60 Zero-point clamping system System 3R GPS 240

See details

Auction

Baden-Württemberg

7,958 km

Vertical machining center
HaasVF 3

€16,500

To the auction

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Iaodpeyfuq Tefx Aacen Internal coolant supply

See details

Auction

Vertical machining center Chiron Mill 800

Baden-Württemberg

7,958 km

Vertical machining center
ChironMill 800

€16,000

To the auction

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) Iedpfx Aoyfum Ujacsan System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply

See details