T-slots floor plates - test field

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table Knodpfxjz Aplxs Akweb MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Kjdpfez Apllex Akwenb Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Ksdpjzzlc Rjfx Akwonb Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kedpfx Akezzk Rmewenb Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Knjdszzkwgepfx Akwjb Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, total width: 28,500 mm, shelf height: 4,500 mm, carrying capacity per cantilever arm: 1,000 kg, distance between stands: 1,500 mm, load capacity per stand: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! The sale includes the entire shelving system. TECHNICAL DETAILS Number of uprights: 19 Number of arms: 38 Total load capacity per upright: 2,000 kg Load capacity per arm: 1,000 kg Arm length: 1,250 mm Upright height: 4,500 mm Base length: 1,200 mm Distance between uprights: 1,500 mm Knsdpfx Ajzzda Uskwsb

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 85 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Knedpozzbfbjfx Akwob Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Operating hours: 926 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Kodjzzbdwepfx Akwjnb Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Power: 7.5 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total width: 5,440 mm, total height: 2,000 mm, total length: 1,700 mm, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Voltage: 380 V Knodpfx Akozzbc Toweb Current draw: 85 A Fuse rating: 100 A Power: 38 kW Dimensions (L x W x H): 1,700 x 5,440 x 2,000 mm Shipping packages: 1 unit EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! Ksdpfjzzbc Hjx Akwsnb TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking