Single Screw Extruder 25/25 LD

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1.073.14, TECHNICAL DETAILS Infeed table length: 8,360 mm Outfeed table length: 2,750 mm MACHINE DETAILS Dodpfx Adjygilhevjun Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,400 x 2,400 mm Weight: 2,500 kg Transport packages: 3 units Voltage: 400 V Fuse: 25 A Power: 11.0 kW EQUIPMENT Automatic feed system

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including Duedpfxsiyyf Ie Advsn die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 12 m/min, edge thickness (max.): 10 mm, overall weight: 1,530 kg, rotational speed (max.): 12,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS Panel height: 1,060 mm Maximum edge thickness: 10 mm Minimum panel length: 140 mm Minimum panel width: 85 mm Feed speed: 12 m/min Sanding Unit Motor power: 2.4 HP Speed: 12,000 rpm Tool diameter: 80 mm Extraction port diameter: 60 mm Gluing Unit Glue pot capacity: 2 kg Glue application roller diameter: 25 mm Pressure roller cutter, large roller diameter: 100 mm Pressure roller cutter, small roller diameter: 80 mm End Trimming Unit Motor power: 1.07 HP Maximum tool diameter: 140 mm Extraction port diameter: 80 mm Milling Unit Motor power: 0.87 HP Tool diameter: 70 mm Extraction port diameter: 80 mm Scraper Unit Extraction port diameter: 60 mm Joint Scraper Unit Extraction port diameter: 60 mm MACHINE DETAILS Compressed air connection: 7 bar Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,000 x 1,600 mm Dodsyf Ed Repfx Advjun Weight: 1,530 kg EQUIPMENT Electronic control panel with USB port Sintra software Touch probe devices Vertical and front touch probe devices with rotating discs Removable panel support arm

Condition: not inspected (used), functionality: unexamined, feed rate X-axis: 30 m/min, edge thickness (max.): 25 mm, overall weight: 3,500 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Edge thickness min: 0.6 mm Edge thickness max: 25 mm Coil material thickness min: 0.3 mm Coil material thickness max: 3 mm Panel height min: 10 mm Panel height max: 60 mm Panel width min: 70 mm Feed speed: 8-30 m/min Extraction port diameter: 120 mm Blade diameter: 140 mm Blade spindle speed: 12,000 rpm Milling unit Milling unit tool diameter: 80 mm Milling unit motor power: 0.75 kW Milling unit spindle speed: 12,000 rpm Chamfering unit Chamfering tool diameter: 80 mm Chamfering motor power: 0.75 kW Chamfering spindle speed: 12,000 rpm Rounding unit Rounding unit motor power: 0.35 kW Rounding unit spindle speed: 12,000 rpm Sanding machine Oscillating sanding motor power: 1.5 kW Dedpfx Asyf Ebvjdvsun Oscillating sanding speed: 1,400 rpm Brushing unit Brushing unit motor power: 0.3 kW Brushing unit speed: 1,450 rpm Compressed air requirement: 6 bar MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,200 mm x 1,500 mm x 1,650 mm Weight: 3,500 kg EQUIPMENT Fully automatic edge banding machine Sanding unit Processing of wood, veneer, PVC, ABS, and furniture edges CE certification Automatic pressure beam lifting Controlled guidance prior to sanding Group of 2 sanding units Glue pot with pre-melting unit Pneumatic pressure rollers Soundproof safety enclosure Tilting end trimming unit Edge sanding unit Feed speed variator

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Dodpoq R Tkwsfx Advoun Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 201011RX000004, feed rate X-axis: 20 m/min, workpiece height (max.): 120 mm, edge thickness (max.): 16 mm, overall weight: 2,400 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Panel thickness min./max.: 10 mm / 120 mm Panel length min.: 140 mm Panel width min.: 60 mm Edge thickness: 0.4 mm - 16 mm Variable feed rate: 10-20 m/min Edge height: 120 mm MACHINE DETAILS Installed power: 22 kW Compressed air: 6 bar Dsdeyf D Ubopfx Advjun Dimensions & Weight Dimensions (L x W x H): 6,730 x 1,500 x 1,910 mm Weight: 2,400 kg EQUIPMENT 10.7" color electronic touchscreen control Servo-controlled axis infeed guide Section 2 pre-milling unit - motors 2.2 kW - 6,000 rpm - diamond tools 100 mm x 120 mm x 30 mm Infrared lamp 0-600°C - 600 Watt Cooling anti-adhesive spray system Automatic edge feeder Universal gluing station with pre-melter for PUR and EVA adhesives Quick-release glue pot Servo-controlled axis pressure units Roller edge trimming for 3 mm PVC/ABS Glue pot cleaning table End trimming unit with 2 tilting motors, each 0.50 kW - 12,000 rpm Tilting trimming unit with servo-controlled axis - motor 1.1 kW - 12,000 rpm Corner rounding unit with 2 motors - 0.22 kW - 12,000 rpm Pull-off unit with servo-controlled axis Glue scraping unit Buffing unit - 0.18 kW - 1,400 rpm Dryer unit 0-600°C - 4,000 Watt Soundproof enclosure Fixed panel support roller conveyor Extraction: 7 inlets Ø80 mm, 1 inlet Ø120 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah Duodpfeyf Dqijx Advon EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: not inspected (used), Tank, Plastic Tank, Liquid Storage, Liquid Tank, Used Machine Overall dimensions: Height 2500 mm Diameter 2000 mm Tank Capacity: 6 m3 Material: PE (Polyethylene) Manhole Diameter: 580 mm Liquid Drain, Filling Pipe Diameter: 100 mm There is no liquid level indicator, and we have not conducted a leak test on the tank. There are several pieces Duodpfx Adsra Daheven

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 21 kg, Auction of a Plymovent KUA-2/H! Dsdpfx Adoyf Dnheveun MACHINE DETAILS Net weight: 21 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, overall weight: 171 kg, total length: 1,200 mm, total width: 1,200 mm, total height: 1,300 mm, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,300 mm Duodeyf Ddpspfx Advon Weight: 171 kg Connected load: 400 V Refrigerant: 95 g / R134a Compressed air supply: 5-8 bar EQUIPMENT Printer: Star DP8340S

Year of construction: 2003, condition: good (used), functionality: fully functional, Platform with dual dispensing units. - Electrical cabinet Dsdpjudwl Usfx Advjun - suction - differential pressure gauge - safety - non-slip floor

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Dedpfx Adeyfhcijvoun

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AB00003274, overall weight: 865 kg, travel distance X-axis: 3,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 50 mm, TECHNICAL DETAILS Working area X-axis: 3,050 mm Working area Y-axis: 800 mm Working area Z-axis: 50 mm F10L drilling head: 10 spindles Dsdeyfg Ahjpfx Advsun Vertical drilling spindles: 7 (independent) Horizontal drilling spindles in X: 1 Horizontal drilling spindles in Y: 2 Integrated saw blade on X-axis: 1 MACHINE DETAILS Control: 7" touch screen display Weight: 865 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GAROS MDF 5600K ID.NO. 2689 Garos MDF 5600K Vacuum tumbler / Massage tumbler with cooling function. Capacity 5600 liters built-in vacuum pump & associated filling funnel included. Duedporzqzusfx Advsn Dimensions 520 x 210 cm Height 280 cm.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: CAI226536, overall weight: 810 kg, operating pressure: 8 bar, ambient temperature (max.): 40 °C, TECHNICAL DETAILS Dedpfxjyfgxij Advoun Working pressure: 8 bar Maximum inlet temperature: 40 °C Maximum ambient temperature: 40 °C MACHINE DETAILS Weight: 810 kg Voltage: 400 V Frequency: 50 Hz Power: 55 kW 3 phases